summaryrefslogtreecommitdiff
path: root/gschem
Commit message (Expand)AuthorAgeFilesLines
* do not attenuate tuner output at allHEADmasterrekado2015-04-182-5/+6
* board: place and connect C450rekado2015-04-101-30/+39
* place C450 on board, connected to external pin...rekado2015-04-101-10/+8
* board: load updated netlist, remove pinrekado2015-04-051-31/+35
* connect nets XOVER and PREAMP_2rekado2015-04-051-0/+2
* board.pcb: update to latest file formatrekado2015-04-051-1795/+1793
* remove superfluous pinrekado2015-04-051-11/+0
* add pin for preamp2 out / xover inrekado2015-04-051-2/+11
* swap crossover outputrekado2013-08-081-9/+9
* add indicator LED for crossoverrekado2013-08-071-6/+17
* add output jacksrekado2013-08-051-2/+29
* add missing coupling capacitorrekado2013-08-041-37/+39
* update component names / silk screenrekado2013-01-255-105/+121
* 3 mounting holes: M2x0.4rekado2013-01-081-10/+7
* increase mount hole diameterrekado2013-01-021-942/+940
* reduce gain of melody preamp?rekado2013-01-021-0/+2
* move cap away from drill holerekado2013-01-021-19/+20
* remove out pins to -Vcc from boardrekado2013-01-012-77/+88
* remove outdated commentrekado2013-01-011-3/+1
* increase route to pin clearancerekado2012-12-311-7/+7
* simplify routing of melody return caprekado2012-12-311-35/+28
* redesign...rekado2012-12-291-970/+1103
* bypass contacts are wired on the switch, off-boardrekado2012-12-291-14/+70
* remove melody buffer (preamp is buffered); remove trim potsrekado2012-12-292-94/+54
* correct namerekado2012-12-281-1/+1
* connect only one of the jack switchesrekado2012-12-282-22/+21
* reduce gain/distortion...rekado2012-12-271-1/+1
* don't roll off low frequencies in bass preamprekado2012-12-271-1/+1
* pins to connect offboard blend potrekado2012-12-271-1/+21
* put inputs on -Vcc when nothing is connectedrekado2012-12-271-3/+9
* improve coupling at mixerrekado2012-12-261-20/+66
* add coupling caps to return; remove from mixerrekado2012-12-261-148/+190
* update all coupling caps to 10uF...rekado2012-12-264-18/+18
* clean up middle sectionrekado2012-12-261-535/+535
* remove coupling capsrekado2012-12-261-123/+122
* connect reference voltage via resistor; reduce cap valuerekado2012-12-232-70/+132
* replace power filtering resistor with inductorrekado2012-12-022-30/+32
* replace another JFET with NPN transistorrekado2012-11-262-103/+98
* replace JFET with NPN transistorrekado2012-11-262-101/+100
* place and connect transistor in tuner mixerrekado2012-11-261-271/+273
* add NPN transistor to make mixer activerekado2012-11-262-156/+247
* add transistor after bass blend potsrekado2012-11-254-262/+466
* update board to latest schematic changesrekado2012-11-231-62/+85
* reminders to add buffers/active mixersrekado2012-11-232-4/+7
* add shunt resistor to outputrekado2012-11-231-8/+17
* update boardrekado2012-11-221-1016/+834
* add jumper to connect Vcc netsrekado2012-11-221-1/+14
* move power rails filtering to power supplyrekado2012-11-222-180/+135
* rename power connector to make it appear on PCBrekado2012-11-221-3/+3
* more biasing with reference voltagerekado2012-11-221-60/+8