diff options
Diffstat (limited to 'gschem')
| -rw-r--r-- | gschem/board.pcb | 2 | ||||
| -rw-r--r-- | gschem/tuner.sch | 9 |
2 files changed, 6 insertions, 5 deletions
diff --git a/gschem/board.pcb b/gschem/board.pcb index a8d3c6d..f0b1e59 100644 --- a/gschem/board.pcb +++ b/gschem/board.pcb @@ -1554,7 +1554,7 @@ Element["hidename" "R025" "L1" "1mH" 2850.00mil 2300.00mil -180.00mil -20.00mil ) -Element["hidename" "R025" "R330" "33k" 2200.00mil 2725.00mil 120.00mil -20.00mil 0 100 ""] +Element["hidename" "R025" "R330" "0" 2200.00mil 2725.00mil 120.00mil -20.00mil 0 100 ""] ( Pin[0.0000 0.0000 68.00mil 30.00mil 74.00mil 38.00mil "1" "1" "square,edge2"] Pin[400.00mil 0.0000 68.00mil 30.00mil 74.00mil 38.00mil "2" "2" "edge2"] diff --git a/gschem/tuner.sch b/gschem/tuner.sch index 6baaf8b..e08544b 100644 --- a/gschem/tuner.sch +++ b/gschem/tuner.sch @@ -1,4 +1,4 @@ -v 20110115 2 +v 20130925 2 C 49800 41200 1 270 0 resistor-2.sym { T 50150 40800 5 10 0 0 270 0 1 @@ -209,14 +209,15 @@ device=RESISTOR T 50100 41900 5 10 1 1 0 0 1 refdes=R330 T 50100 41700 5 10 1 1 0 0 1 -value=33k +value=0 T 49800 42400 5 10 0 1 0 0 1 footprint=R025 } N 49900 42400 49900 42500 4 N 51400 41300 49900 41300 4 -T 50100 42200 9 10 1 0 0 0 1 -TODO: figure out by just how much the signal should be attenuated. +T 50100 42200 9 10 1 0 0 0 2 +TODO: 33k is too much in my experience. +Bridging this with a wire works fine for me. C 50000 48400 1 270 0 resistor-2.sym { T 50350 48000 5 10 0 0 270 0 1 |