From 699d59b38b5699d578288d3126a08a360c6086f1 Mon Sep 17 00:00:00 2001 From: Masamichi Hosoda Date: Wed, 14 Sep 2016 21:30:53 +0900 Subject: Issue 4969: Update texinfo.tex from upstream texinfo.tex ver. 2016-09-17.16 It is newer than Texinfo-6.3's. --- tex/texinfo.tex | 922 ++++++++++++++++++++++++++++++-------------------------- 1 file changed, 487 insertions(+), 435 deletions(-) diff --git a/tex/texinfo.tex b/tex/texinfo.tex index 79bc925655..fad2bc4dc3 100644 --- a/tex/texinfo.tex +++ b/tex/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2016-07-20.14} +\def\texinfoversion{2016-09-17.16} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, @@ -862,36 +862,6 @@ where each line of input produces a line of output.} \temp } -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). This command -% is not documented, not supported, and doesn't work. -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} - % @include FILE -- \input text of FILE. % \def\include{\parseargusing\filenamecatcodes\includezzz} @@ -1108,9 +1078,14 @@ where each line of input produces a line of output.} % For LuaTeX % +\newif\iftxiuseunicodedestname +\txiuseunicodedestnamefalse % For pdfTeX etc. + \ifx\luatexversion\thisisundefined \else - % Escape PDF strings UTF-8 to UTF-16 + % Use Unicode destination names + \txiuseunicodedestnametrue + % Escape PDF strings with converting UTF-16 from UTF-8 \begingroup \catcode`\%=12 \directlua{ @@ -1138,7 +1113,24 @@ where each line of input produces a line of output.} end } \endgroup - \def\pdfescapestring#1{\directlua{UTF16oct('\luaescapestring{#1}')}} + \def\pdfescapestrutfsixteen#1{\directlua{UTF16oct('\luaescapestring{#1}')}} + % Escape PDF strings without converting + \begingroup + \directlua{ + function PDFescstr(str) + for c in string.bytes(str) do + if c <= 0x20 or c >= 0x80 or c == 0x28 or c == 0x29 or c == 0x5c then + tex.sprint( + string.format(string.char(0x5c) .. string.char(0x25) .. '03o', + c)) + else + tex.sprint(string.char(c)) + end + end + end + } + \endgroup + \def\pdfescapestring#1{\directlua{PDFescstr('\luaescapestring{#1}')}} \ifnum\luatexversion>84 % For LuaTeX >= 0.85 \def\pdfdest{\pdfextension dest} @@ -1199,6 +1191,14 @@ where each line of input produces a line of output.} \xdef#1{\pdfescapestring{#1}}% \fi } +\def\txiescapepdfutfsixteen#1{% + \ifx\pdfescapestrutfsixteen\thisisundefined + % No UTF-16 converting macro available. + \txiescapepdf{#1}% + \else + \xdef#1{\pdfescapestrutfsixteen{#1}}% + \fi +} \newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images with PDF output, and none of those formats could be found. (.eps cannot @@ -1308,19 +1308,77 @@ output) for that.)} \pdfrefximage \pdflastximage \fi} % - \def\pdfmkdest#1{{% + \def\setpdfdestname#1{{% % We have to set dummies so commands such as @code, and characters % such as \, aren't expanded when present in a section title. \indexnofonts \makevalueexpandable \turnoffactive - % Use ASCII approximations in destination names. - \passthroughcharsfalse + \iftxiuseunicodedestname + \ifx \declaredencoding \latone + % Pass through Latin-1 characters. + % LuaTeX with byte wise I/O converts Latin-1 characters to Unicode. + \else + \ifx \declaredencoding \utfeight + % Pass through Unicode characters. + \else + % Use ASCII approximations in destination names. + \passthroughcharsfalse + \fi + \fi + \else + % Use ASCII approximations in destination names. + \passthroughcharsfalse + \fi \def\pdfdestname{#1}% \txiescapepdf\pdfdestname - \safewhatsit{\pdfdest name{\pdfdestname} xyz}% }} % + \def\setpdfoutlinetext#1{{% + \indexnofonts + \makevalueexpandable + \turnoffactive + \ifx \declaredencoding \latone + % The PDF format can use an extended form of Latin-1 in bookmark + % strings. See Appendix D of the PDF Reference, Sixth Edition, for + % the "PDFDocEncoding". + \passthroughcharstrue + % Pass through Latin-1 characters. + % LuaTeX: Convert to Unicode + % pdfTeX: Use Latin-1 as PDFDocEncoding + \def\pdfoutlinetext{#1}% + \else + \ifx \declaredencoding \utfeight + \ifx\luatexversion\thisisundefined + % For pdfTeX with UTF-8. + % TODO: the PDF format can use UTF-16 in bookmark strings, + % but the code for this isn't done yet. + % Use ASCII approximations. + \passthroughcharsfalse + \def\pdfoutlinetext{#1}% + \else + % For LuaTeX with UTF-8. + % Pass through Unicode characters for title texts. + \passthroughcharstrue + \def\pdfoutlinetext{#1}% + \fi + \else + % For non-Latin-1 or non-UTF-8 encodings. + % Use ASCII approximations. + \passthroughcharsfalse + \def\pdfoutlinetext{#1}% + \fi + \fi + % LuaTeX: Convert to UTF-16 + % pdfTeX: Use Latin-1 as PDFDocEncoding + \txiescapepdfutfsixteen\pdfoutlinetext + }} + % + \def\pdfmkdest#1{% + \setpdfdestname{#1}% + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + } + % % used to mark target names; must be expandable. \def\pdfmkpgn#1{#1} % @@ -1348,36 +1406,13 @@ output) for that.)} % page number. We could generate a destination for the section % text in the case where a section has no node, but it doesn't % seem worth the trouble, since most documents are normally structured. - { - \ifx\luatexversion\thisisundefined \else - \turnoffactive % LuaTeX can use Unicode strings for PDF - \fi - \edef\pdfoutlinedest{#3}% - \ifx\pdfoutlinedest\empty - \def\pdfoutlinedest{#4}% - \else - \txiescapepdf\pdfoutlinedest - \fi - % - % Also escape PDF chars in the display string. - \bgroup - \ifx \declaredencoding \latone - % The PDF format can use an extended form of Latin-1 in bookmark - % strings. See Appendix D of the PDF Reference, Sixth Edition, for - % the "PDFDocEncoding". - \passthroughcharstrue - \fi - \ifx \declaredencoding \utfeight - % TODO: the PDF format can use UTF-16 in bookmark strings, but the - % code for this isn't done yet. - \fi - \globaldefs=1 - \edef\pdfoutlinetext{#1}% - \txiescapepdf\pdfoutlinetext - \egroup - % - \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% - } + \setpdfoutlinetext{#1} + \setpdfdestname{#3} + \ifx\pdfdestname\empty + \def\pdfdestname{#4}% + \fi + % + \pdfoutline goto name{\pdfmkpgn{\pdfdestname}}#2{\pdfoutlinetext}% } % \def\pdfmakeoutlines{% @@ -1535,7 +1570,6 @@ output) for that.)} % % For XeTeX % -\newif\iftxiuseunicodedestname \ifx\XeTeXrevision\thisisundefined \else % @@ -1543,73 +1577,125 @@ output) for that.)} % \ifnum\strcmp{\the\XeTeXversion\XeTeXrevision}{0.99996}>-1 % TeX Live 2016 contains XeTeX 0.99996 and xdvipdfmx 20160307. - % It can be used `dvipdfmx:config' special (from TeX Live SVN r40941). - % For avoiding PDF destination name replacement, we use the special - % instead of xdvipdfmx commandline option `-C 0x0010'. + % It can use the `dvipdfmx:config' special (from TeX Live SVN r40941). + % For avoiding PDF destination name replacement, we use this special + % instead of xdvipdfmx's command line option `-C 0x0010'. \special{dvipdfmx:config C 0x0010} - % XeTeX 0.99995+ contains xdvipdfmx 20160307+. - % It can handle Unicode destination name for PDF. + % XeTeX 0.99995+ comes with xdvipdfmx 20160307+. + % It can handle Unicode destination names for PDF. \txiuseunicodedestnametrue \else - % XeTeX < 0.99996 (TeX Live < 2016) cannot be used + % XeTeX < 0.99996 (TeX Live < 2016) cannot use the % `dvipdfmx:config' special. % So for avoiding PDF destination name replacement, - % xdvipdfmx commandline option `-C 0x0010' is necessary. + % xdvipdfmx's command line option `-C 0x0010' is necessary. % - % XeTeX < 0.99995 can not handle Unicode destination name for PDF - % because xdvipdfmx 20150315 has UTF-16 convert issue. - % It fixed by xdvipdfmx 20160106 (TeX Live SVN r39753). + % XeTeX < 0.99995 can not handle Unicode destination names for PDF + % because xdvipdfmx 20150315 has a UTF-16 conversion issue. + % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753). \txiuseunicodedestnamefalse \fi % + % Color support + % + \def\rgbDarkRed{0.50 0.09 0.12} + \def\rgbBlack{0 0 0} + % + \def\pdfsetcolor#1{\special{pdf:scolor [#1]}} + % + % Set color, and create a mark which defines \thiscolor accordingly, + % so that \makeheadline knows which color to restore. + \def\setcolor#1{% + \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \domark + \pdfsetcolor{#1}% + } + % + \def\maincolor{\rgbBlack} + \pdfsetcolor{\maincolor} + \edef\thiscolor{\maincolor} + \def\lastcolordefs{} + % + \def\makefootline{% + \baselineskip24pt + \line{\pdfsetcolor{\maincolor}\the\footline}% + } + % + \def\makeheadline{% + \vbox to 0pt{% + \vskip-22.5pt + \line{% + \vbox to8.5pt{}% + % Extract \thiscolor definition from the marks. + \getcolormarks + % Typeset the headline with \maincolor, then restore the color. + \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% + }% + \vss + }% + \nointerlineskip + } + % % PDF outline support % - % Emulate the primitive of pdfTeX + % Emulate pdfTeX primitive \def\pdfdest name#1 xyz{% - \special{pdf:dest (name#1) [@thispage /XYZ @xpos @ypos null]}% + \special{pdf:dest (#1) [@thispage /XYZ @xpos @ypos null]}% } - \def\pdfmkdest#1{{% + % + \def\setpdfdestname#1{{% % We have to set dummies so commands such as @code, and characters % such as \, aren't expanded when present in a section title. \indexnofonts + \makevalueexpandable + \turnoffactive \iftxiuseunicodedestname - \def\pdfdestname{#1}% Pass through Unicode characters. + % Pass through Unicode characters. \else - \edef\pdfdestname{#1}% Replace Unicode characters to ASCII. + % Use ASCII approximations in destination names. + \passthroughcharsfalse \fi - \turnoffactive - \makevalueexpandable + \def\pdfdestname{#1}% \txiescapepdf\pdfdestname - \safewhatsit{\pdfdest name{\pdfdestname} xyz}% }} % + \def\setpdfoutlinetext#1{{% + \turnoffactive + % Always use Unicode characters in title texts. + \def\pdfoutlinetext{#1}% + % For XeTeX, xdvipdfmx converts to UTF-16. + % So we do not convert. + \txiescapepdf\pdfoutlinetext + }} + % + \def\pdfmkdest#1{% + \setpdfdestname{#1}% + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + } + % + % by default, use black for everything. + \def\urlcolor{\rgbBlack} + \def\linkcolor{\rgbBlack} + \def\endlink{\setcolor{\maincolor}\pdfendlink} + % \def\dopdfoutline#1#2#3#4{% - \iftxiuseunicodedestname - \def\pdfoutlinedest{#3}% Pass through Unicode characters. - \else - \edef\pdfoutlinedest{#3}% Replace Unicode characters to ASCII. + \setpdfoutlinetext{#1} + \setpdfdestname{#3} + \ifx\pdfdestname\empty + \def\pdfdestname{#4}% \fi - \ifx\pdfoutlinedest\empty - \def\pdfoutlinedest{#4}% - \fi - { - \turnoffactive - \txiescapepdf\pdfoutlinedest - \edef\pdfoutlinetext{#1}% - \txiescapepdf\pdfoutlinetext - % - \special{pdf:out [-] #2 << /Title (\pdfoutlinetext) /A - << /S /GoTo /D (name\pdfoutlinedest) >> >> }% - } + % + \special{pdf:out [-] #2 << /Title (\pdfoutlinetext) /A + << /S /GoTo /D (\pdfdestname) >> >> }% } % \def\pdfmakeoutlines{% \begingroup % - % In the case of XeTeX, counts of subentries is not necesary. - % Therefore, read toc only once. + % For XeTeX, counts of subentries are not necessary. + % Therefore, we read toc only once. % - % We use the node names as the destinations. + % We use node names as destinations. \def\partentry##1##2##3##4{}% ignore parts in the outlines \def\numchapentry##1##2##3##4{% \dopdfoutline{##1}{1}{##3}{##4}}% @@ -1629,7 +1715,7 @@ output) for that.)} \let\unnsubsecentry\numsubsecentry% \let\unnsubsubsecentry\numsubsubsecentry% % - % In the case of XeTeX, xdvipdfmx converts strings to UTF-16. + % For XeTeX, xdvipdfmx converts strings to UTF-16. % Therefore, the encoding and the language may not be considered. % \indexnofonts @@ -1651,9 +1737,9 @@ output) for that.)} \special{pdf:docview << /PageMode /UseOutlines >> } % ``\special{pdf:tounicode ...}'' is not necessary % because xdvipdfmx converts strings from UTF-8 to UTF-16 without it. - % However, due to UTF-16 convert issue of xdvipdfmx 20150315, - % ``\special{pdf:dest ...}'' can not handle non-ASCII strings. - % It fixed by xdvipdfmx 20160106 (TeX Live SVN r39753). + % However, due to a UTF-16 conversion issue of xdvipdfmx 20150315, + % ``\special{pdf:dest ...}'' cannot handle non-ASCII strings. + % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753). % \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax @@ -1713,7 +1799,7 @@ output) for that.)} {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} \def\pdflink#1{% \special{pdf:bann << /Border [0 0 0] - /Type /Annot /Subtype /Link /A << /S /GoTo /D (name#1) >> >>}% + /Type /Annot /Subtype /Link /A << /S /GoTo /D (#1) >> >>}% \setcolor{\linkcolor}#1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} % @@ -1725,7 +1811,7 @@ output) for that.)} \def\xeteximagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% \def\xeteximageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% % - % XeTeX (and the PDF format) support .pdf, .png, .jpg (among + % XeTeX (and the PDF format) supports .pdf, .png, .jpg (among % others). Let's try in that order, PDF first since if % someone has a scalable image, presumably better to use that than a % bitmap. @@ -1769,40 +1855,9 @@ output) for that.)} } \fi -\message{fonts,} - -% Change the current font style to #1, remembering it in \curfontstyle. -% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in -% italics, not bold italics. -% -\def\setfontstyle#1{% - \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. - \csname ten#1\endcsname % change the current font -} -% Select #1 fonts with the current style. % -\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} - -\def\rm{\fam=0 \setfontstyle{rm}} -\def\it{\fam=\itfam \setfontstyle{it}} -\def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} -\def\tt{\fam=\ttfam \setfontstyle{tt}} - -% Unfortunately, we have to override this for titles and the like, since -% in those cases "rm" is bold. Sigh. -\def\rmisbold{\rm\def\curfontstyle{bf}} - -% Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf. -\newfam\sffam -\def\sf{\fam=\sffam \setfontstyle{sf}} -\let\li = \sf % Sometimes we call it \li, not \sf. - -% We don't need math for this font style. -\def\ttsl{\setfontstyle{ttsl}} - +\message{fonts,} % Set the baselineskip to #1, and the lineskip and strut size % correspondingly. There is no deep meaning behind these magic numbers @@ -2153,8 +2208,8 @@ end \setfont\deftt\ttshape{10}{\magstep1}{OT1TT} \setfont\defsl\slshape{10}{\magstep1}{OT1TT} \setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf -\let\tenttsl=\defttsl \let\tensl=\defsl \bf} +\def\df{\let\ttfont=\deftt \let\bffont = \defbf +\let\ttfontsl=\defttsl \let\slfont=\defsl \bf} % Fonts for indices, footnotes, small examples (9pt). \def\smallnominalsize{9pt} @@ -2287,8 +2342,8 @@ end \setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} \setfont\defsl\slshape{10}{\magstephalf}{OT1TT} \setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf -\let\tensl=\defsl \let\tenttsl=\defttsl \bf} +\def\df{\let\ttfont=\deftt \let\bffont = \defbf +\let\slfont=\defsl \let\ttfontsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). \def\smallnominalsize{9pt} @@ -2394,6 +2449,12 @@ end \rm } % end of 10pt text font size definitions, \definetextfontsizex +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + % We provide the user-level command % @fonttextsize 10 @@ -2420,20 +2481,55 @@ end \endgroup } +% +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname #1font\endcsname % change the current font +} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. +\newfam\sffam +\def\sf{\fam=\sffam \setfontstyle{sf}} + +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} + + % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. We don't % bother to reset \scriptfont and \scriptscriptfont; awaiting user need. % \def\resetmathfonts{% - \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy - \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf - \textfont\ttfam=\tentt \textfont\sffam=\tensf + \textfont0=\rmfont \textfont1=\ifont \textfont2=\syfont + \textfont\itfam=\itfont \textfont\slfam=\slfont \textfont\bffam=\bffont + \textfont\ttfam=\ttfont \textfont\sffam=\sffont } -% The font-changing commands redefine the meanings of \tenSTYLE, instead +% Select #1 fonts with the current style. Used to change font size +% in, e.g., the LaTeX logo and acronyms. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +% The font-changing commands (all called \...fonts) redefine the meanings of +% \STYLEfont, instead % of just \STYLE. We do this because \STYLE needs to also set the % current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire -% \tenSTYLE to set the current font. +% \STYLEfont to set the current font. % % Each font-changing command also sets the names \lsize (one size lower) % and \lllsize (three sizes lower). These relative commands are used @@ -2442,78 +2538,72 @@ end % This all needs generalizing, badly. % \def\textfonts{% - \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl - \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy - \let\tenttsl=\textttsl + \let\rmfont=\textrm \let\itfont=\textit \let\slfont=\textsl + \let\bffont=\textbf \let\ttfont=\texttt \let\smallcaps=\textsc + \let\sffont=\textsf \let\ifont=\texti \let\syfont=\textsy + \let\ttfontsl=\textttsl \def\curfontsize{text}% \def\lsize{reduced}\def\lllsize{smaller}% \resetmathfonts \setleading{\textleading}} \def\titlefonts{% - \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl - \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc - \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy - \let\tenttsl=\titlettsl + \let\rmfont=\titlerm \let\itfont=\titleit \let\slfont=\titlesl + \let\bffont=\titlebf \let\ttfont=\titlett \let\smallcaps=\titlesc + \let\sffont=\titlesf \let\ifont=\titlei \let\syfont=\titlesy + \let\ttfontsl=\titlettsl \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{27pt}} \def\titlefont#1{{\titlefonts\rmisbold #1}} \def\chapfonts{% - \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl - \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy - \let\tenttsl=\chapttsl + \let\rmfont=\chaprm \let\itfont=\chapit \let\slfont=\chapsl + \let\bffont=\chapbf \let\ttfont=\chaptt \let\smallcaps=\chapsc + \let\sffont=\chapsf \let\ifont=\chapi \let\syfont=\chapsy + \let\ttfontsl=\chapttsl \def\curfontsize{chap}% \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% - \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl - \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy - \let\tenttsl=\secttsl + \let\rmfont=\secrm \let\itfont=\secit \let\slfont=\secsl + \let\bffont=\secbf \let\ttfont=\sectt \let\smallcaps=\secsc + \let\sffont=\secsf \let\ifont=\seci \let\syfont=\secsy + \let\ttfontsl=\secttsl \def\curfontsize{sec}% \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{17pt}} \def\subsecfonts{% - \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl - \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy - \let\tenttsl=\ssecttsl + \let\rmfont=\ssecrm \let\itfont=\ssecit \let\slfont=\ssecsl + \let\bffont=\ssecbf \let\ttfont=\ssectt \let\smallcaps=\ssecsc + \let\sffont=\ssecsf \let\ifont=\sseci \let\syfont=\ssecsy + \let\ttfontsl=\ssecttsl \def\curfontsize{ssec}% \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts \def\reducedfonts{% - \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl - \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc - \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy - \let\tenttsl=\reducedttsl + \let\rmfont=\reducedrm \let\itfont=\reducedit \let\slfont=\reducedsl + \let\bffont=\reducedbf \let\ttfont=\reducedtt \let\reducedcaps=\reducedsc + \let\sffont=\reducedsf \let\ifont=\reducedi \let\syfont=\reducedsy + \let\ttfontsl=\reducedttsl \def\curfontsize{reduced}% \def\lsize{small}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallfonts{% - \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl - \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc - \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy - \let\tenttsl=\smallttsl + \let\rmfont=\smallrm \let\itfont=\smallit \let\slfont=\smallsl + \let\bffont=\smallbf \let\ttfont=\smalltt \let\smallcaps=\smallsc + \let\sffont=\smallsf \let\ifont=\smalli \let\syfont=\smallsy + \let\ttfontsl=\smallttsl \def\curfontsize{small}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% - \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl - \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc - \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy - \let\tenttsl=\smallerttsl + \let\rmfont=\smallerrm \let\itfont=\smallerit \let\slfont=\smallersl + \let\bffont=\smallerbf \let\ttfont=\smallertt \let\smallcaps=\smallersc + \let\sffont=\smallersf \let\ifont=\smalleri \let\syfont=\smallersy + \let\ttfontsl=\smallerttsl \def\curfontsize{smaller}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} -% Fonts for short table of contents. -\setfont\shortcontrm\rmshape{12}{1000}{OT1} -\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 -\setfont\shortcontsl\slshape{12}{1000}{OT1} -\setfont\shortconttt\ttshape{12}{1000}{OT1TT} - % Define these just so they can be easily changed for other fonts. \def\angleleft{$\langle$} \def\angleright{$\rangle$} @@ -3297,23 +3387,10 @@ end \let\atchar=\@ % @{ @} @lbracechar{} @rbracechar{} all generate brace characters. -% Unless we're in typewriter, use \ecfont because the CM text fonts do -% not have braces, and we don't want to switch into math. -\def\mylbrace{{\ifmonospace\char123\else\ensuremath\lbrace\fi}} -\def\myrbrace{{\ifmonospace\char125\else\ensuremath\rbrace\fi}} -\let\{=\mylbrace \let\lbracechar=\{ -\let\}=\myrbrace \let\rbracechar=\} -\begingroup - % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux/toc files. - \catcode`\{ = \other \catcode`\} = \other - \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\! = 0 \catcode`\\ = \other - !gdef!lbracecmd[\{]% - !gdef!rbracecmd[\}]% - !gdef!lbraceatcmd[@{]% - !gdef!rbraceatcmd[@}]% -!endgroup +\def\lbracechar{{\ifmonospace\char123\else\ensuremath\lbrace\fi}} +\def\rbracechar{{\ifmonospace\char125\else\ensuremath\rbrace\fi}} +\let\{=\lbracechar +\let\}=\rbracechar % @comma{} to avoid , parsing problems. \let\comma = , @@ -3432,7 +3509,7 @@ end % \newbox\errorbox % -{\tentt \global\dimen0 = 3em}% Width of the box. +{\ttfont \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt} @@ -3691,7 +3768,7 @@ end % Macros to be used within @titlepage: -\let\subtitlerm=\tenrm +\let\subtitlerm=\rmfont \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} \parseargdef\title{% @@ -3896,7 +3973,7 @@ end \message{tables,} -% Tables -- @table, @ftable, @ktable, @vtable, @item(x). +% Tables -- @table, @ftable, @vtable, @item(x). % default indentation of table text \newdimen\tableindent \tableindent=.8in @@ -3908,7 +3985,7 @@ end % used internally for \itemindent minus \itemmargin \newdimen\itemmax -% Note @table, @ftable, @ktable and @vtable define @item, @itemx, etc., with +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with % these defs. % They also define \itemindex % to index the item name in whatever manner is desired (perhaps none). @@ -3976,7 +4053,7 @@ end \def\item{\errmessage{@item while not in a list environment}} \def\itemx{\errmessage{@itemx while not in a list environment}} -% @table, @ftable, @ktable, @vtable. +% @table, @ftable, @vtable. \envdef\table{% \let\itemindex\gobble \tablecheck{table}% @@ -3985,10 +4062,6 @@ end \def\itemindex ##1{\doind {fn}{\code{##1}}}% \tablecheck{ftable}% } -\envdef\ktable{% - \def\itemindex ##1{\doind {ky}{\code{##1}}}% - \tablecheck{ktable}% -} \envdef\vtable{% \def\itemindex ##1{\doind {vr}{\code{##1}}}% \tablecheck{vtable}% @@ -4032,7 +4105,6 @@ end } \def\Etable{\endgraf\afterenvbreak} \let\Eftable\Etable -\let\Ektable\Etable \let\Evtable\Etable \let\Eitemize\Etable \let\Eenumerate\Etable @@ -4786,14 +4858,7 @@ end % #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), % #3 the target index (bar). \def\dosynindex#1#2#3{% - % Only do \closeout if we haven't already done it, else we'll end up - % closing the target index. - \expandafter \ifx\csname donesynindex#2\endcsname \relax - % The \closeout helps reduce unnecessary open files; the limit on the - % Acorn RISC OS is a mere 16 files. - \expandafter\closeout\csname#2indfile\endcsname - \expandafter\let\csname donesynindex#2\endcsname = 1 - \fi + \requireopenindexfile{#3}% % redefine \fooindfile: \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname \expandafter\let\csname#2indfile\endcsname=\temp @@ -4818,17 +4883,12 @@ end % \def\indexdummies{% \escapechar = `\\ % use backslash in output files. - \def\@{@}% change to @@ when we switch to @ as escape char in index files. - \def\ {\realbackslash\space }% - % - % Need these unexpandable (because we define \tt as a dummy) - % definitions when @{ or @} appear in index entry text. Also, more - % complicated, when \tex is in effect and \{ is a \delimiter again. - % We can't use \lbracecmd and \rbracecmd because texindex assumes - % braces and backslashes are used only as delimiters. Perhaps we - % should use @lbracechar and @rbracechar? - \def\{{{\tt\char123}}% - \def\}{{\tt\char125}}% + \definedummyletter\@% + \definedummyletter\ % + % + % For texindex which always views { and } as separators. + \def\{{\lbracechar{}}% + \def\}{\rbracechar{}}% % % Do the redefinitions. \definedummies @@ -4836,16 +4896,11 @@ end % Used for the aux and toc files, where @ is the escape character. % -% For the aux and toc files, @ is the escape character. So we want to -% redefine everything using @ as the escape character (instead of -% \realbackslash, still used for index files). When everything uses @, -% this will be simpler. -% \def\atdummies{% - \def\@{@@}% - \def\ {@ }% - \let\{ = \lbraceatcmd - \let\} = \rbraceatcmd + \definedummyletter\@% + \definedummyletter\ % + \definedummyletter\{% + \definedummyletter\}% % % Do the redefinitions. \definedummies @@ -4917,6 +4972,7 @@ end \definedummyword\TeX % % Assorted special characters. + \definedummyword\atchar \definedummyword\arrow \definedummyword\bullet \definedummyword\comma @@ -5133,37 +5189,40 @@ end \def\LaTeX{LaTeX}% \def\TeX{TeX}% % - % Assorted special characters. - % (The following {} will end up in the sort string, but that's ok.) - \def\arrow{->}% - \def\bullet{bullet}% - \def\comma{,}% - \def\copyright{copyright}% - \def\dots{...}% - \def\enddots{...}% - \def\equiv{==}% - \def\error{error}% - \def\euro{euro}% - \def\expansion{==>}% - \def\geq{>=}% - \def\guillemetleft{<<}% - \def\guillemetright{>>}% - \def\guilsinglleft{<}% - \def\guilsinglright{>}% - \def\leq{<=}% - \def\minus{-}% - \def\point{.}% - \def\pounds{pounds}% - \def\print{-|}% - \def\quotedblbase{"}% - \def\quotedblleft{"}% - \def\quotedblright{"}% - \def\quoteleft{`}% - \def\quoteright{'}% - \def\quotesinglbase{,}% - \def\registeredsymbol{R}% - \def\result{=>}% - \def\textdegree{o}% + % Assorted special characters. \defglyph gives the control sequence a + % definition that removes the {} that follows its use. + \defglyph\atchar{@}% + \defglyph\arrow{->}% + \defglyph\bullet{bullet}% + \defglyph\comma{,}% + \defglyph\copyright{copyright}% + \defglyph\dots{...}% + \defglyph\enddots{...}% + \defglyph\equiv{==}% + \defglyph\error{error}% + \defglyph\euro{euro}% + \defglyph\expansion{==>}% + \defglyph\geq{>=}% + \defglyph\guillemetleft{<<}% + \defglyph\guillemetright{>>}% + \defglyph\guilsinglleft{<}% + \defglyph\guilsinglright{>}% + \defglyph\leq{<=}% + \defglyph\lbracechar{\{}% + \defglyph\minus{-}% + \defglyph\point{.}% + \defglyph\pounds{pounds}% + \defglyph\print{-|}% + \defglyph\quotedblbase{"}% + \defglyph\quotedblleft{"}% + \defglyph\quotedblright{"}% + \defglyph\quoteleft{`}% + \defglyph\quoteright{'}% + \defglyph\quotesinglbase{,}% + \defglyph\rbracechar{\}}% + \defglyph\registeredsymbol{R}% + \defglyph\result{=>}% + \defglyph\textdegree{o}% % % We need to get rid of all macros, leaving only the arguments (if present). % Of course this is not nearly correct, but it is the best we can do for now. @@ -5178,6 +5237,7 @@ end \macrolist \let\value\indexnofontsvalue } +\def\defglyph#1#2{\def#1##1{#2}} % see above @@ -5427,7 +5487,7 @@ end % \initial {@} % as its first line, TeX doesn't complain about mismatched braces % (because it thinks @} is a control sequence). - \catcode`\@ = 11 + \catcode`\@ = 12 % See comment in \requireopenindexfile. \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi \openin 1 \jobname.\indexname s @@ -5455,7 +5515,7 @@ end \let\indexlbrace\{ % Likewise, set these sequences for braces \let\indexrbrace\} % used in the sort key. \begindoublecolumns - \let\entryorphanpenalty=\indexorphanpenalty + \let\entrywidowpenalty=\indexwidowpenalty % % Read input from the index file line by line. \loopdo @@ -5555,6 +5615,12 @@ end % \def\entry{% \begingroup + % + % For pdfTeX and XeTeX. + % The redefinition of \domark stops marks being added in \pdflink to + % preserve coloured links across page boundaries. Otherwise the marks + % would get in the way of \lastbox in \insertindexentrybox. + \let\domark\relax % % Start a new paragraph if necessary, so our assignments below can't % affect previous text. @@ -5569,10 +5635,6 @@ end \def\*{\unskip\space\ignorespaces}% \def\entrybreak{\hfil\break}% An undocumented command % - % A bit of stretch before each entry for the benefit of balancing - % columns. - \vskip 0pt plus0.5pt - % % Swallow the left brace of the text (first parameter): \afterassignment\doentry \let\temp = @@ -5606,20 +5668,13 @@ end % \ifpdf \pdfgettoks#1.% - \bgroup\let\domark\relax - \hskip\skip\thinshrinkable\the\toksA - \egroup - % The redefinion of \domark stops marks being added in \pdflink to - % preserve coloured links across page boundaries. Otherwise the marks - % would get in the way of \lastbox in \insertindexentrybox. + \hskip\skip\thinshrinkable\the\toksA \else \ifx\XeTeXrevision\thisisundefined \hskip\skip\thinshrinkable #1% \else \pdfgettoks#1.% - \bgroup\let\domark\relax - \hskip\skip\thinshrinkable\the\toksA - \egroup + \hskip\skip\thinshrinkable\the\toksA \fi \fi \fi @@ -5628,11 +5683,10 @@ end \global\setbox\entryindexbox=\vbox{\unhbox\boxA}% \else \global\setbox\entryindexbox=\vbox\bgroup - \prevdepth=\entrylinedepth - \noindent % We want the text of the entries to be aligned to the left, and the % page numbers to be aligned to the right. % + \parindent = 0pt \advance\leftskip by 0pt plus 1fil \advance\leftskip by 0pt plus -1fill \rightskip = 0pt plus -1fil @@ -5641,8 +5695,6 @@ end % if the list of page numbers is long, to be aligned to the right. \parfillskip=0pt plus -1fill % - \hangindent=1em - % \advance\rightskip by \entryrightmargin % Determine how far we can stretch into the margin. % This allows, e.g., "Appendix H GNU Free Documentation License" to @@ -5662,17 +5714,21 @@ end \ifdim\dimen@ > 0.8\dimen@ii % due to long index text \dimen@ = 0.7\dimen@ % Try to split the text roughly evenly \dimen@ii = \hsize - \advance \dimen@ii by -1em \ifnum\dimen@>\dimen@ii % If the entry is too long, use the whole line \dimen@ = \dimen@ii \fi \advance\leftskip by 0pt plus 1fill % ragged right \advance \dimen@ by 1\rightskip - \parshape = 2 0pt \dimen@ 1em \dimen@ii - % Ideally we'd add a finite glue at the end of the first line only, but - % TeX doesn't seem to provide a way to do such a thing. + \parshape = 2 0pt \dimen@ 0em \dimen@ii + % Ideally we'd add a finite glue at the end of the first line only, + % instead of using \parshape with explicit line lengths, but TeX + % doesn't seem to provide a way to do such a thing. + % + \leftskip = 1em + \parindent = -1em \fi\fi + \indent % start paragraph \unhbox\boxA % % Do not prefer a separate line ending with a hyphen to fewer lines. @@ -5690,7 +5746,7 @@ end \endgroup % delay text of entry until after penalty \bgroup\aftergroup\insertindexentrybox - \entryorphanpenalty + \entrywidowpenalty }} \newskip\thinshrinkable @@ -5698,40 +5754,43 @@ end \newbox\entryindexbox \def\insertindexentrybox{% - \copy\entryindexbox - % The following gets the depth of the last box. This is for even - % line spacing when entries span several lines. - \setbox\dummybox\vbox{% - \unvbox\entryindexbox - \nointerlineskip - \lastbox - \global\entrylinedepth=\prevdepth + \ourunvbox\entryindexbox +} + +% Use \lastbox to take apart vbox box by box, and add each sub-box +% to the current vertical list. +\def\ourunvbox#1{% +\bgroup % for local binding of \delayedbox + % Remove the last box from box #1 + \global\setbox#1=\vbox{% + \unvbox#1% + \unskip % remove any glue + \unpenalty + \global\setbox\interbox=\lastbox }% - % Note that we couldn't simply \unvbox\entryindexbox followed by - % \nointerlineskip\lastbox to remove the last box and then reinstate it, - % because this resets how far the box has been \moveleft'ed to 0. \unvbox - % doesn't affect \prevdepth either. + \setbox\delayedbox=\box\interbox + \ifdim\ht#1=0pt\else + \ourunvbox#1 % Repeat on what's left of the box + \nobreak + \fi + \box\delayedbox +\egroup } -\newdimen\entrylinedepth +\newbox\delayedbox +\newbox\interbox % Default is no penalty -\let\entryorphanpenalty\egroup +\let\entrywidowpenalty\egroup % Used from \printindex. \firsttoken should be the first token % after the \entry. If it's not another \entry, we are at the last % line of a group of index entries, so insert a penalty to discourage -% orphaned index entries. -\long\def\indexorphanpenalty{% +% widowed index entries. +\long\def\indexwidowpenalty{% \def\isentry{\entry}% \ifx\firsttoken\isentry \else - \unskip\penalty 9000 - % The \unskip here stops breaking before the glue. It relies on the - % \vskip above being there, otherwise there is an error - % "You can't use `\unskip' in vertical mode". There has to be glue - % in the current vertical list that hasn't been added to the - % "current page". See Chapter 24 of the TeXbook. This contradicts - % Section 8.3.7 in "TeX by Topic," though. + \penalty 9000 \fi \egroup % now comes the box added with \aftergroup } @@ -5771,8 +5830,6 @@ end \newbox\partialpage \newdimen\doublecolumnhsize -\newdimen\doublecolumntopgap -\doublecolumntopgap = 0pt % Use inside an output routine to save \topmark and \firstmark \def\savemarks{% @@ -5855,12 +5912,10 @@ end % % Double the \vsize as well. (We don't need a separate register here, % since nobody clobbers \vsize.) - \global\doublecolumntopgap = \topskip - \global\advance\doublecolumntopgap by -1\baselineskip - \advance\vsize by -1\doublecolumntopgap \vsize = 2\vsize - \topskip=0pt - \global\entrylinedepth=0pt\relax + % + % For the benefit of balancing columns + \advance\baselineskip by 0pt plus 0.5pt } % The double-column output routine for all double-column pages except @@ -5890,9 +5945,7 @@ end % \hsize = \doublecolumnhsize \wd0=\hsize \wd2=\hsize - \vbox{% - \vskip\doublecolumntopgap - \hbox to\txipagewidth{\box0\hfil\box2}}% + \hbox to\txipagewidth{\box0\hfil\box2}% } @@ -5959,51 +6012,44 @@ end \dimen@ = \ht0 \advance\dimen@ by \topskip \advance\dimen@ by-\baselineskip - \ifdim\dimen@<14\baselineskip + \ifdim\dimen@<5\baselineskip % Don't split a short final column in two. \setbox2=\vbox{}% \else \divide\dimen@ by 2 % target to split to \dimen@ii = \dimen@ \splittopskip = \topskip - % Loop until the second column is no higher than the first + % Loop until left column is at least as high as the right column. {% \vbadness = 10000 \loop \global\setbox3 = \copy0 \global\setbox1 = \vsplit3 to \dimen@ - % Remove glue from bottom of first column to - % make sure it is higher than the second. - \global\setbox1 = \vbox{\unvbox1\unpenalty\unskip}% - \ifdim\ht3>\ht1 + \ifdim\ht1<\ht3 \global\advance\dimen@ by 1pt \repeat }% + % Now the left column is in box 1, and the right column in box 3. + % Check whether the left column has come out higher than the page itself. + % (Note that we have doubled \vsize for the double columns, so + % the actual height of the page is 0.5\vsize). \ifdim2\ht1>\vsize - % The left column has come out longer than the page itself. (Note - % that we have doubled \vsize for the double columns, so - % the actual height of the page is 0.5\vsize). Just split the last - % of the double column material roughly in half. + % Just split the last of the double column material roughly in half. \setbox2=\box0 \setbox0 = \vsplit2 to \dimen@ii - \setbox0=\vbox to\dimen@ii{\unvbox0}% - \setbox2=\vbox to\dimen@ii{\unvbox2}% + \setbox0=\vbox to \dimen@ii {\unvbox0\vfill}% + \setbox2=\vbox to \dimen@ii {\unvbox2\vfill}% \else - \multiply\dimen@ii by 5 - \divide\dimen@ii by 4 - \global\setbox3 = \copy0 - \global\setbox1 = \vsplit3 to \dimen@ii - \global\setbox\balancedcolumns=\vbox{\pagesofar}% - \ifdim\ht3<\dimen@ii + % Compare the heights of the two columns. + \ifdim4\ht1>5\ht3 % Column heights are too different, so don't make their bottoms - % flush with each other. The glue at the end of the second column - % allows a second column to stretch, reducing the difference in - % height between the two. - \setbox0=\vbox to\dimen@{\unvbox1\vfill}% - \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}% + % flush with each other. + \setbox2=\vbox to \ht1 {\unvbox3\vfill}% + \setbox0=\vbox to \ht1 {\unvbox1\vfill}% \else - \setbox0=\vbox to\dimen@{\unvbox1}% - \setbox2=\vbox to\dimen@{\unvbox3}% + % Make column bottoms flush with each other. + \setbox2=\vbox to\ht1{\unvbox3\unskip}% + \setbox0=\vbox to\ht1{\unvbox1\unskip}% \fi \fi \fi @@ -7874,7 +7920,7 @@ end \fi % no return type #3% output function name }% - {\rm\enskip}% hskip 0.5 em of \tenrm + {\rm\enskip}% hskip 0.5 em of \rmfont % \boldbrax % arguments will be output next, if any. @@ -8838,8 +8884,8 @@ end \ifpdf % For pdfTeX and LuaTeX {\indexnofonts - \turnoffactive \makevalueexpandable + \turnoffactive % This expands tokens, so do it after making catcode changes, so _ % etc. don't get their TeX definitions. This ignores all spaces in % #4, including (wrongly) those in the middle of the filename. @@ -8847,19 +8893,18 @@ end % % This (wrongly) does not take account of leading or trailing % spaces in #1, which should be ignored. - \edef\pdfxrefdest{#1}% - \ifx\pdfxrefdest\empty - \def\pdfxrefdest{Top}% no empty targets - \else - \txiescapepdf\pdfxrefdest % escape PDF special chars + \setpdfdestname{#1}% + % + \ifx\pdfdestname\empty + \def\pdfdestname{Top}% no empty targets \fi % \leavevmode \startlink attr{/Border [0 0 0]}% \ifnum\filenamelength>0 - goto file{\the\filename.pdf} name{\pdfxrefdest}% + goto file{\the\filename.pdf} name{\pdfdestname}% \else - goto name{\pdfmkpgn{\pdfxrefdest}}% + goto name{\pdfmkpgn{\pdfdestname}}% \fi }% \setcolor{\linkcolor}% @@ -8868,8 +8913,8 @@ end \else % For XeTeX {\indexnofonts - \turnoffactive \makevalueexpandable + \turnoffactive % This expands tokens, so do it after making catcode changes, so _ % etc. don't get their TeX definitions. This ignores all spaces in % #4, including (wrongly) those in the middle of the filename. @@ -8877,32 +8922,27 @@ end % % This (wrongly) does not take account of leading or trailing % spaces in #1, which should be ignored. - \iftxiuseunicodedestname - \def\pdfxrefdest{#1}% Pass through Unicode characters. - \else - \edef\pdfxrefdest{#1}% Replace Unicode characters to ASCII. - \fi - \ifx\pdfxrefdest\empty - \def\pdfxrefdest{Top}% no empty targets - \else - \txiescapepdf\pdfxrefdest % escape PDF special chars + \setpdfdestname{#1}% + % + \ifx\pdfdestname\empty + \def\pdfdestname{Top}% no empty targets \fi % \leavevmode \ifnum\filenamelength>0 - % By the default settings, + % With default settings, % XeTeX (xdvipdfmx) replaces link destination names with integers. % In this case, the replaced destination names of - % remote PDF cannot be known. In order to avoid replacement, - % you can use commandline option `-C 0x0010' for xdvipdfmx. + % remote PDFs are no longer known. In order to avoid a replacement, + % you can use xdvipdfmx's command line option `-C 0x0010'. % If you use XeTeX 0.99996+ (TeX Live 2016+), - % the commandline option is not neccesary - % because we can use `dvipdfmx:config' special. + % this command line option is no longer necessary + % because we can use the `dvipdfmx:config' special. \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A - << /S /GoToR /F (\the\filename.pdf) /D (name\pdfxrefdest) >> >>}% + << /S /GoToR /F (\the\filename.pdf) /D (\pdfdestname) >> >>}% \else \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A - << /S /GoTo /D (name\pdfxrefdest) >> >>}% + << /S /GoTo /D (\pdfdestname) >> >>}% \fi }% \setcolor{\linkcolor}% @@ -9809,9 +9849,9 @@ directory should work if nowhere else does.} \global\righthyphenmin = #3\relax } -% XeTeX and LuaTeX can handle native Unicode. -% Their default I/O is UTF-8 sequence instead of byte-wise. -% Other TeX engine (pdfTeX etc.) I/O is byte-wise. +% XeTeX and LuaTeX can handle Unicode natively. +% Their default I/O uses UTF-8 sequences instead of a byte-wise operation. +% Other TeX engines' I/O (pdfTeX, etc.) is byte-wise. % \newif\iftxinativeunicodecapable \newif\iftxiusebytewiseio @@ -9935,14 +9975,15 @@ directory should work if nowhere else does.} % \else \ifx \declaredencoding \utfeight \iftxinativeunicodecapable - % For native Unicode (XeTeX and LuaTeX) + % For native Unicode handling (XeTeX and LuaTeX) \nativeunicodechardefs \else - % For UTF-8 byte sequence (TeX, eTeX and pdfTeX) + % For treating UTF-8 as byte sequences (TeX, eTeX and pdfTeX) \setnonasciicharscatcode\active % since we already invoked \utfeightchardefs at the top level - % (below), do not re-invoke it, then our check for duplicated - % definitions triggers. Making non-ascii chars active is enough. + % (below), do not re-invoke it, otherwise our check for duplicated + % definitions gets triggered. Making non-ascii chars active is + % sufficient. \fi % \else @@ -9953,6 +9994,18 @@ directory should work if nowhere else does.} \fi % latone \fi % lattwo \fi % ascii + % + \ifx\XeTeXrevision\thisisundefined + \else + \ifx \declaredencoding \utfeight + \else + \ifx \declaredencoding \ascii + \else + \message{Warning: XeTeX with non-UTF-8 encodings cannot handle % + non-ASCII characters in auxiliary files.}% + \fi + \fi + \fi } % emacs-page @@ -9984,18 +10037,18 @@ directory should work if nowhere else does.} \gdefchar^^a0{\tie} \gdefchar^^a1{\exclamdown} \gdefchar^^a2{{\tcfont \char162}} % cent - \gdefchar^^a3{\pounds} + \gdefchar^^a3{\pounds{}} \gdefchar^^a4{{\tcfont \char164}} % currency \gdefchar^^a5{{\tcfont \char165}} % yen \gdefchar^^a6{{\tcfont \char166}} % broken bar \gdefchar^^a7{\S} \gdefchar^^a8{\"{}} - \gdefchar^^a9{\copyright} + \gdefchar^^a9{\copyright{}} \gdefchar^^aa{\ordf} - \gdefchar^^ab{\guillemetleft} + \gdefchar^^ab{\guillemetleft{}} \gdefchar^^ac{\ensuremath\lnot} \gdefchar^^ad{\-} - \gdefchar^^ae{\registeredsymbol} + \gdefchar^^ae{\registeredsymbol{}} \gdefchar^^af{\={}} % \gdefchar^^b0{\textdegree} @@ -10009,7 +10062,7 @@ directory should work if nowhere else does.} \gdefchar^^b8{\cedilla\ } \gdefchar^^b9{$^1$} \gdefchar^^ba{\ordm} - \gdefchar^^bb{\guillemetright} + \gdefchar^^bb{\guillemetright{}} \gdefchar^^bc{$1\over4$} \gdefchar^^bd{$1\over2$} \gdefchar^^be{$3\over4$} @@ -10089,7 +10142,7 @@ directory should work if nowhere else does.} % Encoding is almost identical to Latin1. \latonechardefs % - \gdefchar^^a4{\euro} + \gdefchar^^a4{\euro{}} \gdefchar^^a6{\v S} \gdefchar^^a8{\v s} \gdefchar^^b4{\v Z} @@ -10118,7 +10171,7 @@ directory should work if nowhere else does.} \gdefchar^^ae{\v Z} \gdefchar^^af{\dotaccent Z} % - \gdefchar^^b0{\textdegree} + \gdefchar^^b0{\textdegree{}} \gdefchar^^b1{\ogonek{a}} \gdefchar^^b2{\ogonek{ }} \gdefchar^^b3{\l} @@ -10290,8 +10343,9 @@ directory should work if nowhere else does.} \def\U#1{% \expandafter\ifx\csname uni:#1\endcsname \relax \iftxinativeunicodecapable - % Any Unicode characters can be used by native Unicode. - % However, if the font does not have the glyph, the letter will miss. + % All Unicode characters can be used if native Unicode handling is + % active. However, if the font does not have the glyph, + % letters are missing. \begingroup \uccode`\.="#1\relax \uppercase{.} @@ -10314,9 +10368,9 @@ directory should work if nowhere else does.} \def\UTFviiiFourOctetsName#1#2#3#4{% \csname u8:#1\string #2\string #3\string #4\endcsname}% -% For UTF-8 byte sequence (TeX, e-TeX and pdfTeX) -% Definition macro to replace the Unicode character -% Definition macro that is used by @U command +% For UTF-8 byte sequences (TeX, e-TeX and pdfTeX), +% provide a definition macro to replace a Unicode character; +% this gets used by the @U command % \begingroup \catcode`\"=12 @@ -10404,8 +10458,8 @@ directory should work if nowhere else does.} \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} \endgroup -% For native Unicode (XeTeX and LuaTeX) -% Definition macro that is set catcode other non global +% For native Unicode handling (XeTeX and LuaTeX), +% provide a definition macro that sets a catcode to `other' non-globally % \def\DeclareUnicodeCharacterNativeOther#1#2{% \catcode"#1=\other @@ -10429,18 +10483,18 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{00A0}{\tie}% \DeclareUnicodeCharacter{00A1}{\exclamdown}% \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent - \DeclareUnicodeCharacter{00A3}{\pounds}% + \DeclareUnicodeCharacter{00A3}{\pounds{}}% \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar \DeclareUnicodeCharacter{00A7}{\S}% \DeclareUnicodeCharacter{00A8}{\"{ }}% - \DeclareUnicodeCharacter{00A9}{\copyright}% + \DeclareUnicodeCharacter{00A9}{\copyright{}}% \DeclareUnicodeCharacter{00AA}{\ordf}% - \DeclareUnicodeCharacter{00AB}{\guillemetleft}% + \DeclareUnicodeCharacter{00AB}{\guillemetleft{}}% \DeclareUnicodeCharacter{00AC}{\ensuremath\lnot}% \DeclareUnicodeCharacter{00AD}{\-}% - \DeclareUnicodeCharacter{00AE}{\registeredsymbol}% + \DeclareUnicodeCharacter{00AE}{\registeredsymbol{}}% \DeclareUnicodeCharacter{00AF}{\={ }}% % \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}% @@ -10454,7 +10508,7 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{00B8}{\cedilla{ }}% \DeclareUnicodeCharacter{00B9}{$^1$}% \DeclareUnicodeCharacter{00BA}{\ordm}% - \DeclareUnicodeCharacter{00BB}{\guillemetright}% + \DeclareUnicodeCharacter{00BB}{\guillemetright{}}% \DeclareUnicodeCharacter{00BC}{$1\over4$}% \DeclareUnicodeCharacter{00BD}{$1\over2$}% \DeclareUnicodeCharacter{00BE}{$3\over4$}% @@ -10926,36 +10980,36 @@ directory should work if nowhere else does.} % Punctuation \DeclareUnicodeCharacter{2013}{--}% \DeclareUnicodeCharacter{2014}{---}% - \DeclareUnicodeCharacter{2018}{\quoteleft}% - \DeclareUnicodeCharacter{2019}{\quoteright}% - \DeclareUnicodeCharacter{201A}{\quotesinglbase}% - \DeclareUnicodeCharacter{201C}{\quotedblleft}% - \DeclareUnicodeCharacter{201D}{\quotedblright}% - \DeclareUnicodeCharacter{201E}{\quotedblbase}% + \DeclareUnicodeCharacter{2018}{\quoteleft{}}% + \DeclareUnicodeCharacter{2019}{\quoteright{}}% + \DeclareUnicodeCharacter{201A}{\quotesinglbase{}}% + \DeclareUnicodeCharacter{201C}{\quotedblleft{}}% + \DeclareUnicodeCharacter{201D}{\quotedblright{}}% + \DeclareUnicodeCharacter{201E}{\quotedblbase{}}% \DeclareUnicodeCharacter{2020}{\ensuremath\dagger}% \DeclareUnicodeCharacter{2021}{\ensuremath\ddagger}% - \DeclareUnicodeCharacter{2022}{\bullet}% + \DeclareUnicodeCharacter{2022}{\bullet{}}% \DeclareUnicodeCharacter{202F}{\thinspace}% - \DeclareUnicodeCharacter{2026}{\dots}% - \DeclareUnicodeCharacter{2039}{\guilsinglleft}% - \DeclareUnicodeCharacter{203A}{\guilsinglright}% + \DeclareUnicodeCharacter{2026}{\dots{}}% + \DeclareUnicodeCharacter{2039}{\guilsinglleft{}}% + \DeclareUnicodeCharacter{203A}{\guilsinglright{}}% % - \DeclareUnicodeCharacter{20AC}{\euro}% + \DeclareUnicodeCharacter{20AC}{\euro{}}% % - \DeclareUnicodeCharacter{2192}{\expansion}% - \DeclareUnicodeCharacter{21D2}{\result}% + \DeclareUnicodeCharacter{2192}{\expansion{}}% + \DeclareUnicodeCharacter{21D2}{\result{}}% % % Mathematical symbols \DeclareUnicodeCharacter{2200}{\ensuremath\forall}% \DeclareUnicodeCharacter{2203}{\ensuremath\exists}% \DeclareUnicodeCharacter{2208}{\ensuremath\in}% - \DeclareUnicodeCharacter{2212}{\minus}% + \DeclareUnicodeCharacter{2212}{\minus{}}% \DeclareUnicodeCharacter{2217}{\ast}% \DeclareUnicodeCharacter{221E}{\ensuremath\infty}% \DeclareUnicodeCharacter{2225}{\ensuremath\parallel}% \DeclareUnicodeCharacter{2227}{\ensuremath\wedge}% \DeclareUnicodeCharacter{2229}{\ensuremath\cap}% - \DeclareUnicodeCharacter{2261}{\equiv}% + \DeclareUnicodeCharacter{2261}{\equiv{}}% \DeclareUnicodeCharacter{2264}{\ensuremath\leq}% \DeclareUnicodeCharacter{2265}{\ensuremath\geq}% \DeclareUnicodeCharacter{2282}{\ensuremath\subset}% @@ -11111,8 +11165,8 @@ directory should work if nowhere else does.} \newif\ifpassthroughchars \passthroughcharsfalse -% For native Unicode (XeTeX and LuaTeX) -% Definition macro to replace / pass-through the Unicode character +% For native Unicode handling (XeTeX and LuaTeX), +% provide a definition macro to replace/pass-through a Unicode character % \def\DeclareUnicodeCharacterNative#1#2{% \catcode"#1=\active @@ -11135,21 +11189,22 @@ directory should work if nowhere else does.} \endgroup } -% Native Unicode (XeTeX and LuaTeX) character replacing definitions -% It makes the setting that replace the Unicode characters. +% Native Unicode handling (XeTeX and LuaTeX) character replacing definition. +% It activates the setting that replaces Unicode characters. \def\nativeunicodechardefs{% \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNative \unicodechardefs } -% For native Unicode (XeTeX and LuaTeX). Make the character token expand +% For native Unicode handling (XeTeX and LuaTeX), +% make the character token expand % to the sequences given in \unicodechardefs for printing. \def\DeclareUnicodeCharacterNativeAtU#1#2{% \def\UTFAtUTmp{#2} \expandafter\globallet\csname uni:#1\endcsname \UTFAtUTmp } -% Native Unicode (XeTeX and LuaTeX) @U command definitions +% @U command definitions for native Unicode handling (XeTeX and LuaTeX). \def\nativeunicodechardefsatu{% \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNativeAtU \unicodechardefs @@ -11160,7 +11215,7 @@ directory should work if nowhere else does.} \relax } -% define all the unicode characters we know about, for the sake of @U. +% define all Unicode characters we know about, for the sake of @U. \iftxinativeunicodecapable \nativeunicodechardefsatu \else @@ -11636,7 +11691,4 @@ directory should work if nowhere else does.} @c vim:sw=2: -@ignore - arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 -@end ignore @enablebackslashhack -- cgit v1.2.3