From 27f23eab2f54b0c4822261ef26a4b345e183c091 Mon Sep 17 00:00:00 2001 From: Ricardo Wurmus Date: Sat, 20 Feb 2021 08:41:44 +0100 Subject: Update build system files. --- aclocal.m4 | 42 +- build-aux/install-sh | 13 +- build-aux/mdate-sh | 2 +- build-aux/missing | 2 +- build-aux/texinfo.tex | 1189 ++++++++++++++++++++++--------------------------- 5 files changed, 573 insertions(+), 675 deletions(-) diff --git a/aclocal.m4 b/aclocal.m4 index 05dd515..65028ab 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.16.1 -*- Autoconf -*- +# generated automatically by aclocal 1.16.2 -*- Autoconf -*- -# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# Copyright (C) 1996-2020 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -34,8 +34,8 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.]) # for an available version of Guile. # # By default, this macro will search for the latest stable version of -# Guile (e.g. 2.2), falling back to the previous stable version -# (e.g. 2.0) if it is available. If no guile-@var{VERSION}.pc file is +# Guile (e.g. 3.0), falling back to the previous stable version +# (e.g. 2.2) if it is available. If no guile-@var{VERSION}.pc file is # found, an error is signalled. The found version is stored in # @var{GUILE_EFFECTIVE_VERSION}. # @@ -48,7 +48,7 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.]) # AC_DEFUN([GUILE_PKG], [PKG_PROG_PKG_CONFIG - _guile_versions_to_search="m4_default([$1], [2.2 2.0 1.8])" + _guile_versions_to_search="m4_default([$1], [3.0 2.2 2.0])" if test -n "$GUILE_EFFECTIVE_VERSION"; then _guile_tmp="" for v in $_guile_versions_to_search; do @@ -208,7 +208,7 @@ AC_DEFUN([GUILE_SITE_DIR], # as well. # # By default, this macro will search for the latest stable version of -# Guile (e.g. 2.2). x.y or x.y.z versions can be specified. If an older +# Guile (e.g. 3.0). x.y or x.y.z versions can be specified. If an older # version is found, the macro will signal an error. # # The effective version of the found @code{guile} is set to @@ -224,7 +224,7 @@ AC_DEFUN([GUILE_SITE_DIR], AC_DEFUN([GUILE_PROGS], [_guile_required_version="m4_default([$1], [$GUILE_EFFECTIVE_VERSION])" if test -z "$_guile_required_version"; then - _guile_required_version=2.2 + _guile_required_version=3.0 fi _guile_candidates=guile @@ -655,7 +655,7 @@ AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])dnl PKG_CHECK_VAR -# Copyright (C) 2002-2018 Free Software Foundation, Inc. +# Copyright (C) 2002-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -670,7 +670,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.16.1], [], +m4_if([$1], [1.16.2], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -686,14 +686,14 @@ m4_define([_AM_AUTOCONF_VERSION], []) # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.16.1])dnl +[AM_AUTOMAKE_VERSION([1.16.2])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# Copyright (C) 2001-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -745,7 +745,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd` # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# Copyright (C) 1996-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -942,7 +942,7 @@ for _am_header in $config_headers :; do done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# Copyright (C) 2001-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -963,7 +963,7 @@ if test x"${install_sh+set}" != xset; then fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2018 Free Software Foundation, Inc. +# Copyright (C) 2003-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -984,7 +984,7 @@ AC_SUBST([am__leading_dot])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2018 Free Software Foundation, Inc. +# Copyright (C) 1997-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1023,7 +1023,7 @@ fi # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# Copyright (C) 2001-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1054,7 +1054,7 @@ AC_DEFUN([_AM_IF_OPTION], # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# Copyright (C) 1996-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1135,7 +1135,7 @@ AC_CONFIG_COMMANDS_PRE( rm -f conftest.file ]) -# Copyright (C) 2009-2018 Free Software Foundation, Inc. +# Copyright (C) 2009-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1195,7 +1195,7 @@ AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# Copyright (C) 2001-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1223,7 +1223,7 @@ fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2018 Free Software Foundation, Inc. +# Copyright (C) 2006-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1242,7 +1242,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2018 Free Software Foundation, Inc. +# Copyright (C) 2004-2020 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, diff --git a/build-aux/install-sh b/build-aux/install-sh index 8175c64..20d8b2e 100755 --- a/build-aux/install-sh +++ b/build-aux/install-sh @@ -451,7 +451,18 @@ do trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + (umask $cp_umask && + { test -z "$stripcmd" || { + # Create $dsttmp read-write so that cp doesn't create it read-only, + # which would cause strip to fail. + if test -z "$doit"; then + : >"$dsttmp" # No need to fork-exec 'touch'. + else + $doit touch "$dsttmp" + fi + } + } && + $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # diff --git a/build-aux/mdate-sh b/build-aux/mdate-sh index 8c7a590..6a6a4bc 100755 --- a/build-aux/mdate-sh +++ b/build-aux/mdate-sh @@ -3,7 +3,7 @@ scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1995-2018 Free Software Foundation, Inc. +# Copyright (C) 1995-2020 Free Software Foundation, Inc. # written by Ulrich Drepper , June 1995 # # This program is free software; you can redistribute it and/or modify diff --git a/build-aux/missing b/build-aux/missing index 8e3d931..3d6cabf 100755 --- a/build-aux/missing +++ b/build-aux/missing @@ -3,7 +3,7 @@ scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# Copyright (C) 1996-2020 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex index ac5c1d9..deca599 100644 --- a/build-aux/texinfo.tex +++ b/build-aux/texinfo.tex @@ -1,14 +1,11 @@ % texinfo.tex -- TeX macros to handle Texinfo files. -% +% % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2018-02-12.17} +\def\texinfoversion{2020-02-11.09} % -% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 -% Free Software Foundation, Inc. +% Copyright 1985, 1986, 1988, 1990-2019 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -182,7 +179,7 @@ % Hyphenation fixes. \hyphenation{ Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script - auto-ma-ti-cal-ly ap-pen-dix bit-map bit-maps + ap-pen-dix bit-map bit-maps data-base data-bases eshell fall-ing half-way long-est man-u-script man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces @@ -221,7 +218,7 @@ % @errormsg{MSG}. Do the index-like expansions on MSG, but if things % aren't perfect, it's not the end of the world, being an error message, % after all. -% +% \def\errormsg{\begingroup \indexnofonts \doerrormsg} \def\doerrormsg#1{\errmessage{#1}} @@ -244,17 +241,7 @@ % \def\finalout{\overfullrule=0pt } -% Do @cropmarks to get crop marks. -% -\newif\ifcropmarks -\let\cropmarks = \cropmarkstrue -% -% Dimensions to add cropmarks at corners. -% Added by P. A. MacKay, 12 Nov. 1986 -% \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines -\newdimen\cornerlong \cornerlong=1pc -\newdimen\cornerthick \cornerthick=.3pt \newdimen\topandbottommargin \topandbottommargin=.75in % Output a mark which sets \thischapter, \thissection and \thiscolor. @@ -270,8 +257,8 @@ % \domark is called twice inside \chapmacro, to add one % mark before the section break, and one after. -% In the second call \prevchapterdefs is the same as \lastchapterdefs, -% and \prevsectiondefs is the same as \lastsectiondefs. +% In the second call \prevchapterdefs is the same as \currentchapterdefs, +% and \prevsectiondefs is the same as \currentsectiondefs. % Then if the page is not broken at the mark, some of the previous % section appears on the page, and we can get the name of this section % from \firstmark for @everyheadingmarks top. @@ -279,11 +266,11 @@ % % See page 260 of The TeXbook. \def\domark{% - \toks0=\expandafter{\lastchapterdefs}% - \toks2=\expandafter{\lastsectiondefs}% + \toks0=\expandafter{\currentchapterdefs}% + \toks2=\expandafter{\currentsectiondefs}% \toks4=\expandafter{\prevchapterdefs}% \toks6=\expandafter{\prevsectiondefs}% - \toks8=\expandafter{\lastcolordefs}% + \toks8=\expandafter{\currentcolordefs}% \mark{% \the\toks0 \the\toks2 % 0: marks for @everyheadingmarks top \noexpand\or \the\toks4 \the\toks6 % 1: for @everyheadingmarks bottom @@ -300,19 +287,19 @@ % @setcolor (or @url, or @link, etc.) between @contents and the very % first @chapter. \def\gettopheadingmarks{% - \ifcase0\topmark\fi + \ifcase0\the\savedtopmark\fi \ifx\thischapter\empty \ifcase0\firstmark\fi \fi } \def\getbottomheadingmarks{\ifcase1\botmark\fi} -\def\getcolormarks{\ifcase2\topmark\fi} +\def\getcolormarks{\ifcase2\the\savedtopmark\fi} % Avoid "undefined control sequence" errors. -\def\lastchapterdefs{} -\def\lastsectiondefs{} -\def\lastsection{} +\def\currentchapterdefs{} +\def\currentsectiondefs{} +\def\currentsection{} \def\prevchapterdefs{} \def\prevsectiondefs{} -\def\lastcolordefs{} +\def\currentcolordefs{} % Margin to add to right of even pages, to left of odd pages. \newdimen\bindingoffset @@ -322,51 +309,76 @@ % Main output routine. % \chardef\PAGE = 255 -\output = {\onepageout{\pagecontents\PAGE}} +\newtoks\defaultoutput +\defaultoutput = {\savetopmark\onepageout{\pagecontents\PAGE}} +\output=\expandafter{\the\defaultoutput} \newbox\headlinebox \newbox\footlinebox +% When outputting the double column layout for indices, an output routine +% is run several times, which hides the original value of \topmark. This +% can lead to a page heading being output and duplicating the chapter heading +% of the index. Hence, save the contents of \topmark at the beginning of +% the output routine. The saved contents are valid until we actually +% \shipout a page. +% +% (We used to run a short output routine to actually set \topmark and +% \firstmark to the right values, but if this was called with an empty page +% containing whatsits for writing index entries, the whatsits would be thrown +% away and the index auxiliary file would remain empty.) +% +\newtoks\savedtopmark +\newif\iftopmarksaved +\topmarksavedtrue +\def\savetopmark{% + \iftopmarksaved\else + \global\savedtopmark=\expandafter{\topmark}% + \global\topmarksavedtrue + \fi +} + % \onepageout takes a vbox as an argument. -% \shipout a vbox for a single page, adding an optional header, footer, -% cropmarks, and footnote. This also causes index entries for this page -% to be written to the auxiliary files. +% \shipout a vbox for a single page, adding an optional header, footer +% and footnote. This also causes index entries for this page to be written +% to the auxiliary files. % \def\onepageout#1{% - \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + \hoffset=\normaloffset % \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi % - % Common context changes for both heading and footing. - % Do this outside of the \shipout so @code etc. will be expanded in - % the headline as they should be, not taken literally (outputting ''code). - \def\commmonheadfootline{\let\hsize=\txipagewidth \texinfochars} - % % Retrieve the information for the headings from the marks in the page, % and call Plain TeX's \makeheadline and \makefootline, which use the % values in \headline and \footline. % % This is used to check if we are on the first page of a chapter. - \ifcase1\topmark\fi + \ifcase1\the\savedtopmark\fi \let\prevchaptername\thischaptername \ifcase0\firstmark\fi \let\curchaptername\thischaptername % \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi - \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi % \ifx\curchaptername\prevchaptername \let\thischapterheading\thischapter \else % \thischapterheading is the same as \thischapter except it is blank - % for the first page of a chapter. This is to prevent the chapter name + % for the first page of a chapter. This is to prevent the chapter name % being shown twice. \def\thischapterheading{}% \fi % - \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% - \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% + % Common context changes for both heading and footing. + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \def\commonheadfootline{\let\hsize=\txipagewidth \texinfochars} + % + \global\setbox\headlinebox = \vbox{\commonheadfootline \makeheadline}% + % + \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi + \global\setbox\footlinebox = \vbox{\commonheadfootline \makefootline}% % {% % Set context for writing to auxiliary files like index files. @@ -374,37 +386,12 @@ % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. % - \indexdummies % don't expand commands in the output. - \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. - % We don't want .vr (or whatever) entries like this: - % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}} - % "\acronym" won't work when it's read back in; - % it needs to be - % {\code {{\backslashcurfont }acronym} + \atdummies % don't expand commands in the output. + \turnoffactive \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi % - \ifcropmarks \vbox to \outervsize\bgroup - \hsize = \outerhsize - \vskip-\topandbottommargin - \vtop to0pt{% - \line{\ewtop\hfil\ewtop}% - \nointerlineskip - \line{% - \vbox{\moveleft\cornerthick\nstop}% - \hfill - \vbox{\moveright\cornerthick\nstop}% - }% - \vss}% - \vskip\topandbottommargin - \line\bgroup - \hfil % center the page within the outer (page) hsize. - \ifodd\pageno\hskip\bindingoffset\fi - \vbox\bgroup - \fi - % \unvbox\headlinebox \pagebody{#1}% \ifdim\ht\footlinebox > 0pt @@ -415,24 +402,9 @@ \unvbox\footlinebox \fi % - \ifcropmarks - \egroup % end of \vbox\bgroup - \hfil\egroup % end of (centering) \line\bgroup - \vskip\topandbottommargin plus1fill minus1fill - \boxmaxdepth = \cornerthick - \vbox to0pt{\vss - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% - }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% - }% - \egroup % \vbox from first cropmarks clause - \fi - }% end of \shipout\vbox - }% end of group with \indexdummies + }% + }% + \global\topmarksavedfalse \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } @@ -451,17 +423,6 @@ \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } -% Here are the rules for the cropmarks. Note that they are -% offset so that the space between them is truly \outerhsize or \outervsize -% (P. A. MacKay, 12 November, 1986) -% -\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} -\def\nstop{\vbox - {\hrule height\cornerthick depth\cornerlong width\cornerthick}} -\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} -\def\nsbot{\vbox - {\hrule height\cornerlong depth\cornerthick width\cornerthick}} - % Argument parsing @@ -487,11 +448,10 @@ }% } -% First remove any @comment, then any @c comment. Also remove a @texinfoc -% comment (see \scanmacro for details). Pass the result on to \argcheckspaces. +% First remove any @comment, then any @c comment. Pass the result on to +% \argcheckspaces. \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} -\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm} -\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} % Each occurrence of `\^^M' or `\^^M' is replaced by a single space. % @@ -1092,7 +1052,7 @@ where each line of input produces a line of output.} tex.sprint( string.format(string.char(0x5c) .. string.char(0x25) .. '03o' .. string.char(0x5c) .. string.char(0x25) .. '03o', - (c / 256), (c % 256))) + math.floor(c / 256), math.floor(c % 256))) else c = c - 0x10000 local c_hi = c / 1024 + 0xd800 @@ -1102,8 +1062,8 @@ where each line of input produces a line of output.} string.char(0x5c) .. string.char(0x25) .. '03o' .. string.char(0x5c) .. string.char(0x25) .. '03o' .. string.char(0x5c) .. string.char(0x25) .. '03o', - (c_hi / 256), (c_hi % 256), - (c_lo / 256), (c_lo % 256))) + math.floor(c_hi / 256), math.floor(c_hi % 256), + math.floor(c_lo / 256), math.floor(c_lo % 256))) end end end @@ -1116,15 +1076,19 @@ where each line of input produces a line of output.} function PDFescstr(str) for c in string.bytes(str) do if c <= 0x20 or c >= 0x80 or c == 0x28 or c == 0x29 or c == 0x5c then - tex.sprint( + tex.sprint(-2, string.format(string.char(0x5c) .. string.char(0x25) .. '03o', c)) else - tex.sprint(string.char(c)) + tex.sprint(-2, string.char(c)) end end end } + % The -2 in the arguments here gives all the input to TeX catcode 12 + % (other) or 10 (space), preventing undefined control sequence errors. See + % https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html + % \endgroup \def\pdfescapestring#1{\directlua{PDFescstr('\luaescapestring{#1}')}} \ifnum\luatexversion>84 @@ -1163,11 +1127,21 @@ where each line of input produces a line of output.} \fi \fi +\newif\ifpdforxetex +\pdforxetexfalse +\ifpdf + \pdforxetextrue +\fi +\ifx\XeTeXrevision\thisisundefined\else + \pdforxetextrue +\fi + + % PDF uses PostScript string constants for the names of xref targets, % for display in the outlines, and in other places. Thus, we have to % double any backslashes. Otherwise, a name like "\node" will be % interpreted as a newline (\n), followed by o, d, e. Not good. -% +% % See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and % related messages. The final outcome is that it is up to the TeX user % to double the backslashes and otherwise make the string valid, so @@ -1219,7 +1193,7 @@ output) for that.)} % Set color, and create a mark which defines \thiscolor accordingly, % so that \makeheadline knows which color to restore. \def\setcolor#1{% - \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}% \domark \pdfsetcolor{#1}% } @@ -1227,7 +1201,7 @@ output) for that.)} \def\maincolor{\rgbBlack} \pdfsetcolor{\maincolor} \edef\thiscolor{\maincolor} - \def\lastcolordefs{} + \def\currentcolordefs{} % \def\makefootline{% \baselineskip24pt @@ -1472,7 +1446,7 @@ output) for that.)} % their "best" equivalent, based on the @documentencoding. Too % much work for too little return. Just use the ASCII equivalents % we use for the index sort strings. - % + % \indexnofonts \setupdatafile % We can have normal brace characters in the PDF outlines, unlike @@ -1528,6 +1502,9 @@ output) for that.)} \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% \endgroup} + % \pdfgettoks - Surround page numbers in #1 with @pdflink. #1 may + % be a simple number, or a list of numbers in the case of an index + % entry. \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} @@ -1602,7 +1579,7 @@ output) for that.)} % Set color, and create a mark which defines \thiscolor accordingly, % so that \makeheadline knows which color to restore. \def\setcolor#1{% - \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}% \domark \pdfsetcolor{#1}% } @@ -1610,7 +1587,7 @@ output) for that.)} \def\maincolor{\rgbBlack} \pdfsetcolor{\maincolor} \edef\thiscolor{\maincolor} - \def\lastcolordefs{} + \def\currentcolordefs{} % \def\makefootline{% \baselineskip24pt @@ -2202,7 +2179,7 @@ end % A few fonts for @defun names and args. \setfont\defbf\bfshape{10}{\magstep1}{OT1} \setfont\deftt\ttshape{10}{\magstep1}{OT1TT} -\setfont\defsl\slshape{10}{\magstep1}{OT1TT} +\setfont\defsl\slshape{10}{\magstep1}{OT1} \setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} \def\df{\let\ttfont=\deftt \let\bffont = \defbf \let\ttslfont=\defttsl \let\slfont=\defsl \bf} @@ -2350,7 +2327,7 @@ end % A few fonts for @defun names and args. \setfont\defbf\bfshape{10}{\magstephalf}{OT1} \setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} -\setfont\defsl\slshape{10}{\magstephalf}{OT1TT} +\setfont\defsl\slshape{10}{\magstephalf}{OT1} \setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} \def\df{\let\ttfont=\deftt \let\bffont = \defbf \let\slfont=\defsl \let\ttslfont=\defttsl \bf} @@ -2753,7 +2730,7 @@ end } % Commands to set the quote options. -% +% \parseargdef\codequoteundirected{% \def\temp{#1}% \ifx\temp\onword @@ -2794,7 +2771,7 @@ end % If we are in a monospaced environment, however, 1) always use \ttsl, % and 2) do not add an italic correction. \def\dosmartslant#1#2{% - \ifusingtt + \ifusingtt {{\ttsl #2}\let\next=\relax}% {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}% \next @@ -2873,7 +2850,7 @@ end % @t, explicit typewriter. \def\t#1{% - {\tt \rawbackslash \plainfrenchspacing #1}% + {\tt \plainfrenchspacing #1}% \null } @@ -2900,7 +2877,6 @@ end % Turn off hyphenation. \nohyphenation % - \rawbackslash \plainfrenchspacing #1% }% @@ -2942,14 +2918,14 @@ end \gdef\codedash{\futurelet\next\codedashfinish} \gdef\codedashfinish{% \normaldash % always output the dash character itself. - % + % % Now, output a discretionary to allow a line break, unless % (a) the next character is a -, or % (b) the preceding character is a -. % E.g., given --posix, we do not want to allow a break after either -. % Given --foo-bar, we do want to allow a break between the - and the b. \ifx\next\codedash \else - \ifx\codedashprev\codedash + \ifx\codedashprev\codedash \else \discretionary{}{}{}\fi \fi % we need the space after the = for the case when \next itself is a @@ -3031,7 +3007,7 @@ end % For pdfTeX and LuaTeX \ifurefurlonlylink % PDF plus option to not display url, show just arg - \unhbox0 + \unhbox0 \else % PDF, normally display both arg and url for consistency, % visibility, if the pdf is eventually used to print, etc. @@ -3044,7 +3020,7 @@ end % For XeTeX \ifurefurlonlylink % PDF plus option to not display url, show just arg - \unhbox0 + \unhbox0 \else % PDF, normally display both arg and url for consistency, % visibility, if the pdf is eventually used to print, etc. @@ -3087,41 +3063,33 @@ end \global\def/{\normalslash} } -% we put a little stretch before and after the breakable chars, to help -% line breaking of long url's. The unequal skips make look better in -% cmtt at least, especially for dots. -\def\urefprestretchamount{.13em} -\def\urefpoststretchamount{.1em} -\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax} -\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax} -% -\def\urefcodeamp{\urefprestretch \&\urefpoststretch} -\def\urefcodedot{\urefprestretch .\urefpoststretch} -\def\urefcodehash{\urefprestretch \#\urefpoststretch} -\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeamp{\urefprebreak \&\urefpostbreak} +\def\urefcodedot{\urefprebreak .\urefpostbreak} +\def\urefcodehash{\urefprebreak \#\urefpostbreak} +\def\urefcodequest{\urefprebreak ?\urefpostbreak} \def\urefcodeslash{\futurelet\next\urefcodeslashfinish} { \catcode`\/=\active \global\def\urefcodeslashfinish{% - \urefprestretch \slashChar + \urefprebreak \slashChar % Allow line break only after the final / in a sequence of % slashes, to avoid line break between the slashes in http://. - \ifx\next/\else \urefpoststretch \fi + \ifx\next/\else \urefpostbreak \fi } } -% One more complication: by default we'll break after the special -% characters, but some people like to break before the special chars, so -% allow that. Also allow no breaking at all, for manual control. -% +% By default we'll break after the special characters, but some people like to +% break before the special chars, so allow that. Also allow no breaking at +% all, for manual control. +% \parseargdef\urefbreakstyle{% \def\txiarg{#1}% \ifx\txiarg\wordnone \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} \else\ifx\txiarg\wordbefore - \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \def\urefprebreak{\urefallowbreak}\def\urefpostbreak{\nobreak} \else\ifx\txiarg\wordafter - \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \def\urefprebreak{\nobreak}\def\urefpostbreak{\urefallowbreak} \else \errhelp = \EMsimple \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% @@ -3131,6 +3099,19 @@ end \def\wordbefore{before} \def\wordnone{none} +% Allow a ragged right output to aid breaking long URL's. There can +% be a break at the \allowbreak with no extra glue (if the existing stretch in +% the line is sufficent), a break at the \penalty100 with extra glue added +% at the end of the line, or no break at all here. +% Changing the value of the penalty and/or the amount of stretch affects how +% preferrable one choice is over the other. +\def\urefallowbreak{% + \allowbreak + \hskip 0pt plus 2 em\relax + \penalty300 + \hskip 0pt plus -2 em\relax +} + \urefbreakstyle after % @url synonym for @uref, since that's how everyone uses it. @@ -3141,7 +3122,7 @@ end % So now @email is just like @uref, unless we are pdf. % %\def\email#1{\angleleft{\tt #1}\angleright} -\ifpdf +\ifpdforxetex \def\email#1{\doemail#1,,\finish} \def\doemail#1,#2,#3\finish{\begingroup \unsepspaces @@ -3151,18 +3132,7 @@ end \endlink \endgroup} \else - \ifx\XeTeXrevision\thisisundefined - \let\email=\uref - \else - \def\email#1{\doemail#1,,\finish} - \def\doemail#1,#2,#3\finish{\begingroup - \unsepspaces - \pdfurl{mailto:#1}% - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi - \endlink - \endgroup} - \fi + \let\email=\uref \fi % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), @@ -3338,7 +3308,7 @@ end % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. -% +% \def\outfmtnametex{tex} % \long\def\inlinefmt#1{\doinlinefmt #1,\finish} @@ -3346,7 +3316,7 @@ end \def\inlinefmtname{#1}% \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi } -% +% % @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if % FMTNAME is tex, else ELSE-TEXT. \long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish} @@ -3362,7 +3332,7 @@ end % *right* brace they would have to use a command anyway, so they may as % well use a command to get a left brace too. We could re-use the % delimiter character idea from \verb, but it seems like overkill. -% +% \long\def\inlineraw{\tex \doinlineraw} \long\def\doinlineraw#1{\doinlinerawtwo #1,\finish} \def\doinlinerawtwo#1,#2,\finish{% @@ -3639,7 +3609,7 @@ end % for non-CM glyphs. That is ec* for regular text and tc* for the text % companion symbols (LaTeX TS1 encoding). Both are part of the ec % package and follow the same conventions. -% +% \def\ecfont{\etcfont{e}} \def\tcfont{\etcfont{t}} % @@ -3711,7 +3681,7 @@ end after the title page.}}% \def\setshortcontentsaftertitlepage{% \errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo - command; move your @shortcontents and @contents commands if you + command; move your @shortcontents and @contents commands if you want the contents after the title page.}}% \parseargdef\shorttitlepage{% @@ -3766,7 +3736,7 @@ end % don't worry much about spacing, ragged right. This should be used % inside a \vbox, and fonts need to be set appropriately first. \par should % be specified before the end of the \vbox, since a vbox is a group. -% +% \def\raggedtitlesettings{% \rm \hyphenpenalty=10000 @@ -4389,7 +4359,7 @@ end } % multitable-only commands. -% +% % @headitem starts a heading row, which we typeset in bold. Assignments % have to be global since we are inside the implicit group of an % alignment entry. \everycr below resets \everytab so we don't have to @@ -4696,19 +4666,6 @@ end } } -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we call \makevalueexpandable in \indexdummies). -% The command has to be fully expandable (if the variable is set), since -% the result winds up in the index file. This means that if the -% variable's value contains other Texinfo commands, it's almost certain -% it will fail (although perhaps we could fix that with sufficient work -% to do a one-level expansion on the result, instead of complete). -% -% Unfortunately, this has the consequence that when _ is in the *value* -% of an @set, it does not print properly in the roman fonts (get the cmr -% dot accent at position 126 instead). No fix comes to mind, and it's -% been this way since 2003 or earlier, so just ignore it. -% \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax {[No value for ``#1'']}% @@ -4721,13 +4678,13 @@ end % Like \expandablevalue, but completely expandable (the \message in the % definition above operates at the execution level of TeX). Used when % writing to auxiliary files, due to the expansion that \write does. -% If flag is undefined, pass through an unexpanded @value command: maybe it +% If flag is undefined, pass through an unexpanded @value command: maybe it % will be set by the time it is read back in. % % NB flag names containing - or _ may not work here. \def\dummyvalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax - \noexpand\value{#1}% + \string\value{#1}% \else \csname SET#1\endcsname \fi @@ -4737,7 +4694,7 @@ end % if possible, otherwise sort late. \def\indexnofontsvalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax - ZZZZZZZ + ZZZZZZZ% \else \csname SET#1\endcsname \fi @@ -4745,7 +4702,7 @@ end % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. -% +% % To get the special treatment we need for `@end ifset,' we call % \makecond and then redefine. % @@ -4778,7 +4735,7 @@ end % without the @) is in fact defined. We can only feasibly check at the % TeX level, so something like `mathcode' is going to considered % defined even though it is not a Texinfo command. -% +% \makecond{ifcommanddefined} \def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} % @@ -4886,30 +4843,16 @@ end \def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx} \def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}} - -% Used when writing an index entry out to an index file to prevent -% expansion of Texinfo commands that can appear in an index entry. -% -\def\indexdummies{% - \escapechar = `\\ % use backslash in output files. - \definedummyletter\@% - \definedummyletter\ % - % - % For texindex which always views { and } as separators. - \def\{{\lbracechar{}}% - \def\}{\rbracechar{}}% - % - % Do the redefinitions. - \definedummies -} -% Used for the aux and toc files, where @ is the escape character. +% Used for the aux, toc and index files to prevent expansion of Texinfo +% commands. % \def\atdummies{% \definedummyletter\@% \definedummyletter\ % \definedummyletter\{% \definedummyletter\}% + \definedummyletter\&% % % Do the redefinitions. \definedummies @@ -4933,8 +4876,7 @@ end \def\definedummyletter#1{\def#1{\string#1}}% \let\definedummyaccent\definedummyletter -% Called from \indexdummies and \atdummies, to effectively prevent -% the expansion of commands. +% Called from \atdummies to prevent the expansion of commands. % \def\definedummies{% % @@ -4981,8 +4923,10 @@ end \definedummyword\TeX % % Assorted special characters. + \definedummyword\ampchar \definedummyword\atchar \definedummyword\arrow + \definedummyword\backslashchar \definedummyword\bullet \definedummyword\comma \definedummyword\copyright @@ -5019,6 +4963,8 @@ end \definedummyword\sup \definedummyword\textdegree % + \definedummyword\subentry + % % We want to disable all macros so that they are not expanded by \write. \macrolist \let\value\dummyvalue @@ -5099,11 +5045,10 @@ end \commondummyword\xref } -% For testing: output @{ and @} in index sort strings as \{ and \}. -\newif\ifusebracesinindexes - \let\indexlbrace\relax \let\indexrbrace\relax +\let\indexatchar\relax +\let\indexbackslash\relax {\catcode`\@=0 \catcode`\\=13 @@ -5137,10 +5082,8 @@ end } \gdef\indexnonalnumreappear{% - \useindexbackslash \let-\normaldash \let<\normalless - \def\@{@}% } } @@ -5248,39 +5191,19 @@ end } \def\defglyph#1#2{\def#1##1{#2}} % see above - -\let\SETmarginindex=\relax % put index entries in margin (undocumented)? -% Most index entries go through here, but \dosubind is the general case. % #1 is the index name, #2 is the entry text. -\def\doind#1#2{\dosubind{#1}{#2}{}} - -% There is also \dosubind {index}{topic}{subtopic} -% which makes an entry in a two-level index such as the operation index. -% TODO: Two-level index? Operation index? - -% Workhorse for all indexes. -% #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% empty if called from \doind, as we usually are (the main exception -% is with most defuns, which call us directly). -% -\def\dosubind#1#2#3{% +\def\doind#1#2{% \iflinks {% - \requireopenindexfile{#1}% - % Store the main index entry text (including the third arg). - \toks0 = {#2}% - % If third arg is present, precede it with a space. - \def\thirdarg{#3}% - \ifx\thirdarg\empty \else - \toks0 = \expandafter{\the\toks0 \space #3}% - \fi % + \requireopenindexfile{#1}% \edef\writeto{\csname#1indfile\endcsname}% % - \safewhatsit\dosubindwrite + \def\indextext{#2}% + \safewhatsit\doindwrite }% \fi } @@ -5295,28 +5218,14 @@ end \ifx\suffix\indexisfl\def\suffix{f1}\fi % Open the file \immediate\openout\csname#1indfile\endcsname \jobname.\suffix - % Using \immediate above here prevents an object entering into the current + % Using \immediate above here prevents an object entering into the current % box, which could confound checks such as those in \safewhatsit for % preceding skips. \typeout{Writing index file \jobname.\suffix}% \fi} \def\indexisfl{fl} -% Output \ as {\indexbackslash}, because \ is an escape character in -% the index files. -\let\indexbackslash=\relax -{\catcode`\@=0 \catcode`\\=\active - @gdef@useindexbackslash{@def\{{@indexbackslash}}} -} - -% Definition for writing index entry text. -\def\sortas#1{\ignorespaces}% - -% Definition for writing index entry sort key. Should occur at the at -% the beginning of the index entry, like -% @cindex @sortas{september} \september -% The \ignorespaces takes care of following space, but there's no way -% to remove space before it. +% Definition for writing index entry sort key. { \catcode`\-=13 \gdef\indexwritesortas{% @@ -5327,51 +5236,150 @@ end \xdef\indexsortkey{#1}\endgroup} } +\def\indexwriteseealso#1{ + \gdef\pagenumbertext{\string\seealso{#1}}% +} +\def\indexwriteseeentry#1{ + \gdef\pagenumbertext{\string\seeentry{#1}}% +} + +% The default definitions +\def\sortas#1{}% +\def\seealso#1{\i{\putwordSeeAlso}\ #1}% for sorted index file only +\def\putwordSeeAlso{See also} +\def\seeentry#1{\i{\putwordSee}\ #1}% for sorted index file only -% Write the entry in \toks0 to the index file. + +% Given index entry text like "aaa @subentry bbb @sortas{ZZZ}": +% * Set \bracedtext to "{aaa}{bbb}" +% * Set \fullindexsortkey to "aaa @subentry ZZZ" +% * If @seealso occurs, set \pagenumbertext % -\def\dosubindwrite{% - % Put the index entry in the margin if desired. - \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% +\def\splitindexentry#1{% + \gdef\fullindexsortkey{}% + \xdef\bracedtext{}% + \def\sep{}% + \def\seealso##1{}% + \def\seeentry##1{}% + \expandafter\doindexsegment#1\subentry\finish\subentry +} + +% append the results from the next segment +\def\doindexsegment#1\subentry{% + \def\segment{#1}% + \ifx\segment\isfinish + \else + % + % Fully expand the segment, throwing away any @sortas directives, and + % trim spaces. + \edef\trimmed{\segment}% + \edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}% + % + \xdef\bracedtext{\bracedtext{\trimmed}}% + % + % Get the string to sort by. Process the segment with all + % font commands turned off. + \bgroup + \let\sortas\indexwritesortas + \let\seealso\indexwriteseealso + \let\seeentry\indexwriteseeentry + \indexnofonts + % The braces around the commands are recognized by texindex. + \def\lbracechar{{\string\indexlbrace}}% + \def\rbracechar{{\string\indexrbrace}}% + \let\{=\lbracechar + \let\}=\rbracechar + \def\@{{\string\indexatchar}}% + \def\atchar##1{\@}% + \def\backslashchar{{\string\indexbackslash}}% + \uccode`\~=`\\ \uppercase{\let~\backslashchar}% + % + \let\indexsortkey\empty + \global\let\pagenumbertext\empty + % Execute the segment and throw away the typeset output. This executes + % any @sortas or @seealso commands in this segment. + \setbox\dummybox = \hbox{\segment}% + \ifx\indexsortkey\empty{% + \indexnonalnumdisappear + \xdef\trimmed{\segment}% + \xdef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}% + \xdef\indexsortkey{\trimmed}% + \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi + }\fi + % + % Append to \fullindexsortkey. + \edef\tmp{\gdef\noexpand\fullindexsortkey{% + \fullindexsortkey\sep\indexsortkey}}% + \tmp + \egroup + \def\sep{\subentry}% + % + \expandafter\doindexsegment + \fi +} +\def\isfinish{\finish}% +\newbox\dummybox % used above + +\let\subentry\relax + +% Use \ instead of @ in index files. To support old texi2dvi and texindex. +% This works without changing the escape character used in the toc or aux +% files because the index entries are fully expanded here, and \string uses +% the current value of \escapechar. +\def\escapeisbackslash{\escapechar=`\\} + +% Use \ in index files by default. texi2dvi didn't support @ as the escape +% character (as it checked for "\entry" in the files, and not "@entry"). When +% the new version of texi2dvi has had a chance to become more prevalent, then +% the escape character can change back to @ again. This should be an easy +% change to make now because both @ and \ are only used as escape characters in +% index files, never standing for themselves. +% +\set txiindexescapeisbackslash + +% Write the entry in \indextext to the index file. +% +\def\doindwrite{% + \maybemarginindex + % + \atdummies + % + \expandafter\ifx\csname SETtxiindexescapeisbackslash\endcsname\relax\else + \escapeisbackslash \fi % - % Remember, we are within a group. - \indexdummies % Must do this here, since \bf, etc expand at this stage - \useindexbackslash % \indexbackslash isn't defined now so it will be output - % as is; and it will print as backslash. - % The braces around \indexbrace are recognized by texindex. - % - % Get the string to sort by, by processing the index entry with all - % font commands turned off. - {\indexnofonts - \def\lbracechar{{\indexlbrace}}% - \def\rbracechar{{\indexrbrace}}% - \let\{=\lbracechar - \let\}=\rbracechar - \indexnonalnumdisappear - \xdef\indexsortkey{}% - \let\sortas=\indexwritesortas - \edef\temp{\the\toks0}% - \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas - \ifx\indexsortkey\empty - \xdef\indexsortkey{\temp}% - \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi - \fi - }% + % For texindex which always views { and } as separators. + \def\{{\lbracechar{}}% + \def\}{\rbracechar{}}% + \uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}% + % + % Split the entry into primary entry and any subentries, and get the index + % sort key. + \splitindexentry\indextext % % Set up the complete index entry, with both the sort key and % the original text, including any font commands. We write % three arguments to \entry to the .?? file (four in the % subentry case), texindex reduces to two when writing the .??s % sorted result. + % \edef\temp{% \write\writeto{% - \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}% + \string\entry{\fullindexsortkey}% + {\ifx\pagenumbertext\empty\noexpand\folio\else\pagenumbertext\fi}% + \bracedtext}% }% \temp } -\newbox\dummybox % used above + +% Put the index entry in the margin if desired (undocumented). +\def\maybemarginindex{% + \ifx\SETmarginindex\relax\else + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \relax\indextext}}% + \fi +} +\let\SETmarginindex=\relax + % Take care of unwanted page breaks/skips around a whatsit: % @@ -5459,9 +5467,14 @@ end % \entry {topic}{pagelist} % for a topic that is used without subtopics % \primary {topic} +% \entry {topic}{} % for the beginning of a topic that is used with subtopics % \secondary {subtopic}{pagelist} % for each subtopic. +% \secondary {subtopic}{} +% for a subtopic with sub-subtopics +% \tertiary {subtopic}{subsubtopic}{pagelist} +% for each sub-subtopic. % Define the user-accessible indexing commands % @findex, @vindex, @kindex, @cindex. @@ -5473,11 +5486,6 @@ end \def\tindex {\tpindex} \def\pindex {\pgindex} -\def\cindexsub {\begingroup\obeylines\cindexsub} -{\obeylines % -\gdef\cindexsub "#1" #2^^M{\endgroup % -\dosubind{cp}{#2}{#1}}} - % Define the macros used in formatting output of the sorted index material. % @printindex causes a particular index (the ??s file) to get printed. @@ -5491,14 +5499,10 @@ end \plainfrenchspacing \everypar = {}% don't want the \kern\-parindent from indentation suppression. % - % See if the index file exists and is nonempty. - % Change catcode of @ here so that if the index file contains - % \initial {@} - % as its first line, TeX doesn't complain about mismatched braces - % (because it thinks @} is a control sequence). - \catcode`\@ = 12 % See comment in \requireopenindexfile. \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi + % + % See if the index file exists and is nonempty. \openin 1 \jobname.\indexname s \ifeof 1 % \enddoublecolumns gets confused if there is no text in the index, @@ -5508,8 +5512,6 @@ end \putwordIndexNonexistent \typeout{No file \jobname.\indexname s.}% \else - \catcode`\\ = 0 - % % If the index file exists but is empty, then \openin leaves \ifeof % false. We have to make TeX try to read something from the file, so % it can discover if there is anything in it. @@ -5517,47 +5519,51 @@ end \ifeof 1 \putwordIndexIsEmpty \else - % Index files are almost Texinfo source, but we use \ as the escape - % character. It would be better to use @, but that's too big a change - % to make right now. - \def\indexbackslash{\ttbackslash}% - \let\indexlbrace\{ % Likewise, set these sequences for braces - \let\indexrbrace\} % used in the sort key. - \begindoublecolumns - \let\dotheinsertentrybox\dotheinsertentryboxwithpenalty - % - % Read input from the index file line by line. - \loopdo - \ifeof1 \else - \read 1 to \nextline - \fi - % - \indexinputprocessing - \thisline - % - \ifeof1\else - \let\thisline\nextline - \repeat - %% - \enddoublecolumns + \expandafter\printindexzz\thisline\relax\relax\finish% \fi \fi \closein 1 \endgroup} -\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx} -\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next} -\def\indexinputprocessing{% - \ifeof1 - \let\firsttoken\relax +% If the index file starts with a backslash, forgo reading the index +% file altogether. If somebody upgrades texinfo.tex they may still have +% old index files using \ as the escape character. Reading this would +% at best lead to typesetting garbage, at worst a TeX syntax error. +\def\printindexzz#1#2\finish{% + \expandafter\ifx\csname SETtxiindexescapeisbackslash\endcsname\relax + \uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1 + \expandafter\ifx\csname SETtxiskipindexfileswithbackslash\endcsname\relax +\errmessage{% +ERROR: A sorted index file in an obsolete format was skipped. +To fix this problem, please upgrade your version of 'texi2dvi' +or 'texi2pdf' to that at . +If you are using an old version of 'texindex' (part of the Texinfo +distribution), you may also need to upgrade to a newer version (at least 6.0). +You may be able to typeset the index if you run +'texindex \jobname.\indexname' yourself. +You could also try setting the 'txiindexescapeisbackslash' flag by +running a command like +'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do +this, Texinfo will try to use index files in the old format. +If you continue to have problems, deleting the index files and starting again +might help (with 'rm \jobname.?? \jobname.??s')% +}% + \else + (Skipped sorted index file in obsolete format) + \fi + \else + \begindoublecolumns + \input \jobname.\indexname s + \enddoublecolumns + \fi \else - \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}% - \act + \begindoublecolumns + \catcode`\\=0\relax + \catcode`\@=12\relax + \input \jobname.\indexname s + \enddoublecolumns \fi } -\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken} -\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1} - % These macros are used by the sorted index file itself. % Change them to control the appearance of the index. @@ -5566,12 +5572,19 @@ end \catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13 \catcode`\$=3 \gdef\initialglyphs{% + % special control sequences used in the index sort key + \let\indexlbrace\{% + \let\indexrbrace\}% + \let\indexatchar\@% + \def\indexbackslash{\math{\backslash}}% + % % Some changes for non-alphabetic characters. Using the glyphs from the % math fonts looks more consistent than the typewriter font used elsewhere % for these characters. - \def\indexbackslash{\math{\backslash}}% - \let\\=\indexbackslash + \uccode`\~=`\\ \uppercase{\def~{\math{\backslash}}} % + % In case @\ is used for backslash + \uppercase{\let\\=~} % Can't get bold backslash so don't use bold forward slash \catcode`\/=13 \def/{{\secrmnotbold \normalslash}}% @@ -5601,7 +5614,7 @@ end % bottom of a column to reduce an increase in inter-line spacing. \nobreak \vskip 0pt plus 5\baselineskip - \penalty -300 + \penalty -300 \vskip 0pt plus -5\baselineskip % % Typeset the initial. Making this add up to a whole number of @@ -5630,12 +5643,6 @@ end % \def\entry{% \begingroup - % - % For pdfTeX and XeTeX. - % The redefinition of \domark stops marks being added in \pdflink to - % preserve coloured links across page boundaries. Otherwise the marks - % would get in the way of \lastbox in \insertentrybox. - \let\domark\relax % % Start a new paragraph if necessary, so our assignments below can't % affect previous text. @@ -5669,35 +5676,31 @@ end \gdef\finishentry#1{% \egroup % end box A \dimen@ = \wd\boxA % Length of text of entry - \global\setbox\boxA=\hbox\bgroup\unhbox\boxA - % #1 is the page number. - % - % Get the width of the page numbers, and only use - % leaders if they are present. - \global\setbox\boxB = \hbox{#1}% - \ifdim\wd\boxB = 0pt - \null\nobreak\hfill\ % - \else - % - \null\nobreak\indexdotfill % Have leaders before the page number. + \global\setbox\boxA=\hbox\bgroup + \unhbox\boxA + % #1 is the page number. % - \ifpdf - \pdfgettoks#1.% - \hskip\skip\thinshrinkable\the\toksA + % Get the width of the page numbers, and only use + % leaders if they are present. + \global\setbox\boxB = \hbox{#1}% + \ifdim\wd\boxB = 0pt + \null\nobreak\hfill\ % \else - \ifx\XeTeXrevision\thisisundefined - \hskip\skip\thinshrinkable #1% - \else + % + \null\nobreak\indexdotfill % Have leaders before the page number. + % + \ifpdforxetex \pdfgettoks#1.% \hskip\skip\thinshrinkable\the\toksA + \else + \hskip\skip\thinshrinkable #1% \fi \fi - \fi \egroup % end \boxA \ifdim\wd\boxB = 0pt - \global\setbox\entrybox=\vbox{\unhbox\boxA}% - \else - \global\setbox\entrybox=\vbox\bgroup + \noindent\unhbox\boxA\par + \nobreak + \else\bgroup % We want the text of the entries to be aligned to the left, and the % page numbers to be aligned to the right. % @@ -5727,7 +5730,7 @@ end \advance\dimen@ii by 1\dimen@i \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line \ifdim\dimen@ > 0.8\dimen@ii % due to long index text - % Try to split the text roughly evenly. \dimen@ will be the length of + % Try to split the text roughly evenly. \dimen@ will be the length of % the first line. \dimen@ = 0.7\dimen@ \dimen@ii = \hsize @@ -5763,55 +5766,11 @@ end \egroup % The \vbox \fi \endgroup - \dotheinsertentrybox }} \newskip\thinshrinkable \skip\thinshrinkable=.15em minus .15em -\newbox\entrybox -\def\insertentrybox{% - \ourunvbox\entrybox -} - -% default definition -\let\dotheinsertentrybox\insertentrybox - -% Use \lastbox to take apart vbox box by box, and add each sub-box -% to the current vertical list. -\def\ourunvbox#1{% -\bgroup % for local binding of \delayedbox - % Remove the last box from box #1 - \global\setbox#1=\vbox{% - \unvbox#1% - \unskip % remove any glue - \unpenalty - \global\setbox\interbox=\lastbox - }% - \setbox\delayedbox=\box\interbox - \ifdim\ht#1=0pt\else - \ourunvbox#1 % Repeat on what's left of the box - \nobreak - \fi - \box\delayedbox -\egroup -} -\newbox\delayedbox -\newbox\interbox - -% Used from \printindex. \firsttoken should be the first token -% after the \entry. If it's not another \entry, we are at the last -% line of a group of index entries, so insert a penalty to discourage -% widowed index entries. -\def\dotheinsertentryboxwithpenalty{% - \ifx\firsttoken\isentry - \else - \penalty 9000 - \fi - \insertentrybox -} -\def\isentry{\entry}% - % Like plain.tex's \dotfill, except uses up at least 1 em. % The filll stretch here overpowers both the fil and fill stretch to push % the page number to the right. @@ -5821,24 +5780,15 @@ end \def\primary #1{\line{#1\hfil}} -\newskip\secondaryindent \secondaryindent=0.5cm -\def\secondary#1#2{{% - \parfillskip=0in - \parskip=0in - \hangindent=1in - \hangafter=1 - \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill - \ifpdf - \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. - \else - \ifx\XeTeXrevision\thisisundefined - #2 - \else - \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. - \fi - \fi - \par -}} +\def\secondary{\indententry{0.5cm}} +\def\tertiary{\indententry{1cm}} + +\def\indententry#1#2#3{% + \bgroup + \leftskip=#1 + \entry{#2}{#3}% + \egroup +} % Define two-column mode, which we use to typeset indexes. % Adapted from the TeXbook, page 416, which is to say, @@ -5848,60 +5798,21 @@ end \newbox\partialpage \newdimen\doublecolumnhsize -% Use inside an output routine to save \topmark and \firstmark -\def\savemarks{% - \global\savedtopmark=\expandafter{\topmark }% - \global\savedfirstmark=\expandafter{\firstmark }% -} -\newtoks\savedtopmark -\newtoks\savedfirstmark - -% Set \topmark and \firstmark for next time \output runs. -% Can't be run from withinside \output (because any material -% added while an output routine is active, including -% penalties, is saved for after it finishes). The page so far -% should be empty, otherwise what's on it will be thrown away. -\def\restoremarks{% - \mark{\the\savedtopmark}% - \bgroup\output = {% - \setbox\dummybox=\box\PAGE - }abc\eject\egroup - % "abc" because output routine doesn't fire for a completely empty page. - \mark{\the\savedfirstmark}% -} - \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns % If not much space left on page, start a new page. \ifdim\pagetotal>0.8\vsize\vfill\eject\fi % % Grab any single-column material above us. \output = {% - % - % Here is a possibility not foreseen in manmac: if we accumulate a - % whole lot of material, we might end up calling this \output - % routine twice in a row (see the doublecol-lose test, which is - % essentially a couple of indexes with @setchapternewpage off). In - % that case we just ship out what is in \partialpage with the normal - % output routine. Generally, \partialpage will be empty when this - % runs and this will be a no-op. See the indexspread.tex test case. - \ifvoid\partialpage \else - \onepageout{\pagecontents\partialpage}% - \fi + \savetopmark % \global\setbox\partialpage = \vbox{% % Unvbox the main output page. \unvbox\PAGE \kern-\topskip \kern\baselineskip }% - \savemarks }% \eject % run that output routine to set \partialpage - \restoremarks - % - % We recover the two marks that the last output routine saved in order - % to propagate the information in marks added around a chapter heading, - % which could be otherwise be lost by the time the final page is output. - % % % Use the double-column output routine for subsequent pages. \output = {\doublecolumnout}% @@ -5927,7 +5838,9 @@ end \divide\doublecolumnhsize by 2 \hsize = \doublecolumnhsize % - % Double the \vsize as well. + % Get the available space for the double columns -- the normal + % (undoubled) page height minus any material left over from the + % previous page. \advance\vsize by -\ht\partialpage \vsize = 2\vsize % @@ -5940,17 +5853,15 @@ end % \def\doublecolumnout{% % + \savetopmark \splittopskip=\topskip \splitmaxdepth=\maxdepth - % Get the available space for the double columns -- the normal - % (undoubled) page height minus any material left over from the - % previous page. \dimen@ = \vsize \divide\dimen@ by 2 % % box0 will be the left-hand column, box2 the right. \setbox0=\vsplit\PAGE to\dimen@ \setbox2=\vsplit\PAGE to\dimen@ \global\advance\vsize by 2\ht\partialpage - \onepageout\pagesofar + \onepageout\pagesofar % empty except for the first time we are called \unvbox\PAGE \penalty\outputpenalty } @@ -5966,7 +5877,7 @@ end } -% Finished with with double columns. +% Finished with double columns. \def\enddoublecolumns{% % The following penalty ensures that the page builder is exercised % _before_ we change the output routine. This is necessary in the @@ -5998,7 +5909,7 @@ end % \output = {% % Split the last of the double-column material. - \savemarks + \savetopmark \balancecolumns }% \eject % call the \output just set @@ -6006,10 +5917,9 @@ end % Having called \balancecolumns once, we do not % want to call it again. Therefore, reset \output to its normal % definition right away. - \global\output = {\onepageout{\pagecontents\PAGE}}% + \global\output=\expandafter{\the\defaultoutput} % \endgroup % started in \begindoublecolumns - \restoremarks % Leave the double-column material on the current page, no automatic % page break. \box\balancedcolumns @@ -6028,18 +5938,19 @@ end \newbox\balancedcolumns \setbox\balancedcolumns=\vbox{shouldnt see this}% % -% Only called for the last of the double column material. \doublecolumnout +% Only called for the last of the double column material. \doublecolumnout % does the others. \def\balancecolumns{% \setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120. \dimen@ = \ht0 - \advance\dimen@ by \topskip - \advance\dimen@ by-\baselineskip - \ifdim\dimen@<5\baselineskip + \ifdim\dimen@<7\baselineskip % Don't split a short final column in two. \setbox2=\vbox{}% \global\setbox\balancedcolumns=\vbox{\pagesofar}% \else + % double the leading vertical space + \advance\dimen@ by \topskip + \advance\dimen@ by-\baselineskip \divide\dimen@ by 2 % target to split to \dimen@ii = \dimen@ \splittopskip = \topskip @@ -6055,7 +5966,7 @@ end }% % Now the left column is in box 1, and the right column in box 3. % - % Check whether the left column has come out higher than the page itself. + % Check whether the left column has come out higher than the page itself. % (Note that we have doubled \vsize for the double columns, so % the actual height of the page is 0.5\vsize). \ifdim2\ht1>\vsize @@ -6174,11 +6085,9 @@ end % @raisesections: treat @section as chapter, @subsection as section, etc. \def\raisesections{\global\advance\secbase by -1} -\let\up=\raisesections % original BFox name % @lowersections: treat @chapter as section, @section as subsection, etc. \def\lowersections{\global\advance\secbase by 1} -\let\down=\lowersections % original BFox name % we only have subsub. \chardef\maxseclevel = 3 @@ -6354,7 +6263,7 @@ end \let\top\unnumbered % Sections. -% +% \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz \def\seczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 @@ -6377,7 +6286,7 @@ end } % Subsections. -% +% % normally calls numberedsubseczzz: \outer\parseargdef\numberedsubsec{\numhead2{#1}} \def\numberedsubseczzz#1{% @@ -6402,7 +6311,7 @@ end } % Subsubsections. -% +% % normally numberedsubsubseczzz: \outer\parseargdef\numberedsubsubsec{\numhead3{#1}} \def\numberedsubsubseczzz#1{% @@ -6523,27 +6432,22 @@ end \expandafter\ifx\thisenv\titlepage\else \checkenv{}% chapters, etc., should not start inside an environment. \fi - % FIXME: \chapmacro is currently called from inside \titlepage when - % \setcontentsaftertitlepage to print the "Table of Contents" heading, but - % this should probably be done by \sectionheading with an option to print - % in chapter size. - % % Insert the first mark before the heading break (see notes for \domark). - \let\prevchapterdefs=\lastchapterdefs - \let\prevsectiondefs=\lastsectiondefs - \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% + \let\prevchapterdefs=\currentchapterdefs + \let\prevsectiondefs=\currentsectiondefs + \gdef\currentsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% \gdef\thissection{}}% % \def\temptype{#2}% \ifx\temptype\Ynothingkeyword - \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% \gdef\thischapter{\thischaptername}}% \else\ifx\temptype\Yomitfromtockeyword - \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% \gdef\thischapter{}}% \else\ifx\temptype\Yappendixkeyword \toks0={#1}% - \xdef\lastchapterdefs{% + \xdef\currentchapterdefs{% \gdef\noexpand\thischaptername{\the\toks0}% \gdef\noexpand\thischapternum{\appendixletter}% % \noexpand\putwordAppendix avoids expanding indigestible @@ -6554,7 +6458,7 @@ end }% \else \toks0={#1}% - \xdef\lastchapterdefs{% + \xdef\currentchapterdefs{% \gdef\noexpand\thischaptername{\the\toks0}% \gdef\noexpand\thischapternum{\the\chapno}% % \noexpand\putwordChapter avoids expanding indigestible @@ -6574,18 +6478,18 @@ end % % Now the second mark, after the heading break. No break points % between here and the heading. - \let\prevchapterdefs=\lastchapterdefs - \let\prevsectiondefs=\lastsectiondefs + \let\prevchapterdefs=\currentchapterdefs + \let\prevsectiondefs=\currentsectiondefs \domark % {% \chapfonts \rm \let\footnote=\errfootnoteheading % give better error message % - % Have to define \lastsection before calling \donoderef, because the + % Have to define \currentsection before calling \donoderef, because the % xref code eventually uses it. On the other hand, it has to be called % after \pchapsepmacro, or the headline will change too soon. - \gdef\lastsection{#1}% + \gdef\currentsection{#1}% % % Only insert the separating space if we have a chapter/appendix % number, and don't print the unnumbered ``number''. @@ -6674,10 +6578,10 @@ end \csname #2fonts\endcsname \rm % % Insert first mark before the heading break (see notes for \domark). - \let\prevsectiondefs=\lastsectiondefs + \let\prevsectiondefs=\currentsectiondefs \ifx\temptype\Ynothingkeyword \ifx\sectionlevel\seckeyword - \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% + \gdef\currentsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% \gdef\thissection{\thissectionname}}% \fi \else\ifx\temptype\Yomitfromtockeyword @@ -6685,7 +6589,7 @@ end \else\ifx\temptype\Yappendixkeyword \ifx\sectionlevel\seckeyword \toks0={#1}% - \xdef\lastsectiondefs{% + \xdef\currentsectiondefs{% \gdef\noexpand\thissectionname{\the\toks0}% \gdef\noexpand\thissectionnum{#4}% % \noexpand\putwordSection avoids expanding indigestible @@ -6698,7 +6602,7 @@ end \else \ifx\sectionlevel\seckeyword \toks0={#1}% - \xdef\lastsectiondefs{% + \xdef\currentsectiondefs{% \gdef\noexpand\thissectionname{\the\toks0}% \gdef\noexpand\thissectionnum{#4}% % \noexpand\putwordSection avoids expanding indigestible @@ -6724,28 +6628,28 @@ end % % Now the second mark, after the heading break. No break points % between here and the heading. - \global\let\prevsectiondefs=\lastsectiondefs + \global\let\prevsectiondefs=\currentsectiondefs \domark % % Only insert the space after the number if we have a section number. \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unn}% - \gdef\lastsection{#1}% + \gdef\currentsection{#1}% \else\ifx\temptype\Yomitfromtockeyword % for @headings -- no section number, don't include in toc, - % and don't redefine \lastsection. + % and don't redefine \currentsection. \setbox0 = \hbox{}% \def\toctype{omit}% \let\sectionlevel=\empty \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{#4\enspace}% \def\toctype{app}% - \gdef\lastsection{#1}% + \gdef\currentsection{#1}% \else \setbox0 = \hbox{#4\enspace}% \def\toctype{num}% - \gdef\lastsection{#1}% + \gdef\currentsection{#1}% \fi\fi\fi % % Write the toc entry (before \donoderef). See comments in \chapmacro. @@ -6835,13 +6739,8 @@ end % 1 and 2 (the page numbers aren't printed), and so are the first % two pages of the document. Thus, we'd have two destinations named % `1', and two named `2'. - \ifpdf + \ifpdforxetex \global\pdfmakepagedesttrue - \else - \ifx\XeTeXrevision\thisisundefined - \else - \global\pdfmakepagedesttrue - \fi \fi } @@ -7204,11 +7103,7 @@ end % @cartouche ... @end cartouche: draw rectangle w/rounded corners around % environment contents. -\font\circle=lcircle10 -\newdimen\circthick -\newdimen\cartouter\newdimen\cartinner -\newskip\normbskip\newskip\normpskip\newskip\normlskip -\circthick=\fontdimen8\circle + % \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth \def\ctr{{\hskip 6pt\circle\char'010}} @@ -7223,7 +7118,18 @@ end % \newskip\lskip\newskip\rskip +% only require the font if @cartouche is actually used +\def\cartouchefontdefs{% + \font\circle=lcircle10\relax + \circthick=\fontdimen8\circle +} +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip + + \envdef\cartouche{% + \cartouchefontdefs \ifhmode\par\fi % can't be in the midst of a paragraph. \startsavinginserts \lskip=\leftskip \rskip=\rightskip @@ -7402,13 +7308,9 @@ end % @raggedright does more-or-less normal line breaking but no right -% justification. From plain.tex. Don't stretch around special -% characters in urls in this environment, since the stretch at the right -% should be enough. +% justification. From plain.tex. \envdef\raggedright{% \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax - \def\urefprestretchamount{0pt}% - \def\urefpoststretchamount{0pt}% } \let\Eraggedright\par @@ -7467,7 +7369,7 @@ end % @indentedblock is like @quotation, but indents only on the left and % has no optional argument. -% +% \makedispenvdef{indentedblock}{\indentedblockstart} % \def\indentedblockstart{% @@ -7570,7 +7472,7 @@ end \nonfillstart \tt % easiest (and conventionally used) font for verbatim % The \leavevmode here is for blank lines. Otherwise, we would - % never \starttabox and the \egroup would end verbatim mode. + % never \starttabbox and the \egroup would end verbatim mode. \def\par{\leavevmode\egroup\box\verbbox\endgraf}% \tabexpand \setupmarkupstyle{verbatim}% @@ -7633,9 +7535,12 @@ end {% \makevalueexpandable \setupverbatim - \indexnofonts % Allow `@@' and other weird things in file names. - \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% - \input #1 + {% + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% + \edef\tmp{\noexpand\input #1 } + \expandafter + }\tmp \afterenvbreak }% } @@ -7764,7 +7669,7 @@ end % @deftypefnnewline on|off says whether the return type of typed functions % are printed on their own line. This affects @deftypefn, @deftypefun, % @deftypeop, and @deftypemethod. -% +% \parseargdef\deftypefnnewline{% \def\temp{#1}% \ifx\temp\onword @@ -7780,6 +7685,21 @@ end \fi\fi } +% \dosubind {index}{topic}{subtopic} +% +% If SUBTOPIC is present, precede it with a space, and call \doind. +% (At some time during the 20th century, this made a two-level entry in an +% index such as the operation index. Nobody seemed to notice the change in +% behaviour though.) +\def\dosubind#1#2#3{% + \def\thirdarg{#3}% + \ifx\thirdarg\empty + \doind{#1}{#2}% + \else + \doind{#1}{#2\space#3}% + \fi +} + % Untyped functions: % @deffn category name args @@ -7794,7 +7714,6 @@ end % \deffngeneral {subind}category name args % \def\deffngeneral#1#2 #3 #4\endheader{% - % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. \dosubind{fn}{\code{#3}}{#1}% \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } @@ -7945,7 +7864,7 @@ end \tclose{\temp}% typeset the return type \ifrettypeownline % put return type on its own line; prohibit line break following: - \hfil\vadjust{\nobreak}\break + \hfil\vadjust{\nobreak}\break \else \space % type on same line, so just followed by a space \fi @@ -8001,6 +7920,7 @@ end \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} \gdef\magicamp{\let&=\amprm} } +\let\ampchar\& \newcount\parencount @@ -8081,36 +8001,18 @@ end } \fi -% alias because \c means cedilla in @tex or @math -\let\texinfoc=\c - -\newcount\savedcatcodeone -\newcount\savedcatcodetwo - % Used at the time of macro expansion. % Argument is macro body with arguments substituted \def\scanmacro#1{% \newlinechar`\^^M \def\xeatspaces{\eatspaces}% % - % Temporarily undo catcode changes of \printindex. Set catcode of @ to - % 0 so that @-commands in macro expansions aren't printed literally when - % formatting an index file, where \ is used as the escape character. - \savedcatcodeone=\catcode`\@ - \savedcatcodetwo=\catcode`\\ - \catcode`\@=0 - \catcode`\\=\active - % % Process the macro body under the current catcode regime. - \scantokens{#1@texinfoc}% + \scantokens{#1@comment}% % - \catcode`\@=\savedcatcodeone - \catcode`\\=\savedcatcodetwo - % - % The \texinfoc is to remove the \newlinechar added by \scantokens, and - % can be noticed by \parsearg. - % We avoid surrounding the call to \scantokens with \bgroup and \egroup - % to allow macros to open or close groups themselves. + % The \comment is to remove the \newlinechar added by \scantokens, and + % can be noticed by \parsearg. Note \c isn't used because this means cedilla + % in math mode. } % Used for copying and captions @@ -8211,12 +8113,14 @@ end \def\macroargctxt{% \scanctxt \catcode`\ =\active + \catcode`\@=\other \catcode`\^^M=\other \catcode`\\=\active } \def\macrolineargctxt{% used for whole-line arguments without braces \scanctxt + \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other } @@ -8308,7 +8212,7 @@ end % list to some hook where the argument is to be expanded. If there are % less than 10 arguments that hook is to be replaced by ##N where N % is the position in that list, that is to say the macro arguments are to be -% defined `a la TeX in the macro body. +% defined `a la TeX in the macro body. % % That gets used by \mbodybackslash (above). % @@ -8339,8 +8243,8 @@ end % % Read recursive and nonrecursive macro bodies. (They're different since % rec and nonrec macros end differently.) -% -% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro +% +% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro % body to be transformed. % Set \macrobody to the body of the macro, and call \defmacro. % @@ -8374,7 +8278,7 @@ end % twice the \macarg.BLAH macros does not cost too much processing power. \def\parsemmanyargdef@@#1,{% \if#1;\let\next=\relax - \else + \else \let\next=\parsemmanyargdef@@ \edef\tempb{\eatspaces{#1}}% \expandafter\def\expandafter\tempa @@ -8459,7 +8363,7 @@ end % Replace arguments by their values in the macro body, and place the result % in macro \@tempa. -% +% \def\macvalstoargs@{% % To do this we use the property that token registers that are \the'ed % within an \edef expand only once. So we are going to place all argument @@ -8483,9 +8387,9 @@ end \expandafter\def\expandafter\@tempa\expandafter{\@tempc}% } -% Define the named-macro outside of this group and then close this group. -% -\def\macargexpandinbody@{% +% Define the named-macro outside of this group and then close this group. +% +\def\macargexpandinbody@{% \expandafter \endgroup \macargdeflist@ @@ -8523,7 +8427,7 @@ end } % Trailing missing arguments are set to empty. -% +% \def\setemptyargvalues@{% \ifx\paramlist\nilm@ \let\next\macargexpandinbody@ @@ -8600,7 +8504,7 @@ end \else % at most 9 \ifnum\paramno<10\relax % @MACNAME sets the context for reading the macro argument - % @MACNAME@@ gets the argument, processes backslashes and appends a + % @MACNAME@@ gets the argument, processes backslashes and appends a % comma. % @MACNAME@@@ removes braces surrounding the argument list. % @MACNAME@@@@ scans the macro body with arguments substituted. @@ -8644,11 +8548,11 @@ end % Call #1 with a list of tokens #2, with any doubled backslashes in #2 % compressed to one. % -% This implementation works by expansion, and not execution (so we cannot use -% \def or similar). This reduces the risk of this failing in contexts where -% complete expansion is done with no execution (for example, in writing out to +% This implementation works by expansion, and not execution (so we cannot use +% \def or similar). This reduces the risk of this failing in contexts where +% complete expansion is done with no execution (for example, in writing out to % an auxiliary file for an index entry). -% +% % State is kept in the input stream: the argument passed to % @look_ahead, @gobble_and_check_finish and @add_segment is % @@ -8670,11 +8574,11 @@ end % #3 - NEXT_TOKEN % #4 used to look ahead % -% If the next token is not a backslash, process the rest of the argument; +% If the next token is not a backslash, process the rest of the argument; % otherwise, remove the next token. @gdef@look_ahead#1!#2#3#4{% @ifx#4\% - @expandafter@gobble_and_check_finish + @expandafter@gobble_and_check_finish @else @expandafter@add_segment @fi#1!{#2}#4#4% @@ -8698,9 +8602,9 @@ end % #3 - NEXT_TOKEN % #4 is input stream until next backslash % -% Input stream is either at the start of the argument, or just after a -% backslash sequence, either a lone backslash, or a doubled backslash. -% NEXT_TOKEN contains the first token in the input stream: if it is \finish, +% Input stream is either at the start of the argument, or just after a +% backslash sequence, either a lone backslash, or a doubled backslash. +% NEXT_TOKEN contains the first token in the input stream: if it is \finish, % finish; otherwise, append to ARG_RESULT the segment of the argument up until % the next backslash. PENDING_BACKSLASH contains a backslash to represent % a backslash just before the start of the input stream that has not been @@ -8712,13 +8616,13 @@ end % append the pending backslash to the result, followed by the next segment @expandafter@is_fi@look_ahead#1#2#4!{\}@fi % this @fi is discarded by @look_ahead. - % we can't get rid of it with \expandafter because we don't know how + % we can't get rid of it with \expandafter because we don't know how % long #4 is. } % #1 - THE_MACRO % #2 - ARG_RESULT -% #3 discards the res of the conditional in @add_segment, and @is_fi ends the +% #3 discards the res of the conditional in @add_segment, and @is_fi ends the % conditional. @gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}} @@ -8730,7 +8634,7 @@ end % for reading the argument (slightly different in the two cases). Then, % to read the argument, in the whole-line case, it then calls the regular % \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC. -% +% \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup @@ -8780,9 +8684,29 @@ end % also remove a trailing comma, in case of something like this: % @node Help-Cross, , , Cross-refs \def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} -\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}\omittopnode} + +% Used so that the @top node doesn't have to be wrapped in an @ifnottex +% conditional. +% \doignore goes to more effort to skip nested conditionals but we don't need +% that here. +\def\omittopnode{% + \ifx\lastnode\wordTop + \expandafter\ignorenode\fi +} +\def\wordTop{Top} + +% Until the next @node or @bye command, divert output to a box that is not +% output. +\def\ignorenode{\setbox\dummybox\vbox\bgroup\def\node{\egroup\node}% +\ignorenodebye +} + +{\let\bye\relax +\gdef\ignorenodebye{\let\bye\ignorenodebyedef} +\gdef\ignorenodebyedef{\egroup(`Top' node ignored)\bye}} +% The redefinition of \bye here is because it is declared \outer -\let\nwnode=\node \let\lastnode=\empty % Write a cross-reference definition for the current node. #1 is the @@ -8805,7 +8729,7 @@ end % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an % anchor), which consists of three parts: -% 1) NAME-title - the current sectioning name taken from \lastsection, +% 1) NAME-title - the current sectioning name taken from \currentsection, % or the anchor name. % 2) NAME-snt - section number and type, passed as the SNT arg, or % empty for anchors. @@ -8827,7 +8751,7 @@ end \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef ##1}{##2}}% these are parameters of \writexrdef }% - \toks0 = \expandafter{\lastsection}% + \toks0 = \expandafter{\currentsection}% \immediate \writexrdef{title}{\the\toks0 }% \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout @@ -8839,7 +8763,7 @@ end % automatically in xrefs, if the third arg is not explicitly specified. % This was provided as a "secret" @set xref-automatic-section-title % variable, now it's official. -% +% \parseargdef\xrefautomaticsectiontitle{% \def\temp{#1}% \ifx\temp\onword @@ -8855,7 +8779,7 @@ end \fi\fi } -% +% % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -9008,40 +8932,34 @@ end \fi \else % node/anchor (non-float) references. - % + % % If we use \unhbox to print the node names, TeX does not insert % empty discretionaries after hyphens, which means that it will not % find a line break at a hyphen in a node names. Since some manuals % are best written with fairly long node names, containing hyphens, % this is a loss. Therefore, we give the text of the node name % again, so it is as if TeX is seeing it for the first time. - % + % \ifdim \wd\printedmanualbox > 0pt % Cross-manual reference with a printed manual name. - % + % \crossmanualxref{\cite{\printedmanual\unskip}}% % \else\ifdim \wd\infofilenamebox > 0pt % Cross-manual reference with only an info filename (arg 4), no % printed manual name (arg 5). This is essentially the same as % the case above; we output the filename, since we have nothing else. - % + % \crossmanualxref{\code{\infofilename\unskip}}% % \else % Reference within this manual. % - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\turnoffactive - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + % % output the `[mynode]' via the macro below so it can be overridden. \xrefprintnodename\printedrefname % @@ -9065,20 +8983,20 @@ end \endgroup} % Output a cross-manual xref to #1. Used just above (twice). -% +% % Only include the text "Section ``foo'' in" if the foo is neither % missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply % "see The Foo Manual", the idea being to refer to the whole manual. -% +% % But, this being TeX, we can't easily compare our node name against the % string "Top" while ignoring the possible spaces before and after in % the input. By adding the arbitrary 7sp below, we make it much less % likely that a real node name would have the same width as "Top" (e.g., % in a monospaced font). Hopefully it will never happen in practice. -% +% % For the same basic reason, we retypeset the "Top" at every % reference, since the current font is indeterminate. -% +% \def\crossmanualxref#1{% \setbox\toprefbox = \hbox{Top\kern7sp}% \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% @@ -9125,13 +9043,13 @@ end \fi\fi\fi } -% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX +% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX % is output afterwards if non-empty. \def\refx#1#2{% \requireauxfile {% \indexnofonts - \otherbackslash + \turnoffactive \def\value##1{##1}% \expandafter\global\expandafter\let\expandafter\thisrefX \csname XR#1\endcsname @@ -9157,9 +9075,9 @@ end #2% Output the suffix in any case. } -% This is the macro invoked by entries in the aux file. Define a control -% sequence for a cross-reference target (we prepend XR to the control sequence -% name to avoid collisions). The value is the page number. If this is a float +% This is the macro invoked by entries in the aux file. Define a control +% sequence for a cross-reference target (we prepend XR to the control sequence +% name to avoid collisions). The value is the page number. If this is a float % type, we have more work to do. % \def\xrdef#1#2{% @@ -9175,10 +9093,10 @@ end \bgroup \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% \egroup - % We put the \gdef inside a group to avoid the definitions building up on - % TeX's save stack, which can cause it to run out of space for aux files with + % We put the \gdef inside a group to avoid the definitions building up on + % TeX's save stack, which can cause it to run out of space for aux files with % thousands of lines. \gdef doesn't use the save stack, but \csname does - % when it defines an unknown control sequence as \relax. + % when it defines an unknown control sequence as \relax. % % Was that xref control sequence that we just defined for a float? \expandafter\iffloat\csname XR\safexrefname\endcsname @@ -9257,19 +9175,6 @@ end \catcode`\^^]=\other \catcode`\^^^=\other \catcode`\^^_=\other - % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. - % in xref tags, i.e., node names. But since ^^e4 notation isn't - % supported in the main text, it doesn't seem desirable. Furthermore, - % that is not enough: for node names that actually contain a ^ - % character, we would end up writing a line like this: 'xrdef {'hat - % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first - % argument, and \hat is not an expandable control sequence. It could - % all be worked out, but why? Either we support ^^ or we don't. - % - % The other change necessary for this was to define \auxhat: - % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter - % and then to call \auxhat in \setq. - % \catcode`\^=\other % % Special characters. Should be turned off anyway, but... @@ -9287,14 +9192,7 @@ end \catcode`\%=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off % - % This is to support \ in node names and titles, since the \ - % characters end up in a \csname. It's easier than - % leaving it active and making its active definition an actual \ - % character. What I don't understand is why it works in the *value* - % of the xrdef. Seems like it should be a catcode12 \, and that - % should not typeset properly. But it works, so I'm moving on for - % now. --karl, 15jan04. - \catcode`\\=\other + \catcode`\\=\active % % @ is our escape character in .aux files, and we need braces. \catcode`\{=1 @@ -9557,7 +9455,7 @@ end % \ifimagevmode \medskip % space after a standalone image - \fi + \fi \ifx\centersub\centerV \egroup \fi \endgroup} @@ -9625,13 +9523,13 @@ end \global\advance\floatno by 1 % {% - % This magic value for \lastsection is output by \setref as the + % This magic value for \currentsection is output by \setref as the % XREFLABEL-title value. \xrefX uses it to distinguish float % labels (which have a completely different output format) from % node and anchor labels. And \xrdef uses it to construct the % lists of floats. % - \edef\lastsection{\floatmagic=\safefloattype}% + \edef\currentsection{\floatmagic=\safefloattype}% \setref{\floatlabel}{Yfloat}% }% \fi @@ -9754,7 +9652,7 @@ end % #1 is the control sequence we are passed; we expand into a conditional % which is true if #1 represents a float ref. That is, the magic -% \lastsection value which we \setref above. +% \currentsection value which we \setref above. % \def\iffloat#1{\expandafter\doiffloat#1==\finish} % @@ -10388,7 +10286,7 @@ directory should work if nowhere else does.} \uppercase{.} \endgroup \else - \errhelp = \EMsimple + \errhelp = \EMsimple \errmessage{Unicode character U+#1 not supported, sorry}% \fi \else @@ -10421,7 +10319,7 @@ directory should work if nowhere else does.} \countUTFz = "#1\relax \begingroup \parseXMLCharref - + % Give \u8:... its definition. The sequence of seven \expandafter's % expands after the \gdef three times, e.g. % @@ -10433,7 +10331,7 @@ directory should work if nowhere else does.} \expandafter\expandafter \expandafter\expandafter \expandafter\gdef \UTFviiiTmp{#2}% - % + % \expandafter\ifx\csname uni:#1\endcsname \relax \else \message{Internal error, already defined: #1}% \fi @@ -10472,7 +10370,7 @@ directory should work if nowhere else does.} \divide\countUTFz by 64 \countUTFy = \countUTFz % Save to be the future value of \countUTFz. \multiply\countUTFz by 64 - + % \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract % in order to get the last five bits. \advance\countUTFx by -\countUTFz @@ -10507,7 +10405,7 @@ directory should work if nowhere else does.} % U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block) % U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A % U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B -% +% % Many of our renditions are less than wonderful, and all the missing % characters are available somewhere. Loading the necessary fonts % awaits user request. We can't truly support Unicode without @@ -11242,21 +11140,14 @@ directory should work if nowhere else does.} \relax } -% define all Unicode characters we know about, for the sake of @U. +% Define all Unicode characters we know about. This makes UTF-8 the default +% input encoding and allows @U to work. \iftxinativeunicodecapable \nativeunicodechardefsatu \else \utfeightchardefs \fi - -% Make non-ASCII characters printable again for compatibility with -% existing Texinfo documents that may use them, even without declaring a -% document encoding. -% -\setnonasciicharscatcode \other - - \message{formatting,} \newdimen\defaultparindent \defaultparindent = 15pt @@ -11552,9 +11443,9 @@ directory should work if nowhere else does.} \def\texinfochars{% \let< = \activeless \let> = \activegtr - \let~ = \activetilde + \let~ = \activetilde \let^ = \activehat - \markupsetuplqdefault \markupsetuprqdefault + \markupsetuplqdefault \markupsetuprqdefault \let\b = \strong \let\i = \smartitalic % in principle, all other definitions in \tex have to be undone too. @@ -11572,11 +11463,9 @@ directory should work if nowhere else does.} % \backslashcurfont outputs one backslash character in current font, % as in \char`\\. \global\chardef\backslashcurfont=`\\ -\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work -% \realbackslash is an actual character `\' with catcode other, and -% \doublebackslash is two of them (for the pdf outlines). -{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} +% \realbackslash is an actual character `\' with catcode other. +{\catcode`\\=\other @gdef@realbackslash{\}} % In Texinfo, backslash is an active character; it prints the backslash % in fixed width font. @@ -11594,10 +11483,8 @@ directory should work if nowhere else does.} @def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} @let@backslashchar = @ttbackslash % @backslashchar{} is for user documents. -% \rawbackslash defines an active \ to do \backslashcurfont. % \otherbackslash defines an active \ to be a literal `\' character with -% catcode other. We switch back and forth between these. -@gdef@rawbackslash{@let\=@backslashcurfont} +% catcode other. @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of @@ -11669,7 +11556,7 @@ directory should work if nowhere else does.} @ifx\@eatinput @let\ = @ttbackslash @fi @catcode13=5 % regular end of line @enableemergencynewline - @let@c=@texinfoc + @let@c=@comment @let@parsearg@originalparsearg % Also turn back on active characters that might appear in the input % file name, in case not using a pre-dumped format. @@ -11715,7 +11602,7 @@ directory should work if nowhere else does.} @markupsetuprqdefault @c Local variables: -@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c eval: (add-hook 'before-save-hook 'time-stamp) @c page-delimiter: "^\\\\message\\|emacs-page" @c time-stamp-start: "def\\\\texinfoversion{" @c time-stamp-format: "%:y-%02m-%02d.%02H" -- cgit v1.2.3