From 8db2b2a7d3fc3e4475bc4137c11069a69a3234ec Mon Sep 17 00:00:00 2001 From: Eli Zaretskii Date: Sat, 15 Aug 2015 10:56:51 +0300 Subject: Remove files used by the old MS-Windows specific build procedure * nt/configure.bat: Remove everything except the blurb about the new build procedure. * make-dist: Remove references to makefile.w32-in in various directories, and to files in nt/ that were deleted. * etc/NEWS: Mention the fact that the files were dropped. --- nt/INSTALL.OLD | 752 ------------------ nt/config.nt | 1847 --------------------------------------------- nt/configure.bat | 954 +---------------------- nt/emacs-src.tags | 6 - nt/envadd.bat | 43 -- nt/gmake.defs | 333 -------- nt/makefile.w32-in | 465 ------------ nt/multi-install-info.bat | 40 - nt/nmake.defs | 294 -------- nt/paths.h | 66 -- 10 files changed, 3 insertions(+), 4797 deletions(-) delete mode 100644 nt/INSTALL.OLD delete mode 100644 nt/config.nt delete mode 100644 nt/emacs-src.tags delete mode 100644 nt/envadd.bat delete mode 100644 nt/gmake.defs delete mode 100644 nt/makefile.w32-in delete mode 100644 nt/multi-install-info.bat delete mode 100644 nt/nmake.defs delete mode 100644 nt/paths.h (limited to 'nt') diff --git a/nt/INSTALL.OLD b/nt/INSTALL.OLD deleted file mode 100644 index 89e87b2d89..0000000000 --- a/nt/INSTALL.OLD +++ /dev/null @@ -1,752 +0,0 @@ - Building and Installing Emacs on Windows - (from 95 to 7 and beyond) - - Copyright (C) 2001-2015 Free Software Foundation, Inc. - See the end of the file for license conditions. - -*** This method of building Emacs is no longer supported. *** - It may fail to produce a correctly working Emacs. - Do not report bugs associated with this build method. - Instead, follow the new instructions in INSTALL. - -* For the impatient - - Here are the concise instructions for configuring and building the - native Windows binary of Emacs, for those who want to skip the - complex explanations and ``just do it'': - - Do not use this recipe with Cygwin. For building on Cygwin, - use the normal installation instructions, ../INSTALL. - - Do not use these instructions with MSYS environment. For building - the native Windows binary with MinGW and MSYS, follow the - instructions in the file INSTALL in this directory. - - For building without MSYS, if you have a Cygwin or MSYS port of Bash - on your Path, you will be better off removing it from PATH. (For - details, search for "MSYS sh.exe" below.) - - 1. Change to the `nt' directory (the directory of this file): - - cd nt - - 2. Run configure.bat. - - 2a.If you use MSVC, set up the build environment by running the - SetEnv.cmd batch file from the appropriate SDK directory. (Skip - this step if you are using MinGW.) For example: - - "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x86 /Debug - - if you are going to compile a debug version, or - - "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x86 /Release - - if you are going to compile an optimized version. - - 2b.From the COMMAND.COM/CMD.EXE command prompt type: - - configure - - From a Unixy shell prompt: - - cmd /c configure.bat - or - command.com /c configure.bat - - 3. Run the Make utility suitable for your environment. If you build - with the Microsoft's Visual C compiler: - - nmake - - For the development environments based on GNU GCC (MinGW, MSYS, - Cygwin - but see notes about Cygwin make below), depending on how - Make is called, it could be: - - make - or - mingw32-make - or - gnumake - or - gmake - - (If you are building from Bazaar, say "make bootstrap" or "nmake - bootstrap" instead, and avoid using Cygwin make.) - - With GNU Make, you can use the -j command-line option to have - Make execute several commands at once, like this: - - gmake -j 2 - - (With versions of GNU Make before 3.82, you need also set the - XMFLAGS variable, like this: - - gmake -j 2 XMFLAGS="-j 2" - - The XMFLAGS variable overrides the default behavior of version - 3.82 and older of GNU Make on Windows, whereby recursive Make - invocations reset the maximum number of simultaneous commands to - 1. The above command allows up to 4 simultaneous commands at - once in the top-level Make, and up to 3 in each one of the - recursive Make's.) - - 4. Generate the Info manuals (only if you are building out of Bazaar, - and if you have makeinfo.exe installed): - - make info - - (change "make" to "nmake" if you use MSVC). - - 5. Install the produced binaries: - - make install - - That's it! - - If these short instructions somehow fail, read the rest of this - file. - -* Preliminaries - - If you want to build a Cygwin port of Emacs, use the instructions in - the INSTALL file in the main Emacs directory (the parent of this - directory). These instructions are for building a native Windows - binary of Emacs. - - If you used WinZip to unpack the distribution, we suggest to - remove the files and unpack again with a different program! - WinZip is known to create some subtle and hard to debug problems, - such as converting files to DOS CR-LF format, not creating empty - directories, etc. We suggest to use djtarnt.exe from the GNU FTP - site. For modern formats, such as .tar.xz, we suggest bsdtar.exe - from the libarchive package; its precompiled Windows binaries are - available from this site: - - http://sourceforge.net/projects/ezwinports/files/ - - In addition to this file, if you build a development snapshot, you - should also read INSTALL.REPO in the parent directory. - -* Supported development environments - - To compile Emacs, you will need either Microsoft Visual C++ 2.0, or - later and nmake, or a Windows port of GCC 2.95 or later with MinGW - and Windows API support and a port of GNU Make. You can use the Cygwin - ports of GCC, but Emacs requires the MinGW headers and libraries to - build (latest versions of the Cygwin toolkit, at least since v1.3.3, - include the MinGW headers and libraries as an integral part). - - The rest of this file assumes you have a working development - environment. If you just installed such an environment, try - building a trivial C "Hello world" program, and see if it works. If - it doesn't work, resolve that problem first! If you use Microsoft - Visual Studio .NET 2003, don't forget to run the VCVARS32.BAT batch - file from the `Bin' subdirectory of the directory where you have - installed VS.NET. With other versions of MSVC, run the SetEnv.cmd - batch file from the `Bin' subdirectory of the directory where you - have the SDK installed. - - If you use the MinGW port of GCC and GNU Make to build Emacs, there - are some compatibility issues wrt Make and the shell that is run by - Make, either the standard COMMAND.COM/CMD.EXE supplied with Windows - or sh.exe, a port of a Unixy shell. For reference, below is a list - of which builds of GNU Make are known to work or not, and whether - they work in the presence and/or absence of sh.exe, the Cygwin port - of Bash. Note that any version of Make that is compiled with Cygwin - will only work with Cygwin tools, due to the use of Cygwin style - paths. This means Cygwin Make is unsuitable for building parts of - Emacs that need to invoke Emacs itself (leim and "make bootstrap", - for example). Also see the Trouble-shooting section below if you - decide to go ahead and use Cygwin make. - - In addition, using 4NT or TCC as your shell is known to fail the - build process, at least since 4NT version 3.01. Use CMD.EXE, the - default Windows shell, instead. MSYS sh.exe also appears to cause - various problems, e.g., it is known to cause failures in commands - like "cmd /c FOO" in the Makefiles, because it thinks "/c" is a - Unix-style file name that needs conversion to the Windows format. - If you have MSYS installed, try "make SHELL=cmd.exe" to force the - use of cmd.exe instead of the MSYS sh.exe. - - sh exists no sh - - cygwin b20.1 make (3.75): fails[1, 5] fails[2, 5] - MSVC compiled gmake 3.77: okay okay - MSVC compiled gmake 3.78.1: okay okay - MSVC compiled gmake 3.79.1: okay okay - mingw32/gcc-2.92.2 make (3.77): okay okay[4] - cygwin compiled gmake 3.77: fails[1, 5] fails[2, 5] - cygwin compiled make 3.78.1: fails[5] fails[2, 5] - cygwin compiled make 3.79.1: fails[3, 5] fails[2?, 5] - cygwin compiled make 3.80: okay[6] fails?[7] - cygwin compiled make 3.81: fails fails?[7] - mingw32 compiled make 3.79.1: okay okay - mingw32 compiled make 3.80: okay okay[7] - mingw32 compiled make 3.81: okay okay[8] - - Notes: - - [1] doesn't cope with makefiles with DOS line endings, so must mount - emacs source with text!=binary. - [2] fails when needs to invoke shell commands; okay invoking gcc etc. - [3] requires LC_MESSAGES support to build; cannot build with early - versions of Cygwin. - [4] may fail on Windows 9X and Windows ME; if so, install Bash. - [5] fails when building leim due to the use of cygwin style paths. - May work if building emacs without leim. - [6] need to uncomment 3 lines in nt/gmake.defs that invoke `cygpath' - (look for "cygpath" near line 85 of gmake.defs). - [7] not recommended; please report if you try this combination. - [8] tested only on Windows XP. - - Other compilers may work, but specific reports from people that have - tried suggest that the Intel C compiler (for example) may produce an - Emacs executable with strange filename completion behavior. Unless - you would like to assist by finding and fixing the cause of any bugs - like this, we recommend the use of the supported compilers mentioned - in the previous paragraph. - - You will also need a copy of the POSIX cp, rm and mv programs. These - and other useful POSIX utilities can be obtained from one of several - projects: - - * http://gnuwin32.sourceforge.net/ ( GnuWin32 ) - * http://www.mingw.org/ ( MinGW ) - * http://www.cygwin.com/ ( Cygwin ) - * http://unxutils.sourceforge.net/ ( UnxUtils ) - - If you build Emacs on 16-bit versions of Windows (9X or ME), we - suggest to install the Cygwin port of Bash. That is because the - native Windows shell COMMAND.COM is too limited; the Emacs build - procedure tries very hard to support even such limited shells, but - as none of the Windows developers of Emacs work on Windows 9X, we - cannot guarantee that it works without a more powerful shell. - - Additional instructions and help for building Emacs on Windows can be - found at the Emacs Wiki: - - http://www.emacswiki.org/cgi-bin/wiki/WThirtyTwoInstallationKit - - and on these URLs: - - http://ourcomments.org/Emacs/w32-build-emacs.html - http://derekslager.com/blog/posts/2007/01/emacs-hack-3-compile-emacs-from-cvs-on-windows.ashx - - Both of those pages were written before Emacs switched from CVS to - Bazaar, but the parts about building Emacs still apply in Bazaar. - The second URL has instructions for building with MSVC, as well as - with MinGW, while the first URL covers only MinGW, but has more - details about it. - -* Configuring - - Configuration of Emacs is now handled by running configure.bat in the - `nt' subdirectory. It will detect which compiler you have available, - and generate makefiles accordingly. You can override the compiler - detection, and control optimization and debug settings, by specifying - options on the command line when invoking configure. - - To configure Emacs to build with GCC or MSVC, whichever is available, - simply change to the `nt' subdirectory and run `configure.bat' with no - options. To see what options are available, run `configure --help'. - Do NOT use the --no-debug option to configure.bat unless you are - absolutely sure the produced binaries will never need to be run under - a debugger. - - Because of limitations of the stock Windows command shells, special - care is needed to pass some characters in the arguments of the - --cflags and --ldflags options. Backslashes should not be used in - file names passed to the compiler and linker via these options. Use - forward slashes instead. If the arguments to these two options - include the `=' character, like when passing a -DFOO=bar preprocessor - option, the argument with the `=' character should be enclosed in - quotes, like this: - - configure --cflags "-DFOO=bar" - - Support for options that include the `=' character require "command - extensions" to be enabled. (They are enabled by default, but your - system administrator could have changed that. See "cmd /?" for - details.) If command extensions are disabled, a warning message might - be displayed informing you that "using parameters that include the = - character by enclosing them in quotes will not be supported." - - You may also use the --cflags and --ldflags options to pass - additional parameters to the compiler and linker, respectively; they - are frequently used to pass -I and -L flags to specify supplementary - include and library directories. If a directory name includes - spaces, you will need to enclose it in quotes, as follows - -I"C:/Program Files/GnuTLS-2.10.1/include". Note that only the - directory name is enclosed in quotes, not the entire argument. Also - note that this functionality is only supported if command extensions - are available. If command extensions are disabled and you attempt to - use this functionality you may see the following warning message - "Error in --cflags argument: ... Backslashes and quotes cannot be - used with --cflags. Please use forward slashes for filenames and - paths (e.g. when passing directories to -I)." - - N.B. It is normal to see a few error messages output while configure - is running, when gcc support is being tested. These cannot be - suppressed because of limitations in the Windows 9X command.com shell. - - You are encouraged to look at the file config.log which shows details - for failed tests, after configure.bat finishes. Any unexplained failure - should be investigated and perhaps reported as a bug (see the section - about reporting bugs in the file README in this directory and in the - Emacs manual). - -* Optional image library support - - In addition to its "native" image formats (pbm and xbm), Emacs can - handle other image types: xpm, tiff, gif, png, jpeg and experimental - support for svg. - - To build Emacs with support for them, the corresponding headers must - be in the include path when the configure script is run. This can - be setup using environment variables, or by specifying --cflags - -I... options on the command-line to configure.bat. The configure - script will report whether it was able to detect the headers. If - the results of this testing appear to be incorrect, please look for - details in the file config.log: it will show the failed test - programs and compiler error messages that should explain what is - wrong. (Usually, any such failures happen because some headers are - missing due to bad packaging of the image support libraries.) - - Note that any file path passed to the compiler or linker must use - forward slashes; using backslashes will cause compiler warnings or - errors about unrecognized escape sequences. - - To use the external image support, the DLLs implementing the - functionality must be found when Emacs first needs them, either on the - PATH, or in the same directory as emacs.exe. Failure to find a - library is not an error; the associated image format will simply be - unavailable. Note that once Emacs has determined that a library can - not be found, there's no way to force it to try again, other than - restarting. See the variable `dynamic-library-alist' to configure the - expected names of the libraries. - - Some image libraries have dependencies on one another, or on zlib. - For example, tiff support depends on the jpeg library. If you did not - compile the libraries yourself, you must make sure that any dependency - is in the PATH or otherwise accessible and that the binaries are - compatible (for example, that they were built with the same compiler). - - Binaries for the image libraries (among many others) can be found at - the GnuWin32 project. PNG, JPEG and TIFF libraries are also - included with GTK, which is installed along with other Free Software - that requires it. These are built with MinGW, but they can be used - with both GCC/MinGW and MSVC builds of Emacs. See the info on - http://ourcomments.org/Emacs/w32-build-emacs.html, under "How to Get - Images Support", for more details about installing image support - libraries. Note specifically that, due to some packaging snafus in - the GnuWin32-supplied image libraries, you will need to download - _source_ packages for some of the libraries in order to get the - header files necessary for building Emacs with image support. - - If GTK 2.0 is installed, addpm will arrange for its image libraries - to be on the DLL search path for Emacs. - - For PNG images, we recommend to use versions 1.4.x and later of - libpng, because previous versions had security issues. You can find - precompiled libraries and headers on the GTK download page for - Windows (http://www.gtk.org/download/win32.php). - - Versions 1.4.0 and later of libpng are binary incompatible with - earlier versions, so Emacs will only look for libpng libraries which - are compatible with the version it was compiled against. That - version is given by the value of the Lisp variable `libpng-version'; - e.g., 10403 means version 1.4.3. The variable `dynamic-library-alist' - is automatically set to name only those DLL names that are known to - be compatible with the version given by `libpng-version'. If PNG - support does not work for you even though you have the support DLL - installed, check the name of the installed DLL against - `dynamic-library-alist' and the value of `libpng-version', and - download compatible DLLs if needed. - -* Optional GnuTLS support - - If configure.bat finds the gnutls/gnutls.h file in the include path, - Emacs is built with GnuTLS support by default; to avoid that you can - pass the argument --without-gnutls. - - In order to support GnuTLS at runtime, a GnuTLS-enabled Emacs must - be able to find the relevant DLLs during startup; failure to do so - is not an error, but GnuTLS won't be available to the running - session. - - You can get pre-built binaries (including any required DLL and the - header files) at http://sourceforge.net/projects/ezwinports/files/. - -* Optional libxml2 support - - If configure.bat finds the libxml/HTMLparser.h file in the include path, - Emacs is built with libxml2 support by default; to avoid that you can - pass the argument --without-libxml2. - - In order to support libxml2 at runtime, a libxml2-enabled Emacs must - be able to find the relevant DLLs during startup; failure to do so - is not an error, but libxml2 features won't be available to the - running session. - - One place where you can get pre-built Windows binaries of libxml2 - (including any required DLL and the header files) is here: - - http://sourceforge.net/projects/ezwinports/files/ - - To compile Emacs with libxml2 from that site, you will need to pass - the "--cflags -I/path/to/include/libxml2" option to configure.bat, - because libxml2 header files are installed in the include/libxml2 - subdirectory of the directory where you unzip the binary - distribution. Other binary distributions might use other - directories, although include/libxml2 is the canonical place where - libxml2 headers are installed on Posix platforms. - - You will also need to install the libiconv "development" tarball, - because the libiconv headers need to be available to the compiler - when you compile with libxml2 support. A MinGW port of libiconv can - be found on the MinGW site: - - http://sourceforge.net/projects/mingw/files/MinGW/Base/libiconv/ - - You need the libiconv-X.Y.Z-N-mingw32-dev.tar.lzma tarball from that - site. - -* Experimental SVG support - - SVG support is currently experimental, and not built by default. - Specify --with-svg and ensure you have all the dependencies in your - include path. Unless you have built a minimalist librsvg yourself - (untested), librsvg depends on a significant chunk of GTK+ to build, - plus a few Gnome libraries, libxml2, libbz2 and zlib at runtime. The - easiest way to obtain the dependencies required for building is to - download a pre-bundled GTK+ development environment for Windows. - GTK puts its header files all over the place, so you will need to - run pkgconfig to list the include path you will need (either passed - to configure.bat as --cflags options, or set in the environment). - - To use librsvg at runtime, ensure that librsvg and its dependencies - are on your PATH. If you didn't build librsvg yourself, you will - need to check with where you downloaded it from for the - dependencies, as there are different build options. If it is a - short list, then it most likely only lists the immediate - dependencies of librsvg, but the dependencies themselves have - dependencies - so don't download individual libraries from GTK+, - download and install the whole thing. If you think you've got all - the dependencies and SVG support is still not working, check your - PATH for other libraries that shadow the ones you downloaded. - Libraries of the same name from different sources may not be - compatible, this problem was encountered with libbzip2 from GnuWin32 - with libcroco from gnome.org. - - If you can see etc/images/splash.svg, then you have managed to get - SVG support working. Congratulations for making it through DLL hell - to this point. You'll probably find that some SVG images crash - Emacs. Problems have been observed in some images that contain - text, they seem to be a problem in the Windows port of Pango, or - maybe a problem with the way Cairo or librsvg is using it that - doesn't show up on other platforms. - -* Optional extra runtime checks - - The configure.bat option --enable-checking builds Emacs with some - optional extra runtime checks and assertions enabled. This may be - useful for debugging. - -* Optional extra libraries - - You can pass --lib LIBNAME option to configure.bat to cause Emacs to - link with the specified library. You can use this option more than once. - -* Building - - After running configure, simply run the appropriate `make' program for - your compiler to build Emacs. For MSVC, this is nmake; for GCC, it is - GNU make. (If you are building out of Bazaar, say "make bootstrap" or - "nmake bootstrap" instead.) - - As the files are compiled, you will see some warning messages - declaring that some functions don't return a value, or that some data - conversions will be lossy, etc. You can safely ignore these messages. - The warnings may be fixed in the main FSF source at some point, but - until then we will just live with them. - - With GNU Make, you can use the -j command-line option to have Make - execute several commands at once, like this: - - gmake -j 4 XMFLAGS="-j 3" - - The XMFLAGS variable overrides the default behavior of GNU Make on - Windows, whereby recursive Make invocations reset the maximum number - of simultaneous commands to 1. The above command allows up to 4 - simultaneous commands at once in the top-level Make, and up to 3 in - each one of the recursive Make's; you can use other numbers of jobs, - if you wish. - - If you are building from Bazaar, the following commands will produce - the Info manuals (which are not part of the Bazaar sources): - - make info - or - nmake info - - Note that you will need makeinfo.exe (from the GNU Texinfo package) - in order for this command to succeed. - -* Installing - - To install Emacs after it has compiled, simply run `nmake install' - or `make install', depending on which version of the Make utility - do you have. - - By default, Emacs will be installed in the location where it was - built, but a different location can be specified either using the - --prefix option to configure, or by setting INSTALL_DIR when running - make, like so: - - make install INSTALL_DIR=D:/emacs - - (for `nmake', type "nmake install INSTALL_DIR=D:/emacs" instead). - - The install process will run addpm to setup the registry entries, and - to create a Start menu icon for Emacs. - -* Make targets - - The following make targets may be used by users building the source - distribution, or users who have checked out of Bazaar after - an initial bootstrapping. - - make - Builds Emacs from the available sources and pre-compiled lisp files. - - make install - Installs programs to the bin directory, and runs addpm to create - Start Menu icons. - - make clean - Removes object and executable files produced by the build process in - the current configuration. After make clean, you can rebuild with - the same configuration using make. - - make distclean - In addition to the files removed by make clean, this also removes - Makefiles and other generated files to get back to the state of a - freshly unpacked source distribution. Note that this will not remove - installed files, or the results of builds performed with different - compiler or optimization options than the current configuration. - After make distclean, it is necessary to run configure.bat followed - by make to rebuild. - - make cleanall - Removes object and executable files that may have been created by - previous builds with different configure options, in addition to - the files produced by the current configuration. - - make realclean - Removes the installed files in the bin subdirectory in addition to - the files removed by make cleanall. - - make dist - Builds Emacs from the available sources and pre-compiled lisp files. - Packages Emacs binaries as full distribution and barebin distribution. - - The following targets are intended only for use with the Bazaar sources. - - make bootstrap - Creates a temporary emacs binary with lisp source files and - uses it to compile the lisp files. Once the lisp files are built, - emacs is redumped with the compiled lisp. - - make recompile - Recompiles any changed lisp files after an update. This saves - doing a full bootstrap after every update. If this or a subsequent - make fail, you probably need to perform a full bootstrap, though - running this target multiple times may eventually sort out the - interdependencies. - - make maintainer-clean - Removes everything that can be recreated, including compiled lisp - files, to get back to the state of a fresh Bazaar tree. After make - maintainer-clean, it is necessary to run configure.bat and make - bootstrap to rebuild. Occasionally it may be necessary to run this - target after an update. - -* Creating binary distributions - - Binary distributions (full and barebin distributions) can be - automatically built and packaged from source tarballs or a repository - checkout. - - When building Emacs binary distributions, the --distfiles argument - to configure.bat specifies files to be included in the bin directory - of the binary distributions. This is intended for libraries that are - not built as part of Emacs, e.g. image libraries. - - For example, specifying - - --distfiles D:\distfiles\libXpm.dll - - results in libXpm.dll being copied from D:\distfiles to the - bin directory before packaging starts. - - Multiple files can be specified using multiple --distfiles arguments: - - --distfiles D:\distfiles\libXpm.dll --distfiles C:\jpeglib\jpeg.dll - - For packaging the binary distributions, the 'dist' make target uses - 7-Zip (http://www.7-zip.org), which must be installed and available - on the Windows Path. - - -* Trouble-shooting - - The main problems that are likely to be encountered when building - Emacs stem from using an old version of GCC, or old MinGW or Windows API - headers. Additionally, Cygwin ports of GNU make may require the Emacs - source tree to be mounted with text!=binary, because the makefiles - generated by configure.bat necessarily use DOS line endings. Also, - Cygwin ports of make must run in UNIX mode, either by specifying - --unix on the command line, or MAKE_MODE=UNIX in the environment. - - When configure runs, it attempts to detect when GCC itself, or the - headers it is using, are not suitable for building Emacs. GCC version - 2.95 or later is needed, because that is when the Windows port gained - sufficient support for anonymous structs and unions to cope with some - definitions from winnt.h that are used by addsection.c. - Older versions of the Windows API headers that come with Cygwin and MinGW - may be missing some definitions required by Emacs, or broken in other - ways. In particular, uniscribe APIs were added to MinGW CVS only on - 2006-03-26, so releases from before then cannot be used. - - When in doubt about correctness of what configure did, look at the file - config.log, which shows all the failed test programs and compiler - messages associated with the failures. If that doesn't give a clue, - please report the problems, together with the relevant fragments from - config.log, as bugs. - - If configure succeeds, but make fails, install the Cygwin port of - Bash, even if the table above indicates that Emacs should be able to - build without sh.exe. (Some versions of Windows shells are too dumb - for Makefile's used by Emacs.) - - If you are using certain Cygwin builds of GCC, such as Cygwin version - 1.1.8, you may need to specify some extra compiler flags like so: - - configure --with-gcc --cflags -mwin32 --cflags -D__MSVCRT__ - --ldflags -mwin32 - - However, the latest Cygwin versions, such as 1.3.3, don't need those - switches; you can simply use "configure --with-gcc". - - We will attempt to auto-detect the need for these flags in a future - release. - -* Debugging - - You should be able to debug Emacs using the debugger that is - appropriate for the compiler you used, namely DevStudio or Windbg if - compiled with MSVC, or GDB if compiled with GCC. (GDB for Windows - is available from the MinGW site, http://www.mingw.org/download.shtml.) - - When Emacs aborts due to a fatal internal error, Emacs on Windows - pops up an Emacs Abort Dialog asking you whether you want to debug - Emacs or terminate it. If Emacs was built with MSVC, click YES - twice, and Windbg or the DevStudio debugger will start up - automatically. If Emacs was built with GCC, first start GDB and - attach it to the Emacs process with the "gdb -p EMACS-PID" command, - where EMACS-PID is the Emacs process ID (which you can see in the - Windows Task Manager), type the "continue" command inside GDB, and - only then click YES on the abort dialog. This will pass control to - the debugger, and you will be able to debug the cause of the fatal - error. - - The single most important thing to find out when Emacs aborts or - crashes is where did that happen in the Emacs code. This is called - "backtrace". - - Emacs on Windows uses more than one thread. When Emacs aborts due - to a fatal error, the current thread may not be the application - thread running Emacs code. Therefore, to produce a meaningful - backtrace from a debugger, you need to instruct it to show the - backtrace for every thread. With GDB, you do it like this: - - (gdb) thread apply all backtrace - - To run Emacs under a debugger to begin with, simply start it from - the debugger. With GDB, chdir to the `src' directory (if you have - the source tree) or to a directory with the `.gdbinit' file (if you - don't have the source tree), and type these commands: - - C:\whatever\src> gdb x:\path\to\emacs.exe - (gdb) run - - Thereafter, use Emacs as usual; you can minimize the debugger - window, if you like. The debugger will take control if and when - Emacs crashes. - - Emacs functions implemented in C use a naming convention that reflects - their names in lisp. The names of the C routines are the lisp names - prefixed with 'F', and with dashes converted to underscores. For - example, the function call-process is implemented in C by - Fcall_process. Similarly, lisp variables are prefixed with 'V', again - with dashes converted to underscores. These conventions enable you to - easily set breakpoints or examine familiar lisp variables by name. - - Since Emacs data is often in the form of a lisp object, and the - Lisp_Object type is difficult to examine manually in a debugger, - Emacs provides a helper routine called debug_print that prints out a - readable representation of a Lisp_Object. If you are using GDB, - there is a .gdbinit file in the src directory which provides - definitions that are useful for examining lisp objects. Therefore, - the following tips are mainly of interest when using MSVC. - - The output from debug_print is sent to stderr, and to the debugger - via the OutputDebugString routine. The output sent to stderr should - be displayed in the console window that was opened when the - emacs.exe executable was started. The output sent to the debugger - should be displayed in its "Debug" output window. - - When you are in the process of debugging Emacs and you would like to - examine the contents of a Lisp_Object variable, pop up the QuickWatch - window (QuickWatch has an eyeglass symbol on its button in the - toolbar). In the text field at the top of the window, enter - debug_print() and hit return. For example, start and run - Emacs in the debugger until it is waiting for user input. Then click - on the Break button in the debugger to halt execution. Emacs should - halt in ZwUserGetMessage waiting for an input event. Use the Call - Stack window to select the procedure w32_msp_pump up the call stack - (see below for why you have to do this). Open the QuickWatch window - and enter debug_print(Vexec_path). Evaluating this expression will - then print out the contents of the lisp variable exec-path. - - If QuickWatch reports that the symbol is unknown, then check the call - stack in the Call Stack window. If the selected frame in the call - stack is not an Emacs procedure, then the debugger won't recognize - Emacs symbols. Instead, select a frame that is inside an Emacs - procedure and try using debug_print again. - - If QuickWatch invokes debug_print but nothing happens, then check the - thread that is selected in the debugger. If the selected thread is - not the last thread to run (the "current" thread), then it cannot be - used to execute debug_print. Use the Debug menu to select the current - thread and try using debug_print again. Note that the debugger halts - execution (e.g., due to a breakpoint) in the context of the current - thread, so this should only be a problem if you've explicitly switched - threads. - - -This file is part of GNU Emacs. - -GNU Emacs is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 3 of the License, or -(at your option) any later version. - -GNU Emacs is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU Emacs. If not, see . diff --git a/nt/config.nt b/nt/config.nt deleted file mode 100644 index aa4a8bc8cf..0000000000 --- a/nt/config.nt +++ /dev/null @@ -1,1847 +0,0 @@ -/* GNU Emacs site configuration template file. - -Copyright (C) 1988, 1993-1994, 2001-2015 Free Software Foundation, Inc. - -This file is part of GNU Emacs. - -GNU Emacs is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 3 of the License, or -(at your option) any later version. - -GNU Emacs is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU Emacs. If not, see . */ - -/* NOTE: - *** WARNING This file is no longer being updated *** - Please do not remove non-Windows related stuff - unless strictly necessary. Also, before adding anything here - consider whether inc/ms-w32.h would be a better place; this is - particularly true for gcc vs. MSVC conditional defines, MinGW or - MSVC specific code, and macros not already defined in config.in. */ - -/* No code in Emacs #includes config.h twice, but some bits of code - intended to work with other packages as well (like gmalloc.c) - think they can include it as many times as they like. */ -#ifndef EMACS_CONFIG_H -#define EMACS_CONFIG_H - - -/* Define if building universal (internal helper macro) */ -#undef AC_APPLE_UNIVERSAL_BUILD - -/* Define to use the convention that & in the full name stands for the login - id. */ -#undef AMPERSAND_FULL_NAME - -/* Define to the number of bits in type 'ptrdiff_t'. */ -#undef BITSIZEOF_PTRDIFF_T - -/* Define to the number of bits in type 'sig_atomic_t'. */ -#undef BITSIZEOF_SIG_ATOMIC_T - -/* Define to the number of bits in type 'size_t'. */ -#undef BITSIZEOF_SIZE_T - -/* Define to the number of bits in type 'wchar_t'. */ -#undef BITSIZEOF_WCHAR_T - -/* Define to the number of bits in type 'wint_t'. */ -#undef BITSIZEOF_WINT_T - -/* Define if get_current_dir_name should not be used. */ -#undef BROKEN_GET_CURRENT_DIR_NAME - -/* Define on FreeBSD to work around an issue when reading from a PTY. */ -#undef BROKEN_PTY_READ_AFTER_EAGAIN - -/* Define if Emacs cannot be dumped on your system. */ -#undef CANNOT_DUMP - -/* Define this to enable compile time checks for the Lisp_Object data type. */ -/* #undef CHECK_LISP_OBJECT_TYPE */ - -/* Define if you want lock files to be written, so that Emacs can tell - instantly when you try to modify a file that someone else has modified in - his/her Emacs. */ -#define CLASH_DETECTION 1 - -/* Short copyright string for this version of Emacs. */ -#define COPYRIGHT "Copyright (C) 2015 Free Software Foundation, Inc." - -/* Define to one of '_getb67', 'GETB67', 'getb67' for Cray-2 and Cray-YMP - systems. This function is required for 'alloca.c' support on those systems. - */ -#undef CRAY_STACKSEG_END - -/* Define if the system is Cygwin. */ -#undef CYGWIN - -/* Define to 1 if using 'alloca.c'. */ -#undef C_ALLOCA - -/* Define if the system is Darwin. */ -#undef DARWIN_OS - -/* Extra bits to be or'd in with any pointers stored in a Lisp_Object. */ -#undef DATA_SEG_BITS - -/* Name of the default sound device. */ -#undef DEFAULT_SOUND_DEVICE - -/* Character that separates a device in a file name. */ -#define DEVICE_SEP ':' - -/* Define to 1 for DGUX with . */ -#undef DGUX - -/* Character that separates directories in a file name. */ -#define DIRECTORY_SEP '/' - -/* Define if process.c does not need to close a pty to make it a controlling - terminal (it is already a controlling terminal of the subprocess, because - we did ioctl TIOCSCTTY). */ -#undef DONT_REOPEN_PTY - -/* Define if the system is MS DOS or MS Windows. */ -#define DOS_NT - -/* Define to 1 if you are using the GNU C Library. */ -#undef DOUG_LEA_MALLOC - -/* Define to the canonical Emacs configuration name. */ -#undef EMACS_CONFIGURATION - -/* Define to the options passed to configure. */ -#undef EMACS_CONFIG_OPTIONS - -/* Define to 1 if expensive run-time data type and consistency checks are - enabled. */ -#undef ENABLE_CHECKING - -/* Letter to use in finding device name of first PTY, if PTYs are supported. - */ -#define FIRST_PTY_LETTER 'a' - -/* Enable compile-time and run-time bounds-checking, and some warnings, - without upsetting glibc 2.15+. */ - #if !defined _FORTIFY_SOURCE && defined __OPTIMIZE__ && __OPTIMIZE__ - # define _FORTIFY_SOURCE 2 - #endif - - -/* Define to 1 if futimesat mishandles a NULL file name. */ -#undef FUTIMESAT_NULL_BUG - -/* Define this to check for errors in cons list. */ -#undef GC_CHECK_CONS_LIST - -/* Define this temporarily to hunt a bug. If defined, the size of strings is - redundantly recorded in sdata structures so that it can be compared to the - sizes recorded in Lisp strings. */ -#undef GC_CHECK_STRING_BYTES - -/* Define this to check the string free list. */ -#undef GC_CHECK_STRING_FREE_LIST - -/* Define this to check for short string overrun. */ -#undef GC_CHECK_STRING_OVERRUN - -/* Mark a secondary stack, like the register stack on the ia64. */ -#undef GC_MARK_SECONDARY_STACK - -/* Define if setjmp is known to save all registers relevant for conservative - garbage collection in the jmp_buf. - MSVC ignores the "register" keyword, so test fails even though - setjmp does work. */ -#define GC_SETJMP_WORKS 1 - -/* Define to the type of elements in the array set by `getgroups'. Usually - this is either `int' or `gid_t'. */ -#undef GETGROUPS_T - -/* Define this to 1 if getgroups(0,NULL) does not return the number of groups. - */ -#undef GETGROUPS_ZERO_BUG - -/* Define if gettimeofday clobbers the localtime buffer. */ -#undef GETTIMEOFDAY_CLOBBERS_LOCALTIME - -/* Define this to 'void' or 'struct timezone' to match the system's - declaration of the second argument to gettimeofday. */ -#undef GETTIMEOFDAY_TIMEZONE - -/* Define this to enable glyphs debugging code. */ -/* #undef GLYPH_DEBUG */ - -/* Define to a C preprocessor expression that evaluates to 1 or 0, depending - whether the gnulib module close-stream shall be considered present. */ -#undef GNULIB_CLOSE_STREAM - -/* Define to a C preprocessor expression that evaluates to 1 or 0, depending - whether the gnulib module faccessat shall be considered present. */ -#undef GNULIB_FACCESSAT - -/* Define to a C preprocessor expression that evaluates to 1 or 0, depending - whether the gnulib module fdopendir shall be considered present. */ -#undef GNULIB_FDOPENDIR - -/* Define to a C preprocessor expression that evaluates to 1 or 0, depending - whether the gnulib module fscanf shall be considered present. */ -#undef GNULIB_FSCANF - -/* enable some gnulib portability checks */ -#undef GNULIB_PORTCHECK - -/* Define to a C preprocessor expression that evaluates to 1 or 0, depending - whether the gnulib module scanf shall be considered present. */ -#undef GNULIB_SCANF - -/* Define if ths system is compatible with GNU/Linux. */ -#undef GNU_LINUX - -/* Define to 1 if you want to use the GNU memory allocator. */ -#define GNU_MALLOC 1 - -/* Define to set the G_SLICE environment variable to "always-malloc" at - startup, if using GTK. */ -#undef G_SLICE_ALWAYS_MALLOC - -/* Define to 1 if you have the `access' function. */ -#undef HAVE_ACCESS - -/* Define to 1 if you have the `aclsort' function. */ -#undef HAVE_ACLSORT - -/* Define to 1 if you have the header file. */ -#undef HAVE_ACLV_H - -/* Define to 1 if you have the `aclx_get' function. */ -#undef HAVE_ACLX_GET - -/* Define to 1 if you have the `acl_copy_ext_native' function. */ -#undef HAVE_ACL_COPY_EXT_NATIVE - -/* Define to 1 if you have the `acl_create_entry_np' function. */ -#undef HAVE_ACL_CREATE_ENTRY_NP - -/* Define to 1 if you have the `acl_delete_def_file' function. */ -#undef HAVE_ACL_DELETE_DEF_FILE - -/* Define to 1 if you have the `acl_delete_fd_np' function. */ -#undef HAVE_ACL_DELETE_FD_NP - -/* Define to 1 if you have the `acl_delete_file_np' function. */ -#undef HAVE_ACL_DELETE_FILE_NP - -/* Define to 1 if you have the `acl_entries' function. */ -#undef HAVE_ACL_ENTRIES - -/* Define to 1 if you have the `acl_extended_file' function. */ -#undef HAVE_ACL_EXTENDED_FILE - -/* Define to 1 if the constant ACL_FIRST_ENTRY exists. */ -#undef HAVE_ACL_FIRST_ENTRY - -/* Define to 1 if you have the `acl_free' function. */ -#define HAVE_ACL_FREE 1 - -/* Define to 1 if you have the `acl_free_text' function. */ -#undef HAVE_ACL_FREE_TEXT - -/* Define to 1 if you have the `acl_from_mode' function. */ -#undef HAVE_ACL_FROM_MODE - -/* Define to 1 if you have the `acl_from_text' function. */ -#define HAVE_ACL_FROM_TEXT 1 - -/* Define to 1 if you have the `acl_get_fd' function. */ -#undef HAVE_ACL_GET_FD - -/* Define to 1 if you have the `acl_get_file' function. */ -#define HAVE_ACL_GET_FILE 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_ACL_LIBACL_H - -/* Define to 1 if you have the `acl_set_fd' function. */ -#undef HAVE_ACL_SET_FD - -/* Define to 1 if you have the `acl_set_file' function. */ -#define HAVE_ACL_SET_FILE 1 - -/* Define to 1 if you have the `acl_to_short_text' function. */ -#undef HAVE_ACL_TO_SHORT_TEXT - -/* Define to 1 if you have the `acl_trivial' function. */ -#undef HAVE_ACL_TRIVIAL - -/* Define to 1 if the ACL type ACL_TYPE_EXTENDED exists. */ -#undef HAVE_ACL_TYPE_EXTENDED - -/* Define to 1 if the file /usr/lpp/X11/bin/smt.exp exists. */ -#undef HAVE_AIX_SMT_EXP - -/* Define to 1 if you have 'alloca' after including , a header that - may be supplied by this distribution. */ -#undef HAVE_ALLOCA - -/* Define to 1 if you have and it should be used (not on Ultrix). - */ -#undef HAVE_ALLOCA_H - -/* Define to 1 if ALSA is available. */ -#undef HAVE_ALSA - -/* Define to 1 if strtold conforms to C99. */ -#undef HAVE_C99_STRTOLD - -/* Define to 1 if you have the `cfmakeraw' function. */ -#undef HAVE_CFMAKERAW - -/* Define to 1 if you have the `cfsetspeed' function. */ -#undef HAVE_CFSETSPEED - -/* Define to 1 if you have the `clock_gettime' function. */ -#undef HAVE_CLOCK_GETTIME - -/* Define to 1 if you have the `clock_settime' function. */ -#undef HAVE_CLOCK_SETTIME - -/* Define to 1 if you have the header file. */ -#undef HAVE_COFF_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_COM_ERR_H - -/* Define to 1 if you have the `copysign' function. */ -#define HAVE_COPYSIGN 1 - -/* Define to 1 if data_start is the address of the start of the main data - segment. */ -#undef HAVE_DATA_START - -/* Define to 1 if using D-Bus. */ -#undef HAVE_DBUS - -/* Define to 1 if you have the `dbus_type_is_valid' function. */ -#undef HAVE_DBUS_TYPE_IS_VALID - -/* Define to 1 if you have the `dbus_validate_bus_name' function. */ -#undef HAVE_DBUS_VALIDATE_BUS_NAME - -/* Define to 1 if you have the `dbus_validate_interface' function. */ -#undef HAVE_DBUS_VALIDATE_INTERFACE - -/* Define to 1 if you have the `dbus_validate_member' function. */ -#undef HAVE_DBUS_VALIDATE_MEMBER - -/* Define to 1 if you have the `dbus_validate_path' function. */ -#undef HAVE_DBUS_VALIDATE_PATH - -/* Define to 1 if you have the `dbus_watch_get_unix_fd' function. */ -#undef HAVE_DBUS_WATCH_GET_UNIX_FD - -/* Define to 1 if you have the declaration of `alarm', and to 0 if you don't. - */ -#undef HAVE_DECL_ALARM - -/* Define to 1 if you have the declaration of `fdatasync', and to 0 if you - don't. */ -#undef HAVE_DECL_FDATASYNC - -/* Define to 1 if you have the declaration of `fdopendir', and to 0 if you - don't. */ -#undef HAVE_DECL_FDOPENDIR - -/* Define to 1 if you have the declaration of `getenv', and to 0 if you don't. - */ -#define HAVE_DECL_GETENV 1 - -/* Define to 1 if you have the declaration of `localtime_r', and to 0 if you - don't. */ -#undef HAVE_DECL_LOCALTIME_R - -/* Define to 1 if you have the declaration of `memrchr', and to 0 if you - don't. */ -#undef HAVE_DECL_MEMRCHR - -/* Define to 1 if you have the declaration of `strmode', and to 0 if you - don't. */ -#undef HAVE_DECL_STRMODE - -/* Define to 1 if you have the declaration of `strtoimax', and to 0 if you - don't. */ -#undef HAVE_DECL_STRTOIMAX - -/* Define to 1 if you have the declaration of `strtoll', and to 0 if you - don't. */ -#define HAVE_DECL_STRTOLL 1 - -/* Define to 1 if you have the declaration of `strtoull', and to 0 if you - don't. */ -#define HAVE_DECL_STRTOULL 1 - -/* Define to 1 if you have the declaration of `strtoumax', and to 0 if you - don't. */ -#define HAVE_DECL_STRTOUMAX 1 - -/* Define to 1 if you have the declaration of `sys_siglist', and to 0 if you - don't. */ -#undef HAVE_DECL_SYS_SIGLIST - -/* Define to 1 if you have the declaration of `tzname', and to 0 if you don't. - */ -#define HAVE_DECL_TZNAME 1 - -/* Define to 1 if you have the declaration of `unsetenv', and to 0 if you - don't. */ -#undef HAVE_DECL_UNSETENV - -/* Define to 1 if you have the declaration of `_putenv', and to 0 if you - don't. */ -#undef HAVE_DECL__PUTENV - -/* Define to 1 if you have the declaration of `__fpending', and to 0 if you - don't. */ -#undef HAVE_DECL___FPENDING - -/* Define to 1 if you have the declaration of `__sys_siglist', and to 0 if you - don't. */ -#undef HAVE_DECL___SYS_SIGLIST - -/* Define to 1 if you have the header file. */ -#undef HAVE_DES_H - -/* Define to 1 if dynamic ptys are supported. */ -#undef HAVE_DEV_PTMX - -/* Define to 1 if you have the `difftime' function. */ -#undef HAVE_DIFFTIME - -/* Define to 1 if you have the header file. */ -#undef HAVE_DIRENT_H - -/* Define to 1 if you have the 'dup2' function. */ -#define HAVE_DUP2 1 - -/* Define to 1 if you have the `eaccess' function. */ -#undef HAVE_EACCESS - -/* Define to 1 if you have the `endgrent' function. */ -#undef HAVE_ENDGRENT - -/* Define to 1 if you have the `endpwent' function. */ -#undef HAVE_ENDPWENT - -/* Define if you have the declaration of environ. */ -#undef HAVE_ENVIRON_DECL - -/* Define to 1 if you have the `euidaccess' function. */ -#undef HAVE_EUIDACCESS - -/* Define to 1 if you have the header file. */ -#define HAVE_EXECINFO_H 1 - -/* Define to 1 if you have the `faccessat' function. */ -#undef HAVE_FACCESSAT - -/* Define to 1 if you have the `facl' function. */ -#undef HAVE_FACL - -/* Define to 1 if you have the `fdatasync' function. */ -#undef HAVE_FDATASYNC - -/* Define to 1 if you have the `fdopendir' function. */ -#undef HAVE_FDOPENDIR - -/* Define to 1 if you have the `fork' function. */ -#undef HAVE_FORK - -/* Define to 1 if you have the `freeifaddrs' function. */ -#undef HAVE_FREEIFADDRS - -/* Define to 1 if using the freetype and fontconfig libraries. */ -#undef HAVE_FREETYPE - -/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */ -#undef HAVE_FSEEKO - -/* Define to 1 if you have the `fstatat' function. */ -#undef HAVE_FSTATAT - -/* Define to 1 if you have the `fsync' function. */ -#define HAVE_FSYNC 1 - -/* Define to 1 if you have the `futimens' function. */ -#undef HAVE_FUTIMENS - -/* Define to 1 if you have the `futimes' function. */ -#undef HAVE_FUTIMES - -/* Define to 1 if you have the `futimesat' function. */ -#undef HAVE_FUTIMESAT - -/* Define to 1 if you have the `gai_strerror' function. */ -#undef HAVE_GAI_STRERROR - -/* Define to 1 if using GConf. */ -#undef HAVE_GCONF - -/* Define to 1 if you have the `getacl' function. */ -#undef HAVE_GETACL - -/* Define to 1 if you have the `getaddrinfo' function. */ -#undef HAVE_GETADDRINFO - -/* Define to 1 if you have the `getdelim' function. */ -#undef HAVE_GETDELIM - -/* Define to 1 if you have the `getgrent' function. */ -#undef HAVE_GETGRENT - -/* Define to 1 if your system has a working `getgroups' function. */ -#undef HAVE_GETGROUPS - -/* Define to 1 if you have the `gethostname' function. */ -#define HAVE_GETHOSTNAME 1 - -/* Define to 1 if you have the `getifaddrs' function. */ -#undef HAVE_GETIFADDRS - -/* Define to 1 if you have the `getline' function. */ -#undef HAVE_GETLINE - -/* Define to 1 if you have the header file. */ -#undef HAVE_GETOPT_H - -/* Define to 1 if you have the `getopt_long_only' function. */ -#undef HAVE_GETOPT_LONG_ONLY - -/* Define to 1 if you have the `getpagesize' function. */ -#define HAVE_GETPAGESIZE 1 - -/* Define to 1 if you have the `getpeername' function. */ -#define HAVE_GETPEERNAME 1 - -/* Define to 1 if you have the `getpt' function. */ -#undef HAVE_GETPT - -/* Define to 1 if you have the `getpwent' function. */ -#undef HAVE_GETPWENT - -/* Define to 1 if you have the `getrlimit' function. */ -#undef HAVE_GETRLIMIT - -/* Define to 1 if you have the `getrusage' function. */ -#undef HAVE_GETRUSAGE - -/* Define to 1 if you have the `getsockname' function. */ -#define HAVE_GETSOCKNAME 1 - -/* Define to 1 if you have the `gettimeofday' function. */ -#define HAVE_GETTIMEOFDAY 1 - -/* Define to 1 if using GFile. */ -#undef HAVE_GFILENOTIFY - -/* Define to 1 if you have the `get_current_dir_name' function. */ -#undef HAVE_GET_CURRENT_DIR_NAME - -/* Define to 1 if you have a gif (or ungif) library. */ -#undef HAVE_GIF - -/* Define if using GnuTLS. */ -#undef HAVE_GNUTLS - -/* Define if using GnuTLS certificate verification callbacks. */ -#undef HAVE_GNUTLS_CALLBACK_CERTIFICATE_VERIFY - -/* Define to 1 if you have the `gnutls_certificate_set_verify_function' - function. */ -#undef HAVE_GNUTLS_CERTIFICATE_SET_VERIFY_FUNCTION - -/* Define to 1 if you have the gpm library (-lgpm). */ -#undef HAVE_GPM - -/* Define to 1 if you have the `grantpt' function. */ -#undef HAVE_GRANTPT - -/* Define to 1 if using GSettings. */ -#undef HAVE_GSETTINGS - -/* Define to 1 if using GTK 3 or later. */ -#undef HAVE_GTK3 - -/* Define to 1 if you have the `gtk_adjustment_get_page_size' function. */ -#undef HAVE_GTK_ADJUSTMENT_GET_PAGE_SIZE - -/* Define to 1 if you have the `gtk_dialog_get_action_area' function. */ -#undef HAVE_GTK_DIALOG_GET_ACTION_AREA - -/* Define to 1 if you have the `gtk_file_selection_new' function. */ -#undef HAVE_GTK_FILE_SELECTION_NEW - -/* Define to 1 if you have the `gtk_handle_box_new' function. */ -#undef HAVE_GTK_HANDLE_BOX_NEW - -/* Define to 1 if you have the `gtk_main' function. */ -#undef HAVE_GTK_MAIN - -/* Define to 1 if you have the `gtk_orientable_set_orientation' function. */ -#undef HAVE_GTK_ORIENTABLE_SET_ORIENTATION - -/* Define to 1 if you have the `gtk_tearoff_menu_item_new' function. */ -#undef HAVE_GTK_TEAROFF_MENU_ITEM_NEW - -/* Define to 1 if you have the `gtk_widget_get_mapped' function. */ -#undef HAVE_GTK_WIDGET_GET_MAPPED - -/* Define to 1 if you have the `gtk_widget_get_sensitive' function. */ -#undef HAVE_GTK_WIDGET_GET_SENSITIVE - -/* Define to 1 if you have the `gtk_widget_get_window' function. */ -#undef HAVE_GTK_WIDGET_GET_WINDOW - -/* Define to 1 if you have the `gtk_widget_set_has_window' function. */ -#undef HAVE_GTK_WIDGET_SET_HAS_WINDOW - -/* Define to 1 if you have the `gtk_window_set_has_resize_grip' function. */ -#undef HAVE_GTK_WINDOW_SET_HAS_RESIZE_GRIP - -/* Define to 1 if you have the `g_type_init' function. */ -#undef HAVE_G_TYPE_INIT - -/* Define to 1 if netdb.h declares h_errno. */ -#define HAVE_H_ERRNO 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_IFADDRS_H - -/* Define to 1 if using imagemagick. */ -#undef HAVE_IMAGEMAGICK - -/* Define to 1 if you have inet sockets. */ -#define HAVE_INET_SOCKETS 1 - -/* Define to 1 to use inotify. */ -#undef HAVE_INOTIFY - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the jpeg library (-ljpeg). */ -#undef HAVE_JPEG - -/* Define to 1 if you have the header file. */ -#undef HAVE_KERBEROSIV_DES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_KERBEROSIV_KRB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_KERBEROS_DES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_KERBEROS_KRB_H - -/* Define to 1 if `e_text' is a member of `krb5_error'. */ -#undef HAVE_KRB5_ERROR_E_TEXT - -/* Define to 1 if `text' is a member of `krb5_error'. */ -#undef HAVE_KRB5_ERROR_TEXT - -/* Define to 1 if you have the header file. */ -#undef HAVE_KRB5_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_KRB_H - -/* Define if you have and nl_langinfo(CODESET). */ -#define HAVE_LANGINFO_CODESET 1 - -/* Define to 1 if you have the `com_err' library (-lcom_err). */ -#undef HAVE_LIBCOM_ERR - -/* Define to 1 if you have the `crypto' library (-lcrypto). */ -#undef HAVE_LIBCRYPTO - -/* Define to 1 if you have the `des' library (-ldes). */ -#undef HAVE_LIBDES - -/* Define to 1 if you have the `des425' library (-ldes425). */ -#undef HAVE_LIBDES425 - -/* Define to 1 if you have the `dgc' library (-ldgc). */ -#undef HAVE_LIBDGC - -/* Define to 1 if you have the `dnet' library (-ldnet). */ -#undef HAVE_LIBDNET - -/* Define to 1 if you have the header file. */ -#undef HAVE_LIBGEN_H - -/* Define to 1 if you have the hesiod library (-lhesiod). */ -#undef HAVE_LIBHESIOD - -/* Define to 1 if you have the `k5crypto' library (-lk5crypto). */ -#undef HAVE_LIBK5CRYPTO - -/* Define to 1 if you have the `krb' library (-lkrb). */ -#undef HAVE_LIBKRB - -/* Define to 1 if you have the `krb4' library (-lkrb4). */ -#undef HAVE_LIBKRB4 - -/* Define to 1 if you have the `krb5' library (-lkrb5). */ -#undef HAVE_LIBKRB5 - -/* Define to 1 if you have the `kstat' library (-lkstat). */ -#undef HAVE_LIBKSTAT - -/* Define to 1 if you have the `lockfile' library (-llockfile). */ -#undef HAVE_LIBLOCKFILE - -/* Define to 1 if you have the `m' library (-lm). */ -#undef HAVE_LIBM - -/* Define to 1 if you have the `mail' library (-lmail). */ -#undef HAVE_LIBMAIL - -/* Define to 1 if using libotf. */ -#undef HAVE_LIBOTF - -/* Define to 1 if you have the `perfstat' library (-lperfstat). */ -#undef HAVE_LIBPERFSTAT - -/* Define to 1 if you have the header file. */ -#undef HAVE_LIBPNG_PNG_H - -/* Define to 1 if you have the `pthreads' library (-lpthreads). */ -#undef HAVE_LIBPTHREADS - -/* Define to 1 if you have the resolv library (-lresolv). */ -#undef HAVE_LIBRESOLV - -/* Define to 1 if using SELinux. */ -#undef HAVE_LIBSELINUX - -/* Define to 1 if you have the `Xext' library (-lXext). */ -#undef HAVE_LIBXEXT - -/* Define to 1 if you have the libxml library (-lxml2). */ -#undef HAVE_LIBXML2 - -/* Define to 1 if you have the `Xmu' library (-lXmu). */ -#undef HAVE_LIBXMU - -/* Define to 1 if you have the header file. */ -#undef HAVE_LINUX_VERSION_H - -/* Define to 1 if you have the `localtime_r' function. */ -#undef HAVE_LOCALTIME_R - -/* Define to 1 if you support file names longer than 14 characters. */ -#define HAVE_LONG_FILE_NAMES 1 - -/* Define to 1 if the system has the type 'long long int'. */ -#undef HAVE_LONG_LONG_INT - -/* Define to 1 if you have the `lrand48' function. */ -#undef HAVE_LRAND48 - -/* Define to 1 if you have the `lstat' function. */ -#undef HAVE_LSTAT - -/* Define to 1 if you have the `lutimes' function. */ -#undef HAVE_LUTIMES - -/* Define to 1 if using libm17n-flt. */ -#undef HAVE_M17N_FLT - -/* Define to 1 if you have the header file. */ -#undef HAVE_MACHINE_SOUNDCARD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MACH_MACH_H - -/* Define to 1 if you have the `MagickExportImagePixels' function. */ -#undef HAVE_MAGICKEXPORTIMAGEPIXELS - -/* Define to 1 if you have the `MagickMergeImageLayers' function. */ -#undef HAVE_MAGICKMERGEIMAGELAYERS - -/* Define to 1 if you have the header file. */ -#undef HAVE_MAILLOCK_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MALLOC_MALLOC_H - -/* Define to 1 if declares mbstate_t. */ -#undef HAVE_MBSTATE_T - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `memrchr' function. */ -#undef HAVE_MEMRCHR - -/* Define to 1 if you have mouse menus. (This is automatic if you use X, but - the option to specify it remains.) It is also defined with other window - systems that support xmenu.c. */ -#undef HAVE_MENUS - -/* Define to 1 if you have the `mkostemp' function. */ -#define HAVE_MKOSTEMP 1 - -/* Define to 1 if you have the `mkstemp' function. */ -#undef HAVE_MKSTEMP - -/* Define to 1 if you have a working `mmap' system call. */ -#undef HAVE_MMAP - -/* Define to 1 if you have the `nanotime' function. */ -#undef HAVE_NANOTIME - -/* Define to 1 if you have the header file. */ -#undef HAVE_NET_IF_DL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_NET_IF_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_NLIST_H - -/* Define to 1 if you are using the NeXTstep API, either GNUstep or Cocoa on - Mac OS X. */ -#undef HAVE_NS - -/* Define to use native MS Windows GUI. */ -#define HAVE_NTGUI 1 - -/* Define to 1 if libotf has OTF_get_variation_glyphs. */ -#undef HAVE_OTF_GET_VARIATION_GLYPHS - -/* Define to 1 if personality LINUX32 can be set. */ -#undef HAVE_PERSONALITY_LINUX32 - -/* Define to 1 if you have the png library (-lpng). */ -#undef HAVE_PNG - -/* Define to 1 if you have the header file. */ -#undef HAVE_PNG_H - -/* Define to 1 if you have the `posix_memalign' function. */ -#undef HAVE_POSIX_MEMALIGN - -/* Define to 1 if you have the `posix_openpt' function. */ -#undef HAVE_POSIX_OPENPT - -/* Define if you have the /proc filesystem. */ -#undef HAVE_PROCFS - -/* Define to 1 if you have the `pselect' function. */ -#undef HAVE_PSELECT - -/* Define to 1 if you have the `pstat_getdynamic' function. */ -#undef HAVE_PSTAT_GETDYNAMIC - -/* Define to 1 if you have pthread (-lpthread). */ -#undef HAVE_PTHREAD - -/* Define to 1 if you have the header file. */ -#undef HAVE_PTHREAD_H - -/* Define to 1 if the pthread_sigmask function can be used (despite bugs). */ -#undef HAVE_PTHREAD_SIGMASK - -/* Define if the system supports pty devices. */ -#undef HAVE_PTYS - -/* Define to 1 if you have the header file. */ -#undef HAVE_PTY_H - -/* Define to 1 if you have the header file. */ -#define HAVE_PWD_H 1 - -/* Define to 1 if you have the `random' function. */ -#define HAVE_RANDOM 1 - -/* Define to 1 if you have the `readlink' function. */ -#undef HAVE_READLINK - -/* Define to 1 if you have the `readlinkat' function. */ -#undef HAVE_READLINKAT - -/* Define to 1 if you have the `recvfrom' function. */ -#define HAVE_RECVFROM 1 - -/* Define to 1 if res_init is available. */ -#undef HAVE_RES_INIT - -/* Define to 1 if you have the `rint' function. */ -#undef HAVE_RINT - -/* Define to 1 if using librsvg. */ -#undef HAVE_RSVG - -/* Define to 1 if you have the `select' function. */ -#define HAVE_SELECT 1 - -/* Define to 1 if you have the `sendto' function. */ -#define HAVE_SENDTO 1 - -/* Define to 1 if you have the `setitimer' function. */ -#define HAVE_SETITIMER 1 - -/* Define to 1 if you have the `setlocale' function. */ -#define HAVE_SETLOCALE 1 - -/* Define to 1 if you have the `setrlimit' function. */ -#undef HAVE_SETRLIMIT - -/* Define to 1 if you have the `shutdown' function. */ -#define HAVE_SHUTDOWN 1 - -/* Define to 1 if you have the `sig2str' function. */ -#undef HAVE_SIG2STR - -/* Define to 1 if 'sig_atomic_t' is a signed integer type. */ -#undef HAVE_SIGNED_SIG_ATOMIC_T - -/* Define to 1 if 'wchar_t' is a signed integer type. */ -#undef HAVE_SIGNED_WCHAR_T - -/* Define to 1 if 'wint_t' is a signed integer type. */ -#undef HAVE_SIGNED_WINT_T - -/* Define to 1 if sigsetjmp and siglongjmp work. The value of this symbol is - irrelevant if HAVE__SETJMP is defined. */ -#undef HAVE_SIGSETJMP - -/* Define to 1 if the system has the type `sigset_t'. */ -#undef HAVE_SIGSET_T - -/* Define to 1 if you have the `snprintf' function. */ -#define HAVE_SNPRINTF 1 - -/* Define if the system supports 4.2-compatible sockets. - NT supports Winsock which is close enough (with some hacks). */ -#define HAVE_SOCKETS 1 - -/* Define to 1 if you have sound support. */ -#define HAVE_SOUND 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_SOUNDCARD_H - -/* Define to 1 if `speed_t' is declared by . */ -#undef HAVE_SPEED_T - -/* Define to 1 if you have the `statacl' function. */ -#undef HAVE_STATACL - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDIO_EXT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strsignal' function. */ -#undef HAVE_STRSIGNAL - -/* Define to 1 if you have the `strtoimax' function. */ -#undef HAVE_STRTOIMAX - -/* Define to 1 if you have the `strtoll' function. */ -#undef HAVE_STRTOLL - -/* Define to 1 if you have the `strtoull' function. */ -#define HAVE_STRTOULL 1 - -/* Define to 1 if you have the `strtoumax' function. */ -#define HAVE_STRTOUMAX 1 - -/* Define to 1 if `ifr_addr' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_ADDR - -/* Define to 1 if `ifr_addr.sa_len' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_ADDR_SA_LEN - -/* Define to 1 if `ifr_broadaddr' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_BROADADDR - -/* Define to 1 if `ifr_flags' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_FLAGS - -/* Define to 1 if `ifr_hwaddr' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_HWADDR - -/* Define to 1 if `ifr_netmask' is a member of `struct ifreq'. */ -#undef HAVE_STRUCT_IFREQ_IFR_NETMASK - -/* Define to 1 if `n_un.n_name' is a member of `struct nlist'. */ -#undef HAVE_STRUCT_NLIST_N_UN_N_NAME - -/* Define to 1 if `st_atimensec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_ATIMENSEC - -/* Define to 1 if `st_atimespec.tv_nsec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC - -/* Define to 1 if `st_atim.st__tim.tv_nsec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC - -/* Define to 1 if `st_atim.tv_nsec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC - -/* Define to 1 if `st_birthtimensec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_BIRTHTIMENSEC - -/* Define to 1 if `st_birthtimespec.tv_nsec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_BIRTHTIMESPEC_TV_NSEC - -/* Define to 1 if `st_birthtim.tv_nsec' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_BIRTHTIM_TV_NSEC - -/* Define to 1 if `tm_zone' is a member of `struct tm'. */ -#undef HAVE_STRUCT_TM_TM_ZONE - -/* Define if struct utimbuf is declared -- usually in . Some systems - have utime.h but don't declare the struct anywhere. */ -#undef HAVE_STRUCT_UTIMBUF - -/* Define if struct stat has an st_dm_mode member. */ -#undef HAVE_ST_DM_MODE - -/* Define to 1 if you have the `symlink' function. */ -#undef HAVE_SYMLINK - -/* Define to 1 if you have the `sync' function. */ -#undef HAVE_SYNC - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_ACL_H 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_BITYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_INOTIFY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_LOADAVG_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_PARAM_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_RESOURCE_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SELECT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SOCKET_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SOUNDCARD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SYSTEMINFO_H - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TIMEB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TIME_H 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_UN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_UTSNAME_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_VLIMIT_H - -/* Define to 1 if you have that is POSIX.1 compatible. */ -#define HAVE_SYS_WAIT_H 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_TERM_H - -/* Define to 1 if you have the tiff library (-ltiff). */ -#undef HAVE_TIFF - -/* Define to 1 if you have the `timer_settime' function. */ -#undef HAVE_TIMER_SETTIME - -/* Define if struct tm has the tm_gmtoff member. */ -#undef HAVE_TM_GMTOFF - -/* Define to 1 if your `struct tm' has `tm_zone'. Deprecated, use - `HAVE_STRUCT_TM_TM_ZONE' instead. */ -#undef HAVE_TM_ZONE - -/* Define to 1 if you have the `touchlock' function. */ -#undef HAVE_TOUCHLOCK - -/* Define to 1 if you don't have `tm_zone' but do have the external array - `tzname'. */ -#define HAVE_TZNAME 1 - -/* Define to 1 if you have the `tzset' function. */ -#define HAVE_TZSET 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to 1 if you have the `unsetenv' function. */ -#define HAVE_UNSETENV 1 - -/* Define to 1 if the system has the type 'unsigned long long int'. */ -#undef HAVE_UNSIGNED_LONG_LONG_INT - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTIL_H - -/* Define to 1 if you have the `utimensat' function. */ -#undef HAVE_UTIMENSAT - -/* Define to 1 if you have the `utimes' function. */ -#undef HAVE_UTIMES - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTIME_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTMP_H - -/* Define to 1 if you have the `vfork' function. */ -#undef HAVE_VFORK - -/* Define to 1 if you have the header file. */ -#undef HAVE_VFORK_H - -/* Define to 1 to use w32notify. */ -#define HAVE_W32NOTIFY 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_WCHAR_H - -/* Define if you have the 'wchar_t' type. */ -#define HAVE_WCHAR_T 1 - -/* Define if you have a window system. */ -#undef HAVE_WINDOW_SYSTEM - -/* Define to 1 if you have the header file. */ -#undef HAVE_WINSOCK2_H - -/* Define to 1 if `fork' works. */ -#undef HAVE_WORKING_FORK - -/* Define to 1 if fstatat (..., 0) works. For example, it does not work in AIX - 7.1. */ -#undef HAVE_WORKING_FSTATAT_ZERO_FLAG - -/* Define if utimes works properly. */ -#undef HAVE_WORKING_UTIMES - -/* Define to 1 if `vfork' works. */ -#undef HAVE_WORKING_VFORK - -/* Define to 1 if you have the header file. */ -#undef HAVE_WS2TCPIP_H - -/* Define to 1 if you want to use version 11 of X windows. Otherwise, Emacs - expects to use version 10. */ -#undef HAVE_X11 - -/* Define to 1 if you have the X11R6 or newer version of Xlib. */ -#undef HAVE_X11R6 - -/* Define if you have usable X11R6-style XIM support. */ -#undef HAVE_X11R6_XIM - -/* Define to 1 if you have the X11R6 or newer version of Xt. */ -#undef HAVE_X11XTR6 - -/* Define to 1 if you have the Xaw3d library (-lXaw3d). */ -#undef HAVE_XAW3D - -/* Define to 1 if you have the Xft library. */ -#undef HAVE_XFT - -/* Define to 1 if XIM is available */ -#undef HAVE_XIM - -/* Define to 1 if you have the Xinerama extension. */ -#undef HAVE_XINERAMA - -/* Define to 1 if you have the Xkb extension. */ -#undef HAVE_XKB - -/* Define to 1 if you have the Xpm library (-lXpm). */ -#undef HAVE_XPM - -/* Define to 1 if you have the XRandr extension. */ -#undef HAVE_XRANDR - -/* Define to 1 if you have the `XrmSetDatabase' function. */ -#undef HAVE_XRMSETDATABASE - -/* Define to 1 if you have the `XRRGetOutputPrimary' function. */ -#undef HAVE_XRRGETOUTPUTPRIMARY - -/* Define to 1 if you have the `XRRGetScreenResourcesCurrent' function. */ -#undef HAVE_XRRGETSCREENRESOURCESCURRENT - -/* Define to 1 if you have the `XScreenNumberOfScreen' function. */ -#undef HAVE_XSCREENNUMBEROFSCREEN - -/* Define to 1 if you have the `XScreenResourceString' function. */ -#undef HAVE_XSCREENRESOURCESTRING - -/* Define if you have usable i18n support. */ -#undef HAVE_X_I18N - -/* Define to 1 if you have the SM library (-lSM). */ -#undef HAVE_X_SM - -/* Define to 1 if you want to use the X window system. */ -#undef HAVE_X_WINDOWS - -/* Define to 1 if the system has the type `_Bool'. */ -#undef HAVE__BOOL - -/* Define to 1 if you have the `_ftime' function. */ -#undef HAVE__FTIME - -/* Define to 1 if _setjmp and _longjmp work. */ -#define HAVE__SETJMP 1 - -/* Define to 1 if you have the `__builtin_unwind_init' function. */ -#undef HAVE___BUILTIN_UNWIND_INIT - -/* Define to 1 if you have the `__executable_start' function. */ -#undef HAVE___EXECUTABLE_START - -/* Define to 1 if you have the `__fpending' function. */ -#undef HAVE___FPENDING - -/* Define to support using a Hesiod database to find the POP server. */ -#undef HESIOD - -/* Define if the system is HPUX. */ -#undef HPUX - -/* This is substituted when $TERM is "internal". */ -#undef INTERNAL_TERMINAL - -/* Define to read input using SIGIO. */ -#undef INTERRUPT_INPUT - -/* Define if the system is IRIX. */ -#undef IRIX6_5 - -/* Returns true if character is any form of separator. */ -#define IS_ANY_SEP(_c_) (IS_DIRECTORY_SEP (_c_) || IS_DEVICE_SEP (_c_)) - -/* Returns true if character is a device separator. */ -#define IS_DEVICE_SEP(_c_) ((_c_) == DEVICE_SEP) - -/* Returns true if character is a directory separator. */ -#define IS_DIRECTORY_SEP(_c_) ((_c_) == '/' || (_c_) == '\\') - -/* Define to support Kerberos-authenticated POP mail retrieval. */ -#undef KERBEROS - -/* Define to use Kerberos 5 instead of Kerberos 4. */ -#undef KERBEROS5 - -/* Define to 1 if localtime caches TZ. */ -#define LOCALTIME_CACHE 1 - -/* Define to 1 if 'lstat' dereferences a symlink specified with a trailing - slash. */ -#undef LSTAT_FOLLOWS_SLASHED_SYMLINK - -/* String giving fallback POP mail host. */ -#undef MAILHOST - -/* Define to unlink, rather than empty, mail spool after reading. */ -#undef MAIL_UNLINK_SPOOL - -/* Define if the mailer uses flock to interlock the mail spool. */ -#undef MAIL_USE_FLOCK - -/* Define if the mailer uses lockf to interlock the mail spool. */ -#undef MAIL_USE_LOCKF - -/* Define to support MMDF mailboxes in movemail. */ -#undef MAIL_USE_MMDF - -/* Define to support POP mail retrieval. */ -#define MAIL_USE_POP 1 - -/* Define if the system is MS DOS. */ -#undef MSDOS - -/* Define if system's imake configuration file defines `NeedWidePrototypes' as - `NO'. */ -#undef NARROWPROTO - -/* Define if XEditRes should not be used. */ -#undef NO_EDITRES - -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -#undef NO_MINUS_C_MINUS_O - -/* Minimum value of NSIG. */ -#undef NSIG_MINIMUM - -/* Define to 1 if `NSInteger' is defined. */ -#undef NS_HAVE_NSINTEGER - -/* Define to 1 if you are using NS windowing under MacOS X. */ -#undef NS_IMPL_COCOA - -/* Define to 1 if you are using NS windowing under GNUstep. */ -#undef NS_IMPL_GNUSTEP - -/* Name of the file to open to get a null file, or a data sink. */ -#define NULL_DEVICE "NUL:" - -/* Define to 1 if the nlist n_name member is a pointer */ -#undef N_NAME_POINTER - -/* Name of package */ -#define PACKAGE "emacs" - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* the number of pending output bytes on stream 'fp' */ -#define PENDING_OUTPUT_N_BYTES (fp->_ptr - fp->_base) - -/* Define to empty to suppress deprecation warnings when building with - --enable-gcc-warnings and with libpng versions before 1.5, which lack - png_longjmp. */ -#undef PNG_DEPSTRUCT - -/* Define if process_send_signal should use VSUSP instead of VSWTCH. */ -#undef PREFER_VSUSP - -/* Define to 1 if pthread_sigmask(), when it fails, returns -1 and sets errno. - */ -#undef PTHREAD_SIGMASK_FAILS_WITH_ERRNO - -/* Define to 1 if pthread_sigmask() may returns 0 and have no effect. */ -#undef PTHREAD_SIGMASK_INEFFECTIVE - -/* Define to 1 if pthread_sigmask() unblocks signals incorrectly. */ -#undef PTHREAD_SIGMASK_UNBLOCK_BUG - -/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type - 'ptrdiff_t'. */ -#undef PTRDIFF_T_SUFFIX - -/* How to iterate over PTYs. */ -#undef PTY_ITERATION - -/* How to get the device name of the control end of a PTY, if non-standard. */ -#undef PTY_NAME_SPRINTF - -/* How to open a PTY, if non-standard. */ -#undef PTY_OPEN - -/* How to get device name of the tty end of a PTY, if non-standard. */ -#undef PTY_TTY_NAME_SPRINTF - -/* Define to 1 if readlink fails to recognize a trailing slash. */ -#undef READLINK_TRAILING_SLASH_BUG - -/* Define REL_ALLOC if you want to use the relocating allocator for buffer - space. */ -#define REL_ALLOC 1 - -/* Define to 1 if stat needs help when passed a directory name with a trailing - slash */ -#undef REPLACE_FUNC_STAT_DIR - -/* Define to 1 if stat needs help when passed a file name with a trailing - slash */ -#undef REPLACE_FUNC_STAT_FILE - -/* Define if emacs.c needs to call run_time_remap; for HPUX. */ -#undef RUN_TIME_REMAP - -/* Character that separates PATH elements. */ -#define SEPCHAR ';' - -/* How to set up a slave PTY, if needed. */ -#undef SETUP_SLAVE_PTY - -/* Make process_send_signal work by "typing" a signal character on the pty. */ -#undef SIGNALS_VIA_CHARACTERS - -/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type - 'sig_atomic_t'. */ -#undef SIG_ATOMIC_T_SUFFIX - -/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type - 'size_t'. */ -#undef SIZE_T_SUFFIX - -/* Define if the system is Solaris. */ -#undef SOLARIS2 - -/* If using the C implementation of alloca, define if you know the - direction of stack growth for your system; otherwise it will be - automatically deduced at runtime. - STACK_DIRECTION > 0 => grows toward higher addresses - STACK_DIRECTION < 0 => grows toward lower addresses - STACK_DIRECTION = 0 => direction of growth unknown */ -#undef STACK_DIRECTION - -/* Define to 1 if the `S_IS*' macros in do not work properly. */ -#undef STAT_MACROS_BROKEN - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define to 1 on System V Release 4. */ -#undef SVR4 - -/* Define to use system malloc. */ -#undef SYSTEM_MALLOC - -/* The type of system you are compiling for; sets `system-type'. */ -#define SYSTEM_TYPE "windows-nt" - -/* Undocumented. */ -#undef TAB3 - -/* Undocumented. */ -#undef TABDLY - -/* Define to 1 if you use terminfo instead of termcap. */ -#undef TERMINFO - -/* Define to the header for the built-in window system. */ -#define TERM_HEADER "w32term.h" - -/* Define to 1 if you can safely include both and . */ -#define TIME_WITH_SYS_TIME 1 - -/* Some platforms redefine this. */ -#undef TIOCSIGSEND - -/* Define to 1 if your declares `struct tm'. */ -#undef TM_IN_SYS_TIME - -/* Define to 1 if the type of the st_atim member of a struct stat is struct - timespec. */ -#undef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC - -/* Define to 1 for Encore UMAX. */ -#undef UMAX - -/* Define to 1 for Encore UMAX 4.3 that has instead of - . */ -#undef UMAX4_3 - -/* Define if the system has Unix98 PTYs. */ -#undef UNIX98_PTYS - -/* Define to 1 if FIONREAD is usable. */ -#define USABLE_FIONREAD 1 - -/* Define to 1 if SIGIO is usable. */ -#undef USABLE_SIGIO - -/* How to get a user's full name. */ -#define USER_FULL_NAME pw->pw_gecos - -/* Define to nonzero if you want access control list support. */ -#undef USE_ACL - -/* Define to 1 if using file notifications. */ -#define USE_FILE_NOTIFY 1 - -/* Define to 1 if using GTK. */ -#undef USE_GTK - -/* Define to 1 if using the Lucid X toolkit. */ -#undef USE_LUCID - -/* Define to use mmap to allocate buffer text. */ -#undef USE_MMAP_FOR_BUFFERS - -/* Define to 1 if using the Motif X toolkit. */ -#undef USE_MOTIF - -/* Enable extensions on AIX 3, Interix. */ -#ifndef _ALL_SOURCE -# undef _ALL_SOURCE -#endif -/* Enable general extensions on OS X. */ -#ifndef _DARWIN_C_SOURCE -# undef _DARWIN_C_SOURCE -#endif -/* Enable GNU extensions on systems that have them. */ -#ifndef _GNU_SOURCE -# undef _GNU_SOURCE -#endif -/* Enable threading extensions on Solaris. */ -#ifndef _POSIX_PTHREAD_SEMANTICS -# undef _POSIX_PTHREAD_SEMANTICS -#endif -/* Enable extensions on HP NonStop. */ -#ifndef _TANDEM_SOURCE -# undef _TANDEM_SOURCE -#endif -/* Enable X/Open extensions if necessary. HP-UX 11.11 defines - mbstate_t only if _XOPEN_SOURCE is defined to 500, regardless of - whether compiling with -Ae or -D_HPUX_SOURCE=1. */ -#ifndef _XOPEN_SOURCE -# undef _XOPEN_SOURCE -#endif -/* Enable general extensions on Solaris. */ -#ifndef __EXTENSIONS__ -# undef __EXTENSIONS__ -#endif - - -/* Define to 1 if we should use toolkit scroll bars. */ -#define USE_TOOLKIT_SCROLL_BARS 1 - -/* Define to 1 if we should use XIM, if it is available. */ -#undef USE_XIM - -/* Define to 1 if using an X toolkit. */ -#undef USE_X_TOOLKIT - -/* Define if the system is compatible with System III. */ -#undef USG - -/* Define if the system is compatible with System V. */ -#undef USG5 - -/* Define if the system is compatible with System V Release 4. */ -#undef USG5_4 - -/* Define for USG systems where it works to open a pty's tty in the parent - process, then close and reopen it in the child. */ -#undef USG_SUBTTY_WORKS - -/* Version number of package */ -#define VERSION "25.0.50" - -/* Define to 1 if unsetenv returns void instead of int. */ -#undef VOID_UNSETENV - -/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type - 'wchar_t'. */ -#undef WCHAR_T_SUFFIX - -/* Use long long for EMACS_INT if available. */ -/* #undef WIDE_EMACS_INT */ - -/* Define to l, ll, u, ul, ull, etc., as suitable for constants of type - 'wint_t'. */ -#undef WINT_T_SUFFIX - -/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most - significant byte first (like Motorola and SPARC, unlike Intel). */ -#if defined AC_APPLE_UNIVERSAL_BUILD -# if defined __BIG_ENDIAN__ -# define WORDS_BIGENDIAN 1 -# endif -#else -# ifndef WORDS_BIGENDIAN -# undef WORDS_BIGENDIAN -# endif -#endif - -/* Define this to check for malloc buffer overrun. */ -#undef XMALLOC_OVERRUN_CHECK - -/* Compensate for a bug in Xos.h on some systems, where it requires time.h. */ -#undef XOS_NEEDS_TIME_H - -/* Define to the type of the 6th arg of XRegisterIMInstantiateCallback, either - XPointer or XPointer*. */ -#undef XRegisterIMInstantiateCallback_arg6 - -/* Define if the system is AIX. */ -#undef _AIX - -/* Enable large inode numbers on Mac OS X 10.5. */ -#undef _DARWIN_USE_64_BIT_INODE - -/* Number of bits in a file offset, on hosts where this is settable. */ -#undef _FILE_OFFSET_BITS - -/* Define to 1 if Gnulib overrides 'struct stat' on Windows so that struct - stat.st_size becomes 64-bit. */ -#undef _GL_WINDOWS_64_BIT_ST_SIZE - -/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */ -#undef _LARGEFILE_SOURCE - -/* Define for large files, on AIX-style hosts. */ -#undef _LARGE_FILES - -/* Define to 1 if on MINIX. */ -#undef _MINIX - -/* Define if GNUstep uses ObjC exceptions. */ -#undef _NATIVE_OBJC_EXCEPTIONS - -/* Define to 1 to make NetBSD features available. MINIX 3 needs this. */ -#undef _NETBSD_SOURCE - -/* The _Noreturn keyword of C11. */ -#if ! (defined _Noreturn \ - || (defined __STDC_VERSION__ && 201112 <= __STDC_VERSION__)) -# if (3 <= __GNUC__ || (__GNUC__ == 2 && 8 <= __GNUC_MINOR__)) -# define _Noreturn __attribute__ ((__noreturn__)) -# elif defined _MSC_VER && 1200 <= _MSC_VER -# define _Noreturn __declspec (noreturn) -# else -# define _Noreturn -# endif -#endif - - -/* Define to 2 if the system does not provide POSIX.1 features except with - this defined. */ -#undef _POSIX_1_SOURCE - -/* Define to 1 if you need to in order for 'stat' and other things to work. */ -#undef _POSIX_SOURCE - -/* Needed for system_process_attributes on Solaris. */ -#undef _STRUCTURED_PROC - -/* Define to rpl_ if the getopt replacement functions and variables should be - used. */ -#undef __GETOPT_PREFIX - -/* Define to compiler's equivalent of C99 restrict keyword in array - declarations. Define as empty for no equivalent. */ -#undef __restrict_arr - -/* Some platforms that do not use configure define this to include extra - configuration information. */ -#define config_opsysfile - -/* _GL_INLINE is a portable alternative to ISO C99 plain 'inline'. - _GL_EXTERN_INLINE is a portable alternative to 'extern inline'. - _GL_INLINE_HEADER_BEGIN contains useful stuff to put - in an include file, before uses of _GL_INLINE. - It suppresses GCC's bogus "no previous prototype for 'FOO'" diagnostic, - when FOO is an inline function in the header; see - . - _GL_INLINE_HEADER_END contains useful stuff to put - in the same include file, after uses of _GL_INLINE. - - Suppress extern inline with HP-UX cc, as it appears to be broken; see - . - - Suppress extern inline with Sun C in standards-conformance mode, as it - mishandles inline functions that call each other. E.g., for 'inline void f - (void) { } inline void g (void) { f (); }', c99 incorrectly complains - 'reference to static identifier "f" in extern inline function'. - This bug was observed with Sun C 5.12 SunOS_i386 2011/11/16. - - Suppress the use of extern inline on Apple's platforms, as Libc at least - through Libc-825.26 (2013-04-09) is incompatible with it; see, e.g., - . - Perhaps Apple will fix this some day. */ -#if ((__GNUC__ \ - ? defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__ \ - : (199901L <= __STDC_VERSION__ \ - && !defined __HP_cc \ - && !(defined __SUNPRO_C && __STDC__))) \ - && !defined __APPLE__) -# define _GL_INLINE inline -# define _GL_EXTERN_INLINE extern inline -#elif 2 < __GNUC__ + (7 <= __GNUC_MINOR__) && !defined __APPLE__ -# if __GNUC_GNU_INLINE__ - /* __gnu_inline__ suppresses a GCC 4.2 diagnostic. */ -# define _GL_INLINE extern inline __attribute__ ((__gnu_inline__)) -# else -# define _GL_INLINE extern inline -# endif -# define _GL_EXTERN_INLINE extern -#else -# define _GL_INLINE static _GL_UNUSED -# define _GL_EXTERN_INLINE static _GL_UNUSED -#endif - -#if 4 < __GNUC__ + (6 <= __GNUC_MINOR__) -# if defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__ -# define _GL_INLINE_HEADER_CONST_PRAGMA -# else -# define _GL_INLINE_HEADER_CONST_PRAGMA \ - _Pragma ("GCC diagnostic ignored \"-Wsuggest-attribute=const\"") -# endif -# define _GL_INLINE_HEADER_BEGIN \ - _Pragma ("GCC diagnostic push") \ - _Pragma ("GCC diagnostic ignored \"-Wmissing-prototypes\"") \ - _Pragma ("GCC diagnostic ignored \"-Wmissing-declarations\"") \ - _GL_INLINE_HEADER_CONST_PRAGMA -# define _GL_INLINE_HEADER_END \ - _Pragma ("GCC diagnostic pop") -#else -# define _GL_INLINE_HEADER_BEGIN -# define _GL_INLINE_HEADER_END -#endif - -/* A replacement for va_copy, if needed. */ -#define gl_va_copy(a,b) ((a) = (b)) - -/* Define to rpl_gmtime if the replacement function should be used. */ -#undef gmtime - -/* Work around a bug in Apple GCC 4.0.1 build 5465: In C99 mode, it supports - the ISO C 99 semantics of 'extern inline' (unlike the GNU C semantics of - earlier versions), but does not display it by setting __GNUC_STDC_INLINE__. - __APPLE__ && __MACH__ test for Mac OS X. - __APPLE_CC__ tests for the Apple compiler and its version. - __STDC_VERSION__ tests for the C99 mode. */ -#if defined __APPLE__ && defined __MACH__ && __APPLE_CC__ >= 5465 && !defined __cplusplus && __STDC_VERSION__ >= 199901L && !defined __GNUC_STDC_INLINE__ -# define __GNUC_STDC_INLINE__ 1 -#endif - -/* Define to 1 if the compiler is checking for lint. */ -#undef lint - -/* Define to rpl_localtime if the replacement function should be used. */ -#undef localtime - -/* Define to a type if does not define. */ -#undef mbstate_t - -/* Define to `int' if does not define. */ -#undef mode_t - -/* Define to the name of the strftime replacement function. */ -#define my_strftime nstrftime - -/* Define to the type of st_nlink in struct stat, or a supertype. */ -#define nlink_t short - -/* Define to `int' if does not define. */ -#undef pid_t - -/* Define to the equivalent of the C99 'restrict' keyword, or to - nothing if this is not supported. Do not define if restrict is - supported directly. */ -#undef restrict -/* Work around a bug in Sun C++: it does not support _Restrict or - __restrict__, even though the corresponding Sun C compiler ends up with - "#define restrict _Restrict" or "#define restrict __restrict__" in the - previous line. Perhaps some future version of Sun C++ will work with - restrict; if so, hopefully it defines __RESTRICT like Sun C does. */ -#if defined __SUNPRO_CC && !defined __RESTRICT -# define _Restrict -# define __restrict__ -#endif - -/* type to use in place of socklen_t if not defined */ -#undef socklen_t - -/* Define as a signed type of the same size as size_t. */ -#undef ssize_t - -/* Define to enable asynchronous subprocesses. */ -#define subprocesses - -/* Define to any substitute for sys_siglist. */ -#undef sys_siglist - -/* Define as a marker that can be attached to declarations that might not - be used. This helps to reduce warnings, such as from - GCC -Wunused-parameter. */ -#if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) -# define _GL_UNUSED __attribute__ ((__unused__)) -#else -# define _GL_UNUSED -#endif -/* The name _UNUSED_PARAMETER_ is an earlier spelling, although the name - is a misnomer outside of parameter lists. */ -#define _UNUSED_PARAMETER_ _GL_UNUSED - -/* The __pure__ attribute was added in gcc 2.96. */ -#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96) -# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__)) -#else -# define _GL_ATTRIBUTE_PURE /* empty */ -#endif - -/* The __const__ attribute was added in gcc 2.95. */ -#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95) -# define _GL_ATTRIBUTE_CONST __attribute__ ((__const__)) -#else -# define _GL_ATTRIBUTE_CONST /* empty */ -#endif - - -/* Define as a macro for copying va_list variables. */ -#undef va_copy - -/* Define as `fork' if `vfork' does not work. */ -#undef vfork - -#include - -#endif /* EMACS_CONFIG_H */ - -/* -Local Variables: -mode: c -End: -*/ diff --git a/nt/configure.bat b/nt/configure.bat index f6ac8fccc7..629bcc8449 100755 --- a/nt/configure.bat +++ b/nt/configure.bat @@ -1,6 +1,6 @@ @echo off rem ---------------------------------------------------------------------- -rem Configuration script for MS Windows operating systems +rem This was the old configuration script for MS Windows operating systems rem Copyright (C) 1999-2015 Free Software Foundation, Inc. rem This file is part of GNU Emacs. @@ -19,956 +19,8 @@ rem You should have received a copy of the GNU General Public License rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/. rem ---------------------------------------------------------------------- -rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS: -rem -rem + MS Windows 95, NT or later -rem + either MSVC 2.x or later, or gcc-2.95 or later (with GNU make 3.75 -rem or later) and the Mingw32 and Windows API headers and libraries. -rem + Visual Studio 2005 is not supported at this time. -rem -rem For reference, here is a list of which builds of GNU make are known to -rem work or not, and whether they work in the presence and/or absence of -rem sh.exe. -rem -rem sh exists no sh -rem cygwin b20.1 make (3.75): fails[1,5] fails[2,5] -rem MSVC compiled gmake 3.77: okay okay -rem MSVC compiled gmake 3.78.1: okay okay -rem MSVC compiled gmake 3.79.1: okay okay -rem mingw32/gcc-2.92.2 make (3.77): okay okay[4] -rem cygwin compiled gmake 3.77: fails[1,5] fails[2,5] -rem cygwin compiled gmake 3.78.1: fails[5] fails[2,5] -rem cygwin compiled gmake 3.79.1: fails[3,5] fails[2?,5] -rem cygwin compiled make 3.80: okay[6] fails?[7] -rem cygwin compiled make 3.81: fails fails?[7] -rem mingw32 compiled make 3.79.1: okay okay -rem mingw32 compiled make 3.80: okay okay?[7] -rem mingw32 compiled make 3.81: okay okay[8] -rem -rem [1] doesn't cope with makefiles with DOS line endings, so must mount -rem emacs source with text!=binary. -rem [2] fails when needs to invoke shell commands; okay invoking gcc etc. -rem [3] requires LC_MESSAGES support to build; cannot build with early -rem versions of cygwin. -rem [4] may fail on Windows 9X and Windows ME; if so, install Bash. -rem [5] fails when building leim due to the use of cygwin style paths. -rem May work if building emacs without leim. -rem [6] need to uncomment 3 lines in nt/gmake.defs that invoke `cygpath'; -rem look for "cygpath" near line 85 of gmake.defs. -rem [7] not recommended; please report if you try this combination. -rem [8] tested only on Windows XP. -rem echo **************************************************************** echo *** THIS METHOD OF BUILDING EMACS IS NO LONGER SUPPORTED. ** -echo *** INSTEAD, FOLLOW THE INSTRUCTIONS FROM INSTALL. ** +echo *** INSTEAD, FOLLOW THE INSTRUCTIONS IN THE FILE INSTALL. ** +echo *** IN THE SAME DIRECTORY AS THIS BATCH FILE. ** echo **************************************************************** -:confirm_continue -set /p answer=Continue running this script at your own risks ? (Y/N) -if x%answer% == xy (goto confirm_continue_y) -if x%answer% == xY (goto confirm_continue_y) -if x%answer% == xn (goto end) -if x%answer% == xN (goto end) -echo Please answer by Y or N -goto confirm_continue - -:confirm_continue_y -if exist config.log del config.log - -rem ---------------------------------------------------------------------- -rem See if the environment is large enough. We need 43 (?) bytes. -set $foo$=123456789_123456789_123456789_123456789_123 -if not "%$foo$%" == "123456789_123456789_123456789_123456789_123" goto SmallEnv -set $foo$= - -rem ---------------------------------------------------------------------- -rem Make sure we are running in the nt subdir -if exist configure.bat goto start -echo You must run configure from the nt subdirectory. -goto end - -:start -rem ---------------------------------------------------------------------- -rem Attempt to enable command extensions. Set use_extensions to 1 if -rem they are available and 0 if they are not available. -set use_extensions=1 -setlocal ENABLEEXTENSIONS -if "%CMDEXTVERSION%" == "" set use_extensions=0 -if "%use_extensions%" == "1" goto afterext - -echo. Command extensions are not available. Using parameters that include the = -echo. character by enclosing them in quotes will not be supported. - -:afterext - -rem ---------------------------------------------------------------------- -rem Default settings. -set prefix= -set nodebug=N -set noopt=N -set enablechecking=N -set profile=N -set nocygwin=N -set COMPILER= -set usercflags= -set escusercflags= -set docflags= -set userldflags= -set escuserldflags= -set extrauserlibs= -set doldflags= -set doextralibs= -set sep1= -set sep2= -set sep3= -set sep4= -set distfiles= - -rem ---------------------------------------------------------------------- -rem Handle arguments. -:again -if "%1" == "-h" goto usage -if "%1" == "--help" goto usage -if "%1" == "--prefix" goto setprefix -if "%1" == "--with-gcc" goto withgcc -if "%1" == "--with-msvc" goto withmsvc -if "%1" == "--no-debug" goto nodebug -if "%1" == "--no-opt" goto noopt -if "%1" == "--enable-checking" goto enablechecking -if "%1" == "--profile" goto profile -if "%1" == "--no-cygwin" goto nocygwin -if "%1" == "--cflags" goto usercflags -if "%1" == "--ldflags" goto userldflags -if "%1" == "--lib" goto extrauserlibs -if "%1" == "--without-png" goto withoutpng -if "%1" == "--without-jpeg" goto withoutjpeg -if "%1" == "--without-gif" goto withoutgif -if "%1" == "--without-tiff" goto withouttiff -if "%1" == "--without-gnutls" goto withoutgnutls -if "%1" == "--without-libxml2" goto withoutlibxml2 -if "%1" == "--without-xpm" goto withoutxpm -if "%1" == "--with-svg" goto withsvg -if "%1" == "--distfiles" goto distfiles -if "%1" == "" goto checkutils - -:usage -echo Usage: configure [options] -echo Options: -echo. --prefix PREFIX install Emacs in directory PREFIX -echo. --with-gcc use GCC to compile Emacs -echo. --with-msvc use MSVC to compile Emacs -echo. --no-debug exclude debug info from executables -echo. --no-opt disable optimization -echo. --enable-checking enable additional run-time checks -echo. --profile enable profiling -echo. --no-cygwin use -mno-cygwin option with GCC -echo. --cflags FLAG pass FLAG to compiler -echo. --ldflags FLAG pass FLAG to compiler when linking -echo. --lib LIB link to extra library LIB -echo. --without-png do not use PNG library even if it is installed -echo. --without-jpeg do not use JPEG library even if it is installed -echo. --without-gif do not use GIF library even if it is installed -echo. --without-tiff do not use TIFF library even if it is installed -echo. --without-xpm do not use XPM library even if it is installed -echo. --without-gnutls do not use GnuTLS library even if it is installed -echo. --without-libxml2 do not use libxml2 library even if it is installed -echo. --with-svg use the RSVG library (experimental) -echo. --distfiles path to files for make dist, e.g. libXpm.dll -if "%use_extensions%" == "0" goto end -echo. -echo. The cflags and ldflags arguments support parameters that include the = -echo. character. However, since the = character is normally treated as a -echo. separator character you will need to enclose any parameter that includes -echo. the = character in quotes. For example, to include -echo. -DSITELOAD_PURESIZE_EXTRA=100000 as one of the cflags you would run -echo. configure.bat as follows: -echo. configure.bat --cflags "-DSITELOAD_PURESIZE_EXTRA=100000" -echo. -echo. Note that this capability of processing parameters that include the = -echo. character depends on command extensions. This batch file attempts to -echo. enable command extensions. If command extensions cannot be enabled, a -echo. warning message will be displayed. -echo. -echo. IMPORTANT: This method of building Emacs for MS-Windows is deprecated, -echo. and could be removed in a future version of Emacs. The preferred way -echo to build Emacs for MS-Windows from now on is using the MSYS environment -echo. and MinGW development tools. Please see nt/INSTALL for details. -goto end - -rem ---------------------------------------------------------------------- - -:setprefix -shift -set prefix=%1 -shift -goto again - -rem ---------------------------------------------------------------------- - -:withgcc -set COMPILER=gcc -shift -goto again - -rem ---------------------------------------------------------------------- - -:withmsvc -set COMPILER=cl -shift -goto again - -rem ---------------------------------------------------------------------- - -:nodebug -set nodebug=Y -shift -goto again - -rem ---------------------------------------------------------------------- - -:noopt -set noopt=Y -shift -goto again - -rem ---------------------------------------------------------------------- - -:enablechecking -set enablechecking=Y -shift -goto again - -rem ---------------------------------------------------------------------- - -:profile -set profile=Y -shift -goto again - -rem ---------------------------------------------------------------------- - -:nocygwin -set nocygwin=Y -shift -goto again - -rem ---------------------------------------------------------------------- - -:usercflags -if "%use_extensions%" == "1" goto ucflagex -goto ucflagne - -:ucflagex -shift -set usercflags=%usercflags%%sep1%%~1 -set escusercflags=%usercflags:"=\"% -set sep1= %nothing% -shift -goto again - -:ucflagne -shift -set usercflags=%usercflags%%sep1%%1 -set escusercflags=%usercflags% -set sep1= %nothing% -shift -goto again - -:extrauserlibs -shift -echo. extrauserlibs: %extrauserlibs% -set extrauserlibs=%extrauserlibs%%sep4%%1 -set sep4= %nothing% -shift -goto again - -rem ---------------------------------------------------------------------- - -:userldflags -if "%use_extensions%" == "1" goto ulflagex -goto ulflagne - -:ulflagex -shift -set userldflags=%userldflags%%sep2%%~1 -set escuserldflags=%userldflags:"=\"% -set sep2= %nothing% -shift -goto again - -:ulflagne -shift -set userldflags=%userldflags%%sep2%%1 -set escuserldflags=%userldflags% -set sep2= %nothing% -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutpng -set pngsupport=N -set HAVE_PNG= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutjpeg -set jpegsupport=N -set HAVE_JPEG= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutgif -set gifsupport=N -set HAVE_GIF= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutgnutls -set tlssupport=N -set HAVE_GNUTLS= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutlibxml2 -set libxml2support=N -set HAVE_LIBXML2= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withouttiff -set tiffsupport=N -set HAVE_TIFF= -shift -goto again - -rem ---------------------------------------------------------------------- - -:withoutxpm -set xpmsupport=N -set HAVE_XPM= -shift -goto again - -:withsvg -shift -set svgsupport=Y -goto again - -rem ---------------------------------------------------------------------- - -:distfiles -set HAVE_DISTFILES=1 -shift -set distfiles=%distfiles%%sep3%%1 -set sep3= %nothing% -shift -goto again - -rem ---------------------------------------------------------------------- -rem Check that necessary utilities (cp and rm) are present. - -:checkutils -echo Checking for 'cp'... -cp configure.bat junk.bat -if not exist junk.bat goto needcp -echo Checking for 'rm'... -rm junk.bat -if exist junk.bat goto needrm -goto checkcompiler - -:needcp -echo You need 'cp' (the Unix file copy program) to build Emacs. -goto end - -:needrm -del junk.bat -echo You need 'rm' (the Unix file delete program) to build Emacs. -goto end - -rem ---------------------------------------------------------------------- -rem Auto-detect compiler if not specified, and validate GCC if chosen. - -:checkcompiler -if (%COMPILER%)==(cl) goto compilercheckdone -if (%COMPILER%)==(gcc) goto checkgcc - -echo Checking whether 'gcc' is available... -echo main(){} >junk.c -gcc -c junk.c -if exist junk.o goto checkgcc - -echo Checking whether 'cl' is available... -cl -nologo -c junk.c -if exist junk.obj goto clOK -goto nocompiler - -:checkgcc -if exist junk.o del junk.o -Rem WARNING -- COMMAND.COM on some systems only looks at the first -Rem 8 characters of a label. So do NOT be tempted to change -Rem chkapi* into something fancier like checkw32api -Rem You HAVE been warned! -if (%nocygwin%) == (Y) goto chkapiN -echo Checking whether gcc requires '-mno-cygwin'... -echo #include "cygwin/version.h" >junk.c -echo main(){} >>junk.c -echo gcc -c junk.c >>config.log -gcc -c junk.c >>config.log 2>&1 -if not exist junk.o goto chkapi -echo gcc -mno-cygwin -c junk.c >>config.log -gcc -mno-cygwin -c junk.c >>config.log 2>&1 -if exist junk.o set nocygwin=Y - -:chkapi -echo The failed program was: >>config.log -type junk.c >>config.log - -:chkapiN -rm -f junk.c junk.o -rem ---------------------------------------------------------------------- -rem Older versions of the Windows API headers either don't have any of -rem the IMAGE_xxx definitions (the headers that come with Cygwin b20.1 -rem are like this), or have a typo in the definition of -rem IMAGE_FIRST_SECTION (the headers with gcc/mingw32 2.95 have this -rem problem). The gcc/mingw32 2.95.2 headers are okay, as are distros -rem of w32api-xxx.zip from Anders Norlander since 1999-11-18 at least. -rem Beginning with Emacs 23, we need usp10.h. -rem -echo Checking whether Windows API headers are too old... -echo #include "windows.h" >junk.c -echo #include "usp10.h" >>junk.c -echo void test(PIMAGE_NT_HEADERS pHeader) >>junk.c -echo {PIMAGE_SECTION_HEADER pSection = IMAGE_FIRST_SECTION(pHeader);} >>junk.c -if (%nocygwin%) == (Y) goto chkapi1 -set cf=%usercflags% -goto chkapi2 - -:chkapi1 -set cf=%usercflags% -mno-cygwin - -:chkapi2 -echo on -gcc %cf% -c junk.c -@echo off -@echo gcc %cf% -c junk.c >>config.log -gcc %cf% -c junk.c >>config.log 2>&1 -set cf= -if exist junk.o goto chkuser -echo The failed program was: >>config.log -type junk.c >>config.log -goto nocompiler - -:chkuser -rm -f junk.o -echo int main (int argc, char *argv[]) {>junk.c -echo char *usercflags = "%escusercflags%";>>junk.c -echo }>>junk.c -echo gcc -Werror -c junk.c >>config.log -gcc -Werror -c junk.c >>config.log 2>&1 -if exist junk.o goto gccOk -echo. -echo Error in --cflags argument: %usercflags% -echo Backslashes and quotes cannot be used with --cflags. Please use forward -echo slashes for filenames and paths (e.g. when passing directories to -I). -rm -f junk.c -goto end - -:nocompiler -echo. -echo Configure failed. -echo To configure Emacs for Windows, you need to have either -echo gcc-2.95 or later with Mingw32 and the Windows API headers, -echo or MSVC 2.x or later. -del junk.c -goto end - -:gccOk -set COMPILER=gcc -echo Using 'gcc' -rm -f junk.c junk.o -Rem It is not clear what GCC version began supporting -mtune -Rem and pentium4 on x86, so check this explicitly. -echo main(){} >junk.c -echo gcc -c -O2 -mtune=pentium4 junk.c >>config.log -gcc -c -O2 -mtune=pentium4 junk.c >>config.log 2>&1 -if not errorlevel 1 goto gccMtuneOk -echo The failed program was: >>config.log -type junk.c >>config.log -set mf=-mcpu=i686 -rm -f junk.c junk.o -goto gccdebug - -:gccMtuneOk -echo GCC supports -mtune=pentium4 >>config.log -set mf=-mtune=pentium4 -rm -f junk.c junk.o - -:gccdebug -rem Check for DWARF-2 debug info support, else default to stabs -echo main(){} >junk.c -echo gcc -c -gdwarf-2 -g3 junk.c >>config.log -gcc -c -gdwarf-2 -g3 junk.c >>config.log 2>&1 -if not errorlevel 1 goto gccdwarf -echo The failed program was: >>config.log -type junk.c >>config.log -set dbginfo=-gstabs+ -rm -f junk.c junk.o -goto compilercheckdone - -:gccdwarf -echo GCC supports DWARF-2 >>config.log -set dbginfo=-gdwarf-2 -g3 -rm -f junk.c junk.o -goto compilercheckdone - -:clOk -set COMPILER=cl -rm -f junk.c junk.obj -echo Using 'MSVC' - -:compilercheckdone - -rem ---------------------------------------------------------------------- -rem Check for external image libraries. Since they are loaded -rem dynamically, the libraries themselves do not need to be present -rem at compile time, but the header files are required. - -set mingwflag= - -if (%nocygwin%) == (N) goto flagsOK -set mingwflag=-mno-cygwin - -:flagsOK - -if (%pngsupport%) == (N) goto pngDone - -echo Checking for libpng... -echo #include "png.h" >junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto havePng - -echo ...png.h not found, building without PNG support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_PNG= -goto :pngDone - -:havePng -echo ...PNG header available, building with PNG support. -set HAVE_PNG=1 - -:pngDone -rm -f junk.c junk.obj - -if (%tlssupport%) == (N) goto tlsDone - -rem this is a copy of the PNG detection -echo Checking for libgnutls... -echo #include "gnutls/gnutls.h" >junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveTls - -echo ...gnutls.h not found, building without TLS support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_GNUTLS= -goto :tlsDone - -:haveTls -echo ...GnuTLS header available, building with GnuTLS support. -set HAVE_GNUTLS=1 - -:tlsDone -rm -f junk.c junk.obj - -if (%libxml2support%) == (N) goto xml2Done - -echo Checking for libxml2.... -echo #include "libxml/HTMLparser.h" >junk.c -echo main(){} >>junk.c -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto havelibxml2 - -echo ...libxml/HTMLparser.h not found, building without libxml2 support -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_LIBXML2= -goto xml2Done - -:havelibxml2 -echo ...libxml2 header available, building with libxml2 support -set HAVE_LIBXML2=1 - -:xml2Done -rm -f junk.c junk.obj - -if (%jpegsupport%) == (N) goto jpegDone - -echo Checking for jpeg-6b... -echo #include "jconfig.h" >junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveJpeg - -echo ...jconfig.h not found, building without JPEG support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_JPEG= -goto :jpegDone - -:haveJpeg -echo ...JPEG header available, building with JPEG support. -set HAVE_JPEG=1 - -:jpegDone -rm -f junk.c junk.obj - -if (%gifsupport%) == (N) goto gifDone - -echo Checking for libgif... -rem giflib-5.0.0 needs size_t defined before gif_lib.h is included -rem redirection characters need to be protected from the shell -echo #include ^ >junk.c -echo #include "gif_lib.h" >>junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveGif - -echo ...gif_lib.h not found, building without GIF support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_GIF= -goto :gifDone - -:haveGif -echo ...GIF header available, building with GIF support. -set HAVE_GIF=1 - -:gifDone -rm -f junk.c junk.obj - -if (%tiffsupport%) == (N) goto tiffDone - -echo Checking for tiff... -echo #include "tiffio.h" >junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveTiff - -echo ...tiffio.h not found, building without TIFF support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_TIFF= -goto :tiffDone - -:haveTiff -echo ...TIFF header available, building with TIFF support. -set HAVE_TIFF=1 - -:tiffDone -rm -f junk.c junk.obj - -if (%xpmsupport%) == (N) goto xpmDone - -echo Checking for libXpm... -echo #define FOR_MSW 1 >junk.c -echo #include "X11/xpm.h" >>junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveXpm - -echo ...X11/xpm.h not found, building without XPM support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_XPM= -goto :xpmDone - -:haveXpm -echo ...XPM header available, building with XPM support. -set HAVE_XPM=1 - -:xpmDone -rm -f junk.c junk.obj - -if not (%svgsupport%) == (Y) goto :svgDone -echo Checking for librsvg... -echo #include "librsvg/rsvg.h" >junk.c -echo main (){} >>junk.c -rem -o option is ignored with cl, but allows result to be consistent. -echo %COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >>config.log -%COMPILER% %usercflags% %mingwflag% -c junk.c -o junk.obj >junk.out 2>>config.log -if exist junk.obj goto haveSvg - -echo ...librsvg/rsvg.h or dependencies not found, building without SVG support. -echo The failed program was: >>config.log -type junk.c >>config.log -set HAVE_RSVG= -goto :svgDone - -:haveSvg -echo ...librsvg header available, building with SVG support (EXPERIMENTAL). -set HAVE_RSVG=1 - -:svgDone -rm -f junk.c junk.obj junk.err junk.out - -rem Any distfiles provided for building distribution? If no, we're done. -if "(%HAVE_DISTFILES%)"=="()" goto :distFilesDone - -rem Any arguments to --distfiles specified? If no, we're done. -if not "%distfiles%"=="" goto :checkDistFiles -set distFilesOk=0 -echo No arguments specified for option --distfiles! -goto distfilesDone - -:checkDistFiles -echo Checking for distfiles... -rem Check if all specified distfiles exist -set fileNotFound= -for %%d in (%distfiles%) do if not exist %%d set fileNotFound=%%d -if not "%fileNotFound%"=="" goto distFilesNotFound - -set distFilesOK=1 -echo ...all distfiles found. -goto :distFilesDone - -:distFilesNotFound -set distFilesOk=0 -echo ...%fileNotFound% not found. -set distfiles= -goto :distfilesDone - -:distFilesDone -set fileNotFound= - -rem ---------------------------------------------------------------------- - -:genmakefiles -echo Generating makefiles -if %COMPILER% == gcc set MAKECMD=gmake -if %COMPILER% == cl set MAKECMD=nmake - -rem Pass on chosen settings to makefiles. -rem -rem The weird place we put the redirection is to make sure no extra -rem whitespace winds up at the end of the Make variables, since some -rem variables, e.g. INSTALL_DIR, cannot stand that. Yes, echo will -rem write the blanks between the end of command arguments and the -rem redirection symbol to the file. OTOH, we cannot put the -rem redirection immediately after the last character of the command, -rem because environment variable expansion can yield a digit there, -rem which will then be misinterpreted as the file descriptor to -rem redirect... -echo # Start of settings from configure.bat >config.settings ->>config.settings echo COMPILER=%COMPILER% -if not "(%mf%)" == "()" >>config.settings echo MCPU_FLAG=%mf% -if not "(%dbginfo%)" == "()" >>config.settings echo DEBUG_INFO=%dbginfo% -if (%nodebug%) == (Y) >>config.settings echo NODEBUG=1 -if (%noopt%) == (Y) >>config.settings echo NOOPT=1 -if (%profile%) == (Y) >>config.settings echo PROFILE=1 -if (%nocygwin%) == (Y) >>config.settings echo NOCYGWIN=1 -if not "(%prefix%)" == "()" >>config.settings echo INSTALL_DIR=%prefix% -if not "(%distfiles%)" == "()" >>config.settings echo DIST_FILES=%distfiles% -rem We go thru docflags because usercflags could be "-DFOO=bar" -something -rem and the if command cannot cope with this -for %%v in (%usercflags%) do if not (%%v)==() set docflags=Y -if (%docflags%)==(Y) >>config.settings echo USER_CFLAGS=%usercflags% -if (%docflags%)==(Y) >>config.settings echo ESC_USER_CFLAGS=%escusercflags% -for %%v in (%userldflags%) do if not (%%v)==() set doldflags=Y -if (%doldflags%)==(Y) >>config.settings echo USER_LDFLAGS=%userldflags% -for %%v in (%extrauserlibs%) do if not (%%v)==() set doextralibs=Y -if (%doextralibs%)==(Y) >>config.settings echo USER_LIBS=%extrauserlibs% -echo # End of settings from configure.bat>>config.settings -echo. >>config.settings - -copy config.nt config.tmp -echo. >>config.tmp -echo /* Start of settings from configure.bat. */ >>config.tmp -rem We write USER_CFLAGS and USER_LDFLAGS starting with a space to simplify -rem processing of compiler options in w32.c:get_emacs_configuration_options -if (%docflags%) == (Y) echo #define USER_CFLAGS " %escusercflags%" >>config.tmp -if (%doldflags%) == (Y) echo #define USER_LDFLAGS " %escuserldflags%" >>config.tmp -if (%profile%) == (Y) echo #define PROFILING 1 >>config.tmp -if (%enablechecking%) == (Y) echo #define ENABLE_CHECKING 1 >>config.tmp -if not "(%HAVE_PNG%)" == "()" echo #define HAVE_PNG 1 >>config.tmp -if not "(%HAVE_GNUTLS%)" == "()" echo #define HAVE_GNUTLS 1 >>config.tmp -if not "(%HAVE_LIBXML2%)" == "()" echo #define HAVE_LIBXML2 1 >>config.tmp -if not "(%HAVE_JPEG%)" == "()" echo #define HAVE_JPEG 1 >>config.tmp -if not "(%HAVE_GIF%)" == "()" echo #define HAVE_GIF 1 >>config.tmp -if not "(%HAVE_TIFF%)" == "()" echo #define HAVE_TIFF 1 >>config.tmp -if not "(%HAVE_XPM%)" == "()" echo #define HAVE_XPM 1 >>config.tmp -if "(%HAVE_RSVG%)" == "(1)" echo #define HAVE_RSVG 1 >>config.tmp - -echo /* End of settings from configure.bat. */ >>config.tmp - -Rem See if fc.exe returns a meaningful exit status. If it does, we -Rem might as well avoid unnecessary overwriting of config.h and epaths.h, -Rem since this forces recompilation of every source file. -if exist foo.bar del foo.bar -fc /b foo.bar foo.bar >nul 2>&1 -if not errorlevel 2 goto doCopy -fc /b config.tmp ..\src\config.h >nul 2>&1 -if errorlevel 1 goto doCopy -fc /b paths.h ..\src\epaths.h >nul 2>&1 -if not errorlevel 1 goto dontCopy - -:doCopy -copy config.tmp ..\src\config.h -copy paths.h ..\src\epaths.h - -:dontCopy -if exist config.tmp del config.tmp -copy /b config.settings+%MAKECMD%.defs+..\nt\makefile.w32-in ..\nt\makefile -if exist ..\admin\unidata copy /b config.settings+%MAKECMD%.defs+..\admin\unidata\makefile.w32-in ..\admin\unidata\makefile -copy /b config.settings+%MAKECMD%.defs+..\lib-src\makefile.w32-in ..\lib-src\makefile -copy /b config.settings+%MAKECMD%.defs+..\lib\makefile.w32-in ..\lib\makefile -copy /b config.settings+%MAKECMD%.defs+..\src\makefile.w32-in ..\src\makefile -copy /b config.settings+%MAKECMD%.defs+..\doc\emacs\makefile.w32-in ..\doc\emacs\makefile -copy /b config.settings+%MAKECMD%.defs+..\doc\misc\makefile.w32-in ..\doc\misc\makefile -copy /b config.settings+%MAKECMD%.defs+..\doc\lispref\makefile.w32-in ..\doc\lispref\makefile -copy /b config.settings+%MAKECMD%.defs+..\doc\lispintro\makefile.w32-in ..\doc\lispintro\makefile -if exist ..\lisp\makefile rm -f ../lisp/[Mm]akefile -copy /b config.settings+%MAKECMD%.defs+..\lisp\makefile.w32-in ..\lisp\makefile -rem Use the default (no-op) Makefile.in if the nt version is not present. -if exist ..\leim\makefile.w32-in copy /b config.settings+%MAKECMD%.defs+..\leim\makefile.w32-in ..\leim\makefile -if not exist ..\leim\makefile.w32-in copy /b config.settings+%MAKECMD%.defs+..\leim\Makefile.in ..\leim\makefile -del config.settings - -Rem Some people use WinZip which doesn't create empty directories! -if not exist ..\site-lisp\nul mkdir ..\site-lisp\ -Rem Update subdirs.el only if it is different or fc.exe doesn't work. -if exist foo.bar del foo.bar -fc /b foo.bar foo.bar >nul 2>&1 -if not errorlevel 2 goto doUpdateSubdirs -fc /b subdirs.el ..\site-lisp\subdirs.el >nul 2>&1 -if not errorlevel 1 goto dontUpdateSubdirs - -:doUpdateSubdirs -if exist ..\site-lisp\subdirs.el del ..\site-lisp\subdirs.el -copy subdirs.el ..\site-lisp\subdirs.el - -:dontUpdateSubdirs -echo. - -rem check that we have all the libraries we need. -set libsOK=1 - -if not "(%HAVE_XPM%)" == "()" goto checkpng -if (%xpmsupport%) == (N) goto checkpng - set libsOK=0 - echo XPM support is missing. It is required for color icons in the toolbar. - echo Install libXpm development files or use --without-xpm - -:checkpng -if not "(%HAVE_PNG%)" == "()" goto checkjpeg -if (%pngsupport%) == (N) goto checkjpeg - set libsOK=0 - echo PNG support is missing. - echo Install libpng development files or use --without-png - -:checkjpeg -if not "(%HAVE_JPEG%)" == "()" goto checktiff -if (%jpegsupport%) == (N) goto checktiff - set libsOK=0 - echo JPEG support is missing. - echo Install jpeg development files or use --without-jpeg - -:checktiff -if not "(%HAVE_TIFF%)" == "()" goto checkgif -if (%tiffsupport%) == (N) goto checkgif - set libsOK=0 - echo TIFF support is missing. - echo Install libtiff development files or use --without-tiff - -:checkgif -if not "(%HAVE_GIF%)" == "()" goto checkdistfiles -if (%gifsupport%) == (N) goto checkdistfiles - set libsOK=0 - echo GIF support is missing. - echo Install giflib or libungif development files or use --without-gif - -:checkdistfiles -if "(%HAVE_DISTFILES%)" == "()" goto donelibchecks -if (%distFilesOk%) == (1) goto donelibchecks -echo. -echo Files specified with option --distfiles could not be found. -echo Fix these issues before running make dist - -:donelibchecks -if (%libsOK%) == (1) goto success -echo. -echo Important libraries are missing. Fix these issues before running make. -goto end - -:success -echo Emacs successfully configured. -echo Emacs successfully configured. >>config.log -if (%MAKECMD%) == (gmake) set MAKECMD=make -echo Run `%MAKECMD%' to build, then run `%MAKECMD% install' to install. -goto end - -:SmallEnv -echo Your environment size is too small. Please enlarge it and rerun configure. -echo For example, type "command.com /e:2048" to have 2048 bytes available. -set $foo$= - -:end -set prefix= -set nodebug= -set noopt= -set enablechecking= -set profile= -set nocygwin= -set COMPILER= -set MAKECMD= -set usercflags= -set docflags= -set userldflags= -set doldflags= -set mingwflag= -set mf= -set distfiles= -set HAVE_DISTFILES= -set distFilesOk= -set pngsupport= -set tlssupport= -set libxml2support= -set jpegsupport= -set gifsupport= -set tiffsupport= -set xpmsupport= -set svgsupport= -set libsOK= -set HAVE_GIF= -set HAVE_JPEG= -set HAVE_PNG= -set HAVE_TIFF= -set HAVE_XPM= -set dbginfo= -endlocal -set use_extensions= diff --git a/nt/emacs-src.tags b/nt/emacs-src.tags deleted file mode 100644 index 8c18713345..0000000000 --- a/nt/emacs-src.tags +++ /dev/null @@ -1,6 +0,0 @@ - This file defines the regular expressions for etags to look for - in the src directory. It is used by the w32 build to work around - the annoyances of quoting command-line arguments with various - w32 shell. - -/[ ]*DEFVAR_[A-Z_ (]+"\([^"]+\)"/ diff --git a/nt/envadd.bat b/nt/envadd.bat deleted file mode 100644 index 21f0f4b08f..0000000000 --- a/nt/envadd.bat +++ /dev/null @@ -1,43 +0,0 @@ -rem Hack to change/add environment variables in the makefiles for the -rem Windows platform. - -rem Copyright (C) 2003-2015 Free Software Foundation, Inc. - -rem This file is part of GNU Emacs. - -rem GNU Emacs is free software: you can redistribute it and/or modify -rem it under the terms of the GNU General Public License as published by -rem the Free Software Foundation, either version 3 of the License, or -rem (at your option) any later version. - -rem GNU Emacs is distributed in the hope that it will be useful, -rem but WITHOUT ANY WARRANTY; without even the implied warranty of -rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -rem GNU General Public License for more details. - -rem You should have received a copy of the GNU General Public License -rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/. - - -rem Usage: -rem envadd "ENV1=VAL1" "ENV2=VAL2" ... /C -rem -rem The "/C" switch marks the end of environment variables, and the -rem beginning of the command line. -rem -rem By Peter 'Luna' Runestig 2003 - -:Loop -if .%1% == ./C goto EndLoop -rem just to avoid an endless loop: -if .%1% == . goto EndLoop -set %1 -shift -goto Loop -:EndLoop - -rem Eat the "/C" -shift -rem Now, run the command line -%1 %2 %3 %4 %5 %6 %7 %8 %9 - diff --git a/nt/gmake.defs b/nt/gmake.defs deleted file mode 100644 index 90a3709da4..0000000000 --- a/nt/gmake.defs +++ /dev/null @@ -1,333 +0,0 @@ -# -*- Makefile -*- definition file for building GNU Emacs on Windows NT. -# Copyright (C) 2000-2015 Free Software Foundation, Inc. - -# This file is part of GNU Emacs. - -# GNU Emacs is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# GNU Emacs is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with GNU Emacs. If not, see . - -# Ensure 'all' is the default target -all: - -# NOTES -# -# I tried to force gmake to use the native shell for simplicity, by -# setting SHELL as below, but this didn't work reliably because of -# various case sensitivity niggles. Specifically, COMSPEC (which is in -# fact usually spelled ComSpec on NT, to make life difficult) typically -# references "cmd.exe" (on NT) when the file is actually called -# "CMD.EXE" on disk for hysterical raisons. As a result, GNU make -# thinks it doesn't exist (unless compiled with a switch to ignore -# case), and so doesn't change which shell it will invoke to execute -# commands. -# -# It would be possible, though very tedious using just gmake facilities, -# to convert the COMSPEC value to uppercase to solve this problem, but -# it isn't worth it. That is partly because, even when using the native -# shell, gmake tends to not be happy with backslashes in command -# strings. The obvious solution is to use forward slashes as much as -# possible, which can be made to work most of the time (putting -# filenames in quotes often helps), but there are still some internal -# cmd.exe commands like `del' and `copy' that won't work with them. -# Although it is possible to convert slashes to backslashes when -# necessary, gmake requires explicitly calling its subst function, which -# nmake does not understand). For this reason, it is simplest to -# mandate that rm and cp be available, so we can use Unix-format file -# names everywhere. (Fortunately both MS and GNU make, and the -# respective compilers, are happy with Unix-format names.) -# -# Since we cannot easily force the choice of a particular shell, we must -# make the effort to cope with whichever shell is being used. -# Fortunately, the only command we need to use that is shell specific is -# the testing of a file's existence for the purpose of working out when -# we are copying files to their original location. That particular -# requirement is abstracted easily enough. -# -# The only other problem area was the change of directory when running -# temacs to dump emacs.exe (where gmake doesn't support cd foo in any -# useful way), but that has been resolved by modifying the Windows -# unexec function slightly to not require the directory change while -# still allowing objects and binaries to be in subdirectories. - -# This doesn't work. -#SHELL:=$(COMSPEC) - -# Determine whether make is using sh or cmd/command as shell; cmd.exe -# will output "ECHO is on" when echo is given by itself, while sh will -# not produce any output. -sh_output := $(shell echo) -ifeq "$(findstring ECHO, $(sh_output))" "ECHO" -THE_SHELL = $(COMSPEC)$(ComSpec) -SHELLTYPE=CMD -SWITCHCHAR=/ -else -USING_SH = 1 -THE_SHELL = $(SHELL) -SHELLTYPE=SH -# MSYS needs to double the slash in cmd-style switches to avoid -# interpreting /x as a Posix style file name reference -ifneq ($(MSYSTEM),) -SWITCHCHAR=// -else -SWITCHCHAR=/ -endif -endif - -MAKETYPE=gmake - -# The following "ifeq" does not appear to DTRT, and therefore breaks -# the build on mingw32. Also the -m option does not exist in many -# (reasonably recent even) versions of Cygwin. These issues need to be -# remedied before putting this cygpath kludge back in. - -# Convert CURDIR to native file name, if in Cygwin format -#ifeq "$(shell cygpath $(CURDIR))" "$(CURDIR)" -#CURDIR := $(shell cygpath -m $(CURDIR)) -#endif - -THISDIR = . - -# Cygwin has changed quoting rules somewhat since b20, in a way that -# affects makefiles using sh as the command processor, so we need to -# detect which rules to use. -ifdef USING_SH -sh_output := $(shell echo [Please ignore a syntax error on the next line - it is intentional] 1>&2) -sh_output := $(shell echo foo") -# This single quote " is to fix fontification due to previous line -ifeq "$(sh_output)" "" -NEW_CYGWIN = 1 -endif - -# By default, newer versions of Cygwin mess with NTFS ACLs in an -# attempt to emulate traditional posix file permissions. This can -# cause bad effects, such as .exe files that are missing the -# FILE_EXECUTE/FILE_GENERIC_EXECUTE permissions when they are created -# with Cygwin commands that don't expect to be creating executable -# files. Then when we later use a non-Cygwin program to create the -# real .exe, the previous Cygwin defined ACL sticks. -CYGWIN=nontsec -export CYGWIN -endif - -ALL_DEPS = $^ -EMPTY = -SPACE = $(EMPTY) $(EMPTY) - -SUBSYSTEM_WINDOWS=-Wl,-subsystem,windows -SUBSYSTEM_CONSOLE=-Wl,-subsystem,console - -# INSTALL_DIR is the directory into which emacs will be installed. -# -ifndef INSTALL_DIR -INSTALL_DIR = $(CURDIR)/.. -endif - -export EMACSLOADPATH - -# Determine the architecture we're running on. -# Define ARCH for our purposes; -# Define CPU for use by ntwin32.mak; -# Define CONFIG_H to the appropriate config.h for the system; -# -ifdef PROCESSOR_ARCHITECTURE -# We're on Windows NT -CPU = $(PROCESSOR_ARCHITECTURE) -CONFIG_H = config.nt -OS_TYPE = windowsnt - ifeq "$(PROCESSOR_ARCHITECTURE)" "x86" -ARCH = i386 -CPU = i386 -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-x86.manifest - else - ifeq "$(PROCESSOR_ARCHITECTURE)" "MIPS" -ARCH = mips -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-mips.manifest - else - ifeq "$(PROCESSOR_ARCHITECTURE)" "ALPHA" -ARCH = alpha -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-alpha.manifest - else - ifeq "$(PROCESSOR_ARCHITECTURE)" "PPC" -ARCH = ppc -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-ppc.manifest - else - $(error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)") - endif - endif - endif - endif -else -# We're on Windows 95 -ARCH = i386 -CPU = i386 -CONFIG_H = config.nt -OS_TYPE = windows95 -endif - -AR = ar -rsc -AR_OUT = -CC = gcc -CC_OUT = -o$(SPACE) -LINK = gcc -LINK_OUT = -o$(SPACE) -RC = windres -O coff -RC_OUT = -o$(SPACE) -RC_INCLUDE = --include-dir$(SPACE) - -libc = -baselibs = -O = o -A = a - -BASE_LIBS = $(libc) $(baselibs) - -ADVAPI32 = -ladvapi32 -COMCTL32 = -lcomctl32 -COMDLG32 = -lcomdlg32 -GDI32 = -lgdi32 -MPR = -lmpr -SHELL32 = -lshell32 -USER32 = -luser32 -WSOCK32 = -lwsock32 -WINMM = -lwinmm -WINSPOOL = -lwinspool -OLE32 = -lole32 -UNISCRIBE = -lusp10 -UUID = -luuid - -# Used by src/makefile.w32-in, since Nmake barfs on $(func SOMETHING) -OBJ0_c = $(patsubst $(BLD)%.$(O),$(CURDIR)%.c,$(OBJ0)) -OBJ1_c = $(patsubst $(BLD)%.$(O),$(CURDIR)%.c,$(OBJ1)) -OBJ2_c = $(patsubst $(BLD)%.$(O),$(CURDIR)%.c,$(OBJ2)) - -ifdef NOOPT -DEBUG_CFLAGS = -DEMACSDEBUG -fno-crossjumping -std=gnu99 -else -DEBUG_CFLAGS = -endif - -MWINDOWS = -mwindows - -CFLAGS = -I. $(ARCH_CFLAGS) $(DEBUG_CFLAGS) $(PROFILE_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS) -ESC_CFLAGS = -I. $(ARCH_CFLAGS) $(DEBUG_CFLAGS) $(PROFILE_CFLAGS) $(ESC_USER_CFLAGS) $(LOCAL_FLAGS) -EMACS_EXTRA_C_FLAGS = -DUSE_CRT_DLL=1 - -ifdef PROFILE -PROFILE_CFLAGS = -pg -PROFILE_LDFLAGS = -pg -else -PROFILE_CFLAGS = -PROFILE_LDFLAGS = -endif - - -# see comments in allocate_heap in w32heap.c before changing any of the -# -stack, -heap, or -image-base settings. -TEMACS_EXTRA_LINK = -Wl,-stack,0x00800000 -Wl,-heap,0x00100000 -Wl,-image-base,0x01000000 $(SUBSYSTEM_CONSOLE) -Wl,-entry,__start -Wl,-Map,$(BLD)/temacs.map - -ifdef NOOPT -OBJDIR = oo -else -OBJDIR = oo-spd -endif -$(OBJDIR):; -mkdir "$(OBJDIR)" -BLD = $(OBJDIR)/$(ARCH) -stamp_BLD: $(OBJDIR) - -mkdir "$(BLD)" - echo $(BLD) > $@ - -COMPILER_TEMP_FILES = - -CP = cp -f -CP_DIR = cp -rf -DEL = rm -DEL_TREE = rm -r - -DIRNAME = $(notdir $(CURDIR)) - -ifdef USING_SH - -IFNOTSAMEDIR = if [ ! -s ../$(DIRNAME)_same-dir.tst ] ; then -FOREACH = for f in -FORVAR = $${f} -FORDO = ; do -ENDFOR = ; done -ENDIF = ; fi -ARGQUOTE = ' -ifdef NEW_CYGWIN -DQUOTE = " -else -DQUOTE = "" -endif - -else - -IFNOTSAMEDIR = if not exist ../$(DIRNAME)_same-dir.tst -FOREACH = for %%f in ( -FORVAR = %%f -FORDO = ) do -ENDFOR = -ENDIF = -ARGQUOTE = " -DQUOTE = \" - -endif - -ifdef NODEBUG -DEBUG_FLAG = -DEBUG_LINK = -else -DEBUG_FLAG = $(DEBUG_INFO) -DEBUG_LINK = $(DEBUG_INFO) -endif - -ifdef NOCYGWIN -NOCYGWIN = -mno-cygwin -endif - -ifdef USER_LIBS -USER_LIBS := $(patsubst %,-l%,$(USER_LIBS)) -endif - -PRAGMA_SYSTEM_HEADER = \#pragma GCC system_header - -ifeq "$(ARCH)" "i386" -ifdef NOOPT -ARCH_CFLAGS = -c $(DEBUG_FLAG) $(NOCYGWIN) -else -ARCH_CFLAGS = -c $(DEBUG_FLAG) $(NOCYGWIN) $(MCPU_FLAG) -O2 \ - # -fbuiltin \ - # -finline-functions \ - # -fomit-frame-pointer -endif -ARCH_LDFLAGS = $(SYS_LDFLAGS) -else -ERROR Unknown architecture type "$(ARCH)". -endif - -LINK_FLAGS = $(ARCH_LDFLAGS) $(DEBUG_LINK) $(PROFILE_LDFLAGS) $(NOCYGWIN) $(USER_LDFLAGS) - -export XMFLAGS - -.DEFAULT: - -$(BLD)/%.o: %.c - $(CC) $(CFLAGS) $(CC_OUT)$@ $< diff --git a/nt/makefile.w32-in b/nt/makefile.w32-in deleted file mode 100644 index ff2bf27cde..0000000000 --- a/nt/makefile.w32-in +++ /dev/null @@ -1,465 +0,0 @@ -# -*- Makefile -*- for GNU Emacs on the Microsoft Windows API. -# Copyright (C) 2000-2015 Free Software Foundation, Inc. -# -# Top level makefile for building GNU Emacs on Windows NT -# -# This file is part of GNU Emacs. - -# GNU Emacs is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# GNU Emacs is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with GNU Emacs. If not, see . - - -# FIXME: This file uses DOS EOLs. Convert to Unix after 22.1 is out -# (and remove or replace this comment). - -VERSION = 25.0.50 - -TMP_DIST_DIR = emacs-$(VERSION) - -TRES = $(BLD)/emacs.res -CLIENTRES = $(BLD)/emacsclient.res - -LOCAL_FLAGS = -DOLD_PATHS=1 - -XMFLAGS = - -ALL = $(BLD)/addpm.exe $(BLD)/ddeclient.exe $(BLD)/runemacs.exe \ - $(BLD)/cmdproxy.exe $(BLD)/addsection.exe $(BLD)/preprep.exe - -$(BLD)/addpm.exe: $(BLD)/addpm.$(O) - $(LINK) $(LINK_OUT)$@ \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) $(ADVAPI32) \ - $(USER32) $(OLE32) $(UUID) $(SHELL32) - -$(BLD)/ddeclient.exe: $(BLD)/ddeclient.$(O) - $(LINK) $(LINK_OUT)$@ \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) $(ADVAPI32) $(USER32) - -$(BLD)/cmdproxy.exe: $(BLD)/cmdproxy.$(O) - $(LINK) $(LINK_OUT)$@ \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) $(USER32) - -$(BLD)/addsection.exe: $(BLD)/addsection.$(O) - $(LINK) $(LINK_OUT)$@ \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) $(USER32) - -$(BLD)/preprep.exe: $(BLD)/preprep.$(O) - $(LINK) $(LINK_OUT)$@ \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) - -# -# The resource file. NT 3.10 requires the use of cvtres; even though -# it is not necessary on later versions, it is still ok to use it. -# -$(TRES): emacs.rc icons/emacs.ico $(EMACS_MANIFEST) stamp_BLD - $(RC) $(RC_OUT)$(TRES) emacs.rc - -$(CLIENTRES): emacsclient.rc stamp_BLD - $(RC) $(RC_OUT)$(CLIENTRES) emacsclient.rc - -$(BLD)/runemacs.exe: $(BLD)/runemacs.$(O) $(TRES) - $(LINK) $(LINK_OUT)$@ $(SUBSYSTEM_WINDOWS) \ - $(LINK_FLAGS) $(ALL_DEPS) $(BASE_LIBS) $(ADVAPI32) $(USER32) - -which-sh: - @echo Using $(THE_SHELL) as shell. - -# These depend on stamp_BLD to make sure the $(BLD) directory is created -# before the compilation begins, even if Make runs several commands -# in parallel under "make -j". -# -$(BLD)/addpm.$(O) $(BLD)/ddeclient.$(O) $(BLD)/runemacs.$(O) $(BLD)/cmdproxy.$(O) $(BLD)/addsection.$(O) $(BLD)/preprep.$(O): stamp_BLD - -# -# Build emacs -# -all: which-sh $(ALL) $(CLIENTRES) all-other-dirs-$(MAKETYPE) - -all-other-dirs-$(MAKETYPE): maybe-bootstrap - -all-other-dirs-nmake: $(BLD)/addsection.exe - cd ..\lib - $(MAKE) $(MFLAGS) all - cd ..\lib-src - $(MAKE) $(MFLAGS) all - cd ..\src - $(MAKE) $(MFLAGS) all - cd ..\lisp - $(MAKE) $(MFLAGS) all - cd ..\leim - $(MAKE) $(MFLAGS) all - cd ..\nt - -all-other-dirs-gmake: $(BLD)/addsection.exe - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../leim all - -recompile: recompile-$(MAKETYPE) - -recompile-nmake: - cd ..\lisp - $(MAKE) $(MFLAGS) recompile - cd ..\nt - -recompile-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp recompile - -#### Bootstrapping. - -### This is meant for Emacs maintainers only. It first cleans the -### lisp subdirectory, removing all compiled Lisp files. Then a -### special emacs executable is built from Lisp sources, which is then -### used to compile Lisp files. The last step is a "normal" make. - -maybe-bootstrap: maybe-bootstrap-$(SHELLTYPE) - -# dummy target to force other targets to be evaluated. -doit: - -maybe-bootstrap-CMD: doit - @echo . - @if not EXIST ..\lisp\abbrev.elc echo Essential Lisp files seem to be missing. You should either - @if not EXIST ..\lisp\abbrev.elc echo do 'make bootstrap' or create 'lisp/abbrev.elc' somehow - @echo . - @if not EXIST ..\lisp\abbrev.elc exit -1 - -maybe-bootstrap-SH: doit - @if [ ! -f ../lisp/abbrev.elc ] ; then \ - echo; \ - echo "Essential Lisp files seem to be missing. You should either"; \ - echo "do \`make bootstrap' or create \`lisp/abbrev.elc' somehow."; \ - echo; \ - exit -1; \ - fi - -# Bootstrap depends on cmdproxy because some Lisp functions -# loaded during bootstrap may need to run shell commands. -bootstrap: $(BLD)/addsection.exe $(BLD)/cmdproxy.exe bootstrap-$(MAKETYPE) - $(MAKE) $(MFLAGS) $(XMFLAGS) all - -bootstrap-nmake: $(BLD)/addsection.exe $(BLD)/cmdproxy.exe - cd ..\lisp - $(MAKE) $(MFLAGS) bootstrap-clean - cd ..\src - $(MAKE) $(MFLAGS) clean - cd ..\lib-src - $(MAKE) $(MFLAGS) clean make-docfile - cd ..\lib - $(MAKE) $(MFLAGS) clean all - cd ..\src - $(MAKE) $(MFLAGS) bootstrap - $(MAKE) $(MFLAGS) bootstrap-clean - cd ..\nt - $(CP) $(BLD)/cmdproxy.exe ../bin - cd ..\lisp - $(MAKE) $(MFLAGS) SHELL=$(SHELLTYPE) bootstrap - cd ..\lib-src - $(MAKE) $(MFLAGS) DOC - cd ..\nt - -bootstrap-gmake: $(BLD)/addsection.exe $(BLD)/cmdproxy.exe - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp bootstrap-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src make-docfile - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src bootstrap - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src bootstrap-clean - $(CP) $(BLD)/cmdproxy.exe ../bin - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp bootstrap - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src DOC - -bootstrap-clean: bootstrap-clean-$(MAKETYPE) - -bootstrap-clean-nmake: - cd ..\src - $(MAKE) $(MFLAGS) bootstrap-clean - cd ..\lib - $(MAKE) $(MFLAGS) clean - cd ..\lisp - $(MAKE) $(MFLAGS) bootstrap-clean - -bootstrap-clean-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src bootstrap-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp bootstrap-clean - -$(INSTALL_DIR): - - mkdir "$(INSTALL_DIR)" - -$(INSTALL_DIR)/bin: $(INSTALL_DIR) - - mkdir "$(INSTALL_DIR)/bin" - -# -# Build and install emacs in INSTALL_DIR -# -.PHONY: install-bin install-shortcuts - -install: install-bin install-shortcuts - -install-bin: all $(INSTALL_DIR)/bin install-other-dirs-$(MAKETYPE) - - $(CP) $(BLD)/ddeclient.exe $(INSTALL_DIR)/bin - - $(CP) $(BLD)/cmdproxy.exe $(INSTALL_DIR)/bin - - $(CP) $(BLD)/runemacs.exe $(INSTALL_DIR)/bin - - $(CP) README.W32 $(INSTALL_DIR) - - $(DEL) ../$(DIRNAME)_same-dir.tst - - $(DEL) $(INSTALL_DIR)/$(DIRNAME)_same-dir.tst - echo SameDirTest > "$(INSTALL_DIR)/$(DIRNAME)_same-dir.tst" - - mkdir "$(INSTALL_DIR)/etc" - - mkdir "$(INSTALL_DIR)/info" - - mkdir "$(INSTALL_DIR)/lock" - - mkdir "$(INSTALL_DIR)/data" - - mkdir "$(INSTALL_DIR)/site-lisp" - - mkdir "$(INSTALL_DIR)/etc/icons" - $(IFNOTSAMEDIR) $(CP) ../site-lisp/subdirs.el $(INSTALL_DIR)/site-lisp $(ENDIF) - $(IFNOTSAMEDIR) $(CP_DIR) ../etc $(INSTALL_DIR) $(ENDIF) - - $(CP_DIR) icons $(INSTALL_DIR)/etc - $(IFNOTSAMEDIR) $(CP_DIR) ../info $(INSTALL_DIR) $(ENDIF) - $(IFNOTSAMEDIR) $(CP) ../COPYING $(INSTALL_DIR) $(ENDIF) - - $(CP) ../COPYING $(INSTALL_DIR)/bin - - $(DEL) ../$(DIRNAME)_same-dir.tst - - $(DEL) $(INSTALL_DIR)/$(DIRNAME)_same-dir.tst - -install-other-dirs-nmake: all - cd ..\lib-src - $(MAKE) $(MFLAGS) install - cd ..\src - $(MAKE) $(MFLAGS) install - cd ..\lisp - $(MAKE) $(MFLAGS) install - cd ..\leim - $(MAKE) $(MFLAGS) install - cd ..\nt - -install-other-dirs-gmake: all - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src install - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src install - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp install - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../leim install - -install-addpm: $(INSTALL_DIR)/bin $(BLD)/addpm.exe - - $(CP) $(BLD)/addpm.exe $(INSTALL_DIR)/bin - -install-shortcuts: install-addpm - "$(INSTALL_DIR)/bin/addpm" -q - -maybe-copy-distfiles: maybe-copy-distfiles-$(SHELLTYPE) - -maybe-copy-distfiles-CMD: create-tmp-dist-dir doit - @if not $(ARGQUOTE)$(DIST_FILES)$(ARGQUOTE) == "" $(CP_DIR) $(DIST_FILES) $(TMP_DIST_DIR)/bin - -maybe-copy-distfiles-SH: create-tmp-dist-dir doit - @if [ ! $(ARGQUOTE)$(DIST_FILES)$(ARGQUOTE) == "" ] ; then \ - $(CP_DIR) $(DIST_FILES) $(TMP_DIST_DIR)/bin ; \ - fi - -create-tmp-dist-dir: - mkdir "$(TMP_DIST_DIR)" -# Also create bin directory for dist files. - mkdir "$(TMP_DIST_DIR)/bin" - -dist: install-bin install-addpm maybe-copy-distfiles - $(CP) "$(INSTALL_DIR)/BUGS" $(TMP_DIST_DIR) - $(CP) "$(INSTALL_DIR)/COPYING" $(TMP_DIST_DIR) - $(CP) "$(INSTALL_DIR)/README" $(TMP_DIST_DIR) - $(CP) "$(INSTALL_DIR)/README.W32" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/bin" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/etc" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/info" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/lisp" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/leim" $(TMP_DIST_DIR) - $(CP_DIR) "$(INSTALL_DIR)/site-lisp" $(TMP_DIST_DIR) - $(COMSPEC)$(ComSpec) /c $(ARGQUOTE)zipdist.bat $(VERSION)$(ARGQUOTE) - $(DEL_TREE) $(TMP_DIST_DIR) - -force-info: -# Note that doc/emacs/makefile knows how to -# put the info files in $(infodir), -# so we can do ok running make in the build dir. -info: force-info info-$(MAKETYPE) - -info-nmake: - cd ..\doc\emacs - $(MAKE) $(MFLAGS) info - cd ..\misc - $(MAKE) $(MFLAGS) info - cd ..\lispref - $(MAKE) $(MFLAGS) info - cd ..\lispintro - $(MAKE) $(MFLAGS) info - cd $(MAKEDIR) - -info-gmake: emacs misc lispref lispintro - -emacs misc lispref lispintro: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/$@ info - -# -# Maintenance -# -clean: clean-other-dirs-$(MAKETYPE) - - $(DEL) $(COMPILER_TEMP_FILES) - - $(DEL_TREE) $(OBJDIR) - - $(DEL) stamp_BLD - - $(DEL) ../etc/DOC - -clean-other-dirs-nmake: - cd ..\lib - $(MAKE) $(MFLAGS) clean - cd ..\lib-src - $(MAKE) $(MFLAGS) clean - cd ..\src - $(MAKE) $(MFLAGS) clean - cd ..\doc\lispintro - $(MAKE) $(MFLAGS) clean - cd ..\lispref - $(MAKE) $(MFLAGS) clean - cd ..\..\leim - $(MAKE) $(MFLAGS) clean - cd ..\doc\emacs - $(MAKE) $(MFLAGS) clean - cd ..\misc - $(MAKE) $(MFLAGS) clean - cd ..\..\nt - -clean-other-dirs-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../leim clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/emacs clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/misc clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispintro clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispref clean - -cleanall-other-dirs-nmake: - cd ..\lib - $(MAKE) $(MFLAGS) cleanall - cd ..\lib-src - $(MAKE) $(MFLAGS) cleanall - cd ..\src - $(MAKE) $(MFLAGS) cleanall - cd ..\nt - -cleanall-other-dirs-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib cleanall - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src cleanall - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src cleanall - -# We used to delete *~ here, but that might inadvertently remove -# precious files if it happens to match their short 8+3 aliases. -cleanall: clean cleanall-other-dirs-$(MAKETYPE) - - $(DEL_TREE) obj - - $(DEL_TREE) obj-spd - - $(DEL_TREE) oo - - $(DEL_TREE) oo-spd - -top-distclean: - - $(DEL) $(COMPILER_TEMP_FILES) - - $(DEL_TREE) obj - - $(DEL_TREE) obj-spd - - $(DEL_TREE) oo - - $(DEL_TREE) oo-spd - - $(DEL) stamp_BLD - - $(DEL) ../etc/DOC - - $(DEL) config.log Makefile - - $(DEL) ../README.W32 - -distclean: distclean-other-dirs-$(MAKETYPE) top-distclean - -distclean-other-dirs-nmake: - cd ..\lib - $(MAKE) $(MFLAGS) distclean - cd ..\lib-src - $(MAKE) $(MFLAGS) distclean - cd ..\src - $(MAKE) $(MFLAGS) distclean - cd ..\lisp - $(MAKE) $(MFLAGS) distclean - cd ..\leim - $(MAKE) $(MFLAGS) distclean - cd ..\doc\emacs - $(MAKE) $(MFLAGS) distclean - cd ..\misc - $(MAKE) $(MFLAGS) distclean - cd ..\lispintro - $(MAKE) $(MFLAGS) distclean - cd ..\lispref - $(MAKE) $(MFLAGS) distclean - cd ..\..\nt - -distclean-other-dirs-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../leim distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/emacs distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/misc distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispintro distclean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispref distclean - -maintainer-clean: maintainer-clean-other-dirs-$(MAKETYPE) top-distclean - -maintainer-clean-other-dirs-nmake: - cd ..\lib - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\lib-src - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\src - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\lisp - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\leim - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\doc\emacs - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\misc - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\lispintro - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\lispref - $(MAKE) $(MFLAGS) maintainer-clean - cd ..\..\nt - -maintainer-clean-other-dirs-gmake: - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lib-src maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../src maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../lisp maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../leim maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/emacs maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/misc maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispintro maintainer-clean - $(MAKE) $(MFLAGS) $(XMFLAGS) -C ../doc/lispref maintainer-clean - -realclean: cleanall - - $(DEL_TREE) ../bin - -TAGS: TAGS-$(MAKETYPE) - -frc: -TAGS-gmake: frc - ../lib-src/$(BLD)/etags $(CURDIR)/*.c - $(MAKE) $(MFLAGS) -C ../src TAGS TAGS-LISP - $(MAKE) $(MFLAGS) -C ../lib-src TAGS - $(MAKE) $(MFLAGS) -C ../lib TAGS - -TAGS-nmake: - echo This target is not supported with NMake - -.PHONY: frc diff --git a/nt/multi-install-info.bat b/nt/multi-install-info.bat deleted file mode 100644 index f69ee485c1..0000000000 --- a/nt/multi-install-info.bat +++ /dev/null @@ -1,40 +0,0 @@ -@echo off - -rem Hack to run install-info with multiple info files on the command -rem line on the Windows platform. - -rem Copyright (C) 2003-2015 Free Software Foundation, Inc. - -rem This file is part of GNU Emacs. - -rem GNU Emacs is free software: you can redistribute it and/or modify -rem it under the terms of the GNU General Public License as published by -rem the Free Software Foundation, either version 3 of the License, or -rem (at your option) any later version. - -rem GNU Emacs is distributed in the hope that it will be useful, -rem but WITHOUT ANY WARRANTY; without even the implied warranty of -rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -rem GNU General Public License for more details. - -rem You should have received a copy of the GNU General Public License -rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/. - - -rem Usage: -rem multi-install-info FILE1 FILE2 ... -rem -rem By Peter 'Luna' Runestig 2003 - -set INSTALL_INFO=install-info -set II_SWITCH=%1=%2 -rem Eat the install-info switch: -shift - -:Loop -shift -if .%1% == . goto EndLoop -%INSTALL_INFO% %II_SWITCH% %1 -goto Loop -:EndLoop - diff --git a/nt/nmake.defs b/nt/nmake.defs deleted file mode 100644 index 5424b9d912..0000000000 --- a/nt/nmake.defs +++ /dev/null @@ -1,294 +0,0 @@ -# -*- Makefile -*- definition file for building GNU Emacs on Windows NT. -# Copyright (C) 2000-2015 Free Software Foundation, Inc. - -# This file is part of GNU Emacs. - -# GNU Emacs is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# GNU Emacs is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with GNU Emacs. If not, see . - - -# Ensure 'all' is the default target -all: - -THE_SHELL = $(COMSPEC) -SHELLTYPE=CMD -SWITCHCHAR=/ - -MAKETYPE=nmake - -CURDIR = $(MAKEDIR:\=/) -THISDIR = $(MAKEDIR) -DIRNAME = - -ALL_DEPS = $** - -SUBSYSTEM_WINDOWS=-subsystem:windows -SUBSYSTEM_CONSOLE=-subsystem:console - -# INSTALL_DIR is the directory into which emacs will be installed. -# -!ifndef INSTALL_DIR -INSTALL_DIR = $(CURDIR)/.. -!endif - -# Ensure EMACSLOADPATH is defined in the environment. -# -!if [set EMACSLOADPATH=foo] -!endif - -# Allow detection of builds with MSVC 5 or later, so we can -# speed up compiles (see rule at end). -# -_NMAKE_VER_5=162 -_NMAKE_VER_4=0 - -!IFNDEF _NMAKE_VER -_NMAKE_VER=$(_NMAKE_VER_4) -!ENDIF - -# Check that the INCLUDE and LIB environment variables are set. -# -!ifndef INCLUDE -!error The INCLUDE environment variable needs to be set. -!endif -!ifndef LIB -!error The LIB environment variable needs to be set. -!endif - -# Determine the architecture we're running on. -# Define ARCH for our purposes; -# Define CPU for use by ntwin32.mak; -# Define CONFIG_H to the appropriate config.h for the system; -# -!ifdef PROCESSOR_ARCHITECTURE -# We're on Windows NT -CPU = $(PROCESSOR_ARCHITECTURE) -CONFIG_H = config.nt -OS_TYPE = windowsnt -! if "$(PROCESSOR_ARCHITECTURE)" == "x86" -ARCH = i386 -CPU = i386 -! else -! if "$(PROCESSOR_ARCHITECTURE)" == "MIPS" -ARCH = mips -! else -! if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA" -ARCH = alpha -! else -! if "$(PROCESSOR_ARCHITECTURE)" == "PPC" -ARCH = ppc -! else -! if "$(PROCESSOR_ARCHITECTURE)" == "AMD64" -ARCH = AMD64 -! else -! error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)" -! endif -! endif -! endif -! endif -! endif -!else -# We're on Windows 95 -ARCH = i386 -CPU = i386 -CONFIG_H = config.nt -OS_TYPE = windows95 -!endif - -AR = lib -AR_OUT = -out: -CC = cl -CC_OUT = -Fo -LINK = link -LINK_OUT = -out: -RC = rc $(ARCH_RCFLAGS) -RC_OUT = -Fo -RC_INCLUDE = -i - -USE_CRT_DLL = 1 - -!if $(USE_CRT_DLL) -libc = msvcrt$(D).lib -EMACS_EXTRA_C_FLAGS= -D_DLL -D_MT -DUSE_CRT_DLL=1 -!else -libc = libcmt$(D).lib -EMACS_EXTRA_C_FLAGS= -D_MT -!endif -baselibs = -O = obj -A = lib - -BASE_LIBS = $(libc) $(baselibs) oldnames.lib - -ADVAPI32 = advapi32.lib -COMCTL32 = comctl32.lib -COMDLG32 = comdlg32.lib -GDI32 = gdi32.lib -MPR = mpr.lib -SHELL32 = shell32.lib -USER32 = user32.lib -WSOCK32 = wsock32.lib -WINMM = winmm.lib -WINSPOOL = winspool.lib -OLE32 = ole32.lib -UNISCRIBE = usp10.lib -UUID = uuid.lib - -!ifdef NOOPT -DEBUG_CFLAGS = -DEMACSDEBUG -!else -DEBUG_CFLAGS = -!endif - -MWINDOWS = -subsystem:windows -entry:mainCRTStartup - -CFLAGS = -I. $(ARCH_CFLAGS) -D_CRT_SECURE_NO_WARNINGS \ - $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS) -ESC_CFLAGS = -I. $(ARCH_CFLAGS) -D_CRT_SECURE_NO_WARNINGS \ - $(DEBUG_CFLAGS) $(ESC_USER_CFLAGS) $(LOCAL_FLAGS) - -#SYS_LDFLAGS = -nologo -release -incremental:no -version:3.10 -swaprun:cd -swaprun:net setargv.obj -SYS_LDFLAGS = -nologo -manifest -dynamicbase:no -incremental:no -version:3.10 -swaprun:cd -swaprun:net setargv.obj - -# see comments in allocate_heap in w32heap.c before changing any of the -# -stack, -heap, or -base settings. -!if "$(ARCH)" == "i386" -TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x01000000 -pdb:$(BLD)\temacs.pdb -machine:x86 $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK) -!elseif "$(ARCH)" == "AMD64" -TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x400000000 -pdb:$(BLD)\temacs.pdb -machine:x64 $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK) -!endif - -!ifdef NOOPT -OBJDIR = obj -!else -OBJDIR = obj-spd -!endif -$(OBJDIR):; -mkdir $(OBJDIR) -BLD = $(OBJDIR)/$(ARCH) -stamp_BLD: $(OBJDIR) - -mkdir "$(BLD)" - echo $(BLD) > $@ - -COMPILER_TEMP_FILES = *.pdb - -CP = cp -f -CP_DIR = cp -rf -IFNOTSAMEDIR = if not exist ..\$(DIRNAME)_same-dir.tst -ENDIF = -FOREACH = for %%f in ( -FORVAR = %%f -FORDO = ) do -ENDFOR = -ARGQUOTE = " -# " -DQUOTE = \" -DEL = rm -DEL_TREE = rm -r - -!ifdef NODEBUG -DEBUG_FLAG = -DEBUG_LINK = -D = -!else -DEBUG_FLAG = -Zi -DEBUG_LINK = -debug -D = d -!endif - -# gcc-specific pragma (ignore for MSVC) -PRAGMA_SYSTEM_HEADER = - -!if "$(ARCH)" == "i386" -!ifdef NOOPT -#ARCH_CFLAGS = -nologo -c -Zel -W2 -H63 -Od -G3d -Zp8 $(DEBUG_FLAG) -ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zl -Zp8 -W2 -Od -Gd $(DEBUG_FLAG) -!else -#ARCH_CFLAGS = -nologo -c -Zel -W2 -H63 -Oxsb2 -Oy- -G6dF -Zp8 $(DEBUG_FLAG) -ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zl -Zp8 -W2 -Oi -Ot -Oy- -Ob2 -GF -Gy -Gd $(DEBUG_FLAG) -!endif -ARCH_LDFLAGS = $(SYS_LDFLAGS) -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-x86.manifest - -!else -!if "$(ARCH)" == "mips" -ARCH_CFLAGS = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0 -ARCH_LDFLAGS = $(SYS_LDFLAGS) -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-mips.manifest - -!else -!if "$(ARCH)" == "alpha" -!if "$(BUILD_TYPE)" == "spd" -ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl= -!else -ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl= -!endif -ARCH_LDFLAGS = $(SYS_LDFLAGS) -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-alpha.manifest - -!else -!if "$(ARCH)" == "ppc" -# These flags are a guess...if they don't work, please send me mail. -ARCH_LDFLAGS = $(SYS_LDFLAGS) -EMACS_HEAPSIZE = 27 -EMACS_PURESIZE = 5000000 -EMACS_MANIFEST = emacs-ppc.manifest - -!else -!if "$(ARCH)" == "AMD64" -!ifdef NOOPT -ARCH_CFLAGS = -nologo -D_AMD64_=1 -DWIN64 -D_WIN64 -DWIN32 -D_WIN32 -c -Zl -Zp8 -W2 -Od -Gd -Wp64 $(DEBUG_FLAG) -!else -ARCH_CFLAGS = -nologo -D_AMD64_=1 -DWIN64 -D_WIN64 -DWIN32 -D_WIN32 -c -Zl -Zp8 -W2 -O2x -GF -Gy -Gd $(DEBUG_FLAG) -!endif -ARCH_LDFLAGS = $(SYS_LDFLAGS) -machine:x64 -ARCH_RCFLAGS = -DWIN64 -EMACS_HEAPSIZE = 42 -EMACS_PURESIZE = 10000000 -EMACS_MANIFEST = emacs-x64.manifest - -!else -!ERROR Unknown architecture type "$(ARCH)". -!endif -!endif -!endif -!endif -!endif - -LINK_FLAGS = $(ARCH_LDFLAGS) $(DEBUG_LINK) $(USER_LDFLAGS) - -# From MSVC 5.0 onwards, it seem base relocation information is not included, -# at least in release builds. We need to ensure the reloc info is included -# in order to use the MSVC profiler. -!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)") -EXTRA_LINK = -!ELSE -EXTRA_LINK = -profile -!ENDIF - -# -# If the compiler supports compiling multiple .c files to .o files at -# one time, use this feature. -# -!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)") -.c{$(BLD)}.obj: - $(CC) $(CFLAGS) -Fo$(BLD)\ $< -!ELSE -.c{$(BLD)}.obj:: - $(CC) $(CFLAGS) -Fo$(BLD)\ $< -!ENDIF diff --git a/nt/paths.h b/nt/paths.h deleted file mode 100644 index d6dfaad8f4..0000000000 --- a/nt/paths.h +++ /dev/null @@ -1,66 +0,0 @@ -/* paths.h file for MS Windows - -Copyright (C) 1993, 1995, 1997, 1999, 2001-2015 Free Software -Foundation, Inc. - -This file is part of GNU Emacs. - -GNU Emacs is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 3 of the License, or -(at your option) any later version. - -GNU Emacs is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU Emacs. If not, see . */ - -/* Relative file names in this file that begin with "%emacs_dir%/" are - treated specially by decode_env_path: they are expanded relative to - the value of the emacs_dir environment variable, which points to - the root of the Emacs tree. */ - -/* The default search path for Lisp function "load". - Together with PATH_SITELOADSEARCH, this sets load-path. */ -/* #define PATH_LOADSEARCH "/usr/local/lib/emacs/lisp" */ -#define PATH_LOADSEARCH "%emacs_dir%/lisp" - -/* Like PATH_LOADSEARCH, but contains the non-standard pieces. */ -#define PATH_SITELOADSEARCH "%emacs_dir%/site-lisp;%emacs_dir%/../site-lisp" - -/* Like PATH_LOADSEARCH, but used only when Emacs is dumping. This - path is usually identical to PATH_LOADSEARCH except that the entry - for the directory containing the installed lisp files has been - replaced with ../lisp. */ -#define PATH_DUMPLOADSEARCH "../lisp" - -/* The extra search path for programs to invoke. This is appended to - whatever the PATH environment variable says to set the Lisp - variable exec-path and the first file name in it sets the Lisp - variable exec-directory. exec-directory is used for finding - executables and other architecture-dependent files. */ -/* #define PATH_EXEC "/usr/local/lib/emacs/etc" */ -#define PATH_EXEC "%emacs_dir%/bin;%emacs_dir%/lib-src/oo-spd/i386;%emacs_dir%/lib-src/oo/i386;%emacs_dir%/nt/oo-spd/i386;%emacs_dir%/nt/oo/i386" - -/* Where Emacs should look for its architecture-independent data - files, like the NEWS file. The lisp variable data-directory - is set to this value. */ -/* #define PATH_DATA "/usr/local/lib/emacs/data" */ -#define PATH_DATA "%emacs_dir%/etc" - -/* Where Emacs should look for X bitmap files. - The lisp variable x-bitmap-file-path is set based on this value. */ -#define PATH_BITMAPS "" - -/* Where Emacs should look for its docstring file. The lisp variable - doc-directory is set to this value. */ -#define PATH_DOC "%emacs_dir%/etc" - -/* Where the configuration process believes the info tree lives. The - lisp variable configure-info-directory gets its value from this - macro, and is then used to set the Info-default-directory-list. */ -/* #define PATH_INFO "/usr/local/info" */ -#define PATH_INFO "C:/emacs/info" -- cgit v1.2.3