From 7176ec4e76b3c0f1ceb689347e7412226f802742 Mon Sep 17 00:00:00 2001
From: rekado <rekado@elephly.net>
Date: Sat, 18 Apr 2015 19:01:57 +0200
Subject: do not attenuate tuner output at all

---
 gschem/board.pcb | 2 +-
 gschem/tuner.sch | 9 +++++----
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'gschem')

diff --git a/gschem/board.pcb b/gschem/board.pcb
index a8d3c6d..f0b1e59 100644
--- a/gschem/board.pcb
+++ b/gschem/board.pcb
@@ -1554,7 +1554,7 @@ Element["hidename" "R025" "L1" "1mH" 2850.00mil 2300.00mil -180.00mil -20.00mil
 
 	)
 
-Element["hidename" "R025" "R330" "33k" 2200.00mil 2725.00mil 120.00mil -20.00mil 0 100 ""]
+Element["hidename" "R025" "R330" "0" 2200.00mil 2725.00mil 120.00mil -20.00mil 0 100 ""]
 (
 	Pin[0.0000 0.0000 68.00mil 30.00mil 74.00mil 38.00mil "1" "1" "square,edge2"]
 	Pin[400.00mil 0.0000 68.00mil 30.00mil 74.00mil 38.00mil "2" "2" "edge2"]
diff --git a/gschem/tuner.sch b/gschem/tuner.sch
index 6baaf8b..e08544b 100644
--- a/gschem/tuner.sch
+++ b/gschem/tuner.sch
@@ -1,4 +1,4 @@
-v 20110115 2
+v 20130925 2
 C 49800 41200 1 270 0 resistor-2.sym
 {
 T 50150 40800 5 10 0 0 270 0 1
@@ -209,14 +209,15 @@ device=RESISTOR
 T 50100 41900 5 10 1 1 0 0 1
 refdes=R330
 T 50100 41700 5 10 1 1 0 0 1
-value=33k
+value=0
 T 49800 42400 5 10 0 1 0 0 1
 footprint=R025
 }
 N 49900 42400 49900 42500 4
 N 51400 41300 49900 41300 4
-T 50100 42200 9 10 1 0 0 0 1
-TODO: figure out by just how much the signal should be attenuated. 
+T 50100 42200 9 10 1 0 0 0 2
+TODO: 33k is too much in my experience.
+Bridging this with a wire works fine for me.
 C 50000 48400 1 270 0 resistor-2.sym
 {
 T 50350 48000 5 10 0 0 270 0 1
-- 
cgit v1.2.3