From 72da00bf591bf938ccbb71ad519ee5ea938bf128 Mon Sep 17 00:00:00 2001
From: rekado <rekado@elephly.net>
Date: Sat, 29 Dec 2012 20:17:03 +0800
Subject: bypass contacts are wired on the switch, off-board

---
 gschem/crossover.sch | 84 +++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 70 insertions(+), 14 deletions(-)

diff --git a/gschem/crossover.sch b/gschem/crossover.sch
index d53e01f..26a8a1f 100644
--- a/gschem/crossover.sch
+++ b/gschem/crossover.sch
@@ -420,7 +420,7 @@ T 53600 46800 5 10 0 1 0 0 1
 footprint=RCY100P
 }
 N 54500 47000 54900 47000 4
-T 48600 43500 9 10 1 0 0 0 4
+T 48100 43200 9 10 1 0 0 0 4
 When the cross-over is disabled, the two
 send outputs each carry the full signal.
 S401, S402, S403 are all part of the same
@@ -434,13 +434,13 @@ device=none
 T 45900 46200 5 10 1 1 0 7 1
 value=BASS
 }
-C 49700 46100 1 180 0 input-2.sym
+C 49800 46100 1 180 0 input-2.sym
 {
-T 49700 45500 5 10 1 0 180 0 1
+T 49800 45500 5 10 1 0 180 0 1
 net=XOVER:1
-T 49100 45400 5 10 0 0 180 0 1
+T 49200 45400 5 10 0 0 180 0 1
 device=none
-T 48500 45700 5 10 1 1 180 7 1
+T 48600 45700 5 10 1 1 180 7 1
 value=XOVER
 }
 C 47200 46000 1 0 0 switch-spdt-1.sym
@@ -449,12 +449,10 @@ T 47600 46800 5 10 0 0 0 0 1
 device=SPDT
 T 47600 46600 5 10 1 1 0 0 1
 refdes=S401
-T 47200 46000 5 10 0 0 0 0 1
-footprint=CONNECTOR 3 1
 }
 N 47200 46200 46800 46200 4
 N 48100 46400 49800 46400 4
-N 48100 46000 48300 46000 4
+N 48100 46000 48400 46000 4
 T 50000 39800 9 10 1 0 0 0 3
 This dual pot is wired to blend the two signals.
 As the resistance of one pot increases, the other
@@ -609,8 +607,6 @@ T 52600 47600 5 10 0 0 0 6 1
 device=SPDT
 T 52600 47400 5 10 1 1 0 6 1
 refdes=S402
-T 53000 46800 5 10 0 0 0 6 1
-footprint=CONNECTOR 3 1
 }
 C 53000 45300 1 0 1 switch-spdt-1.sym
 {
@@ -618,8 +614,6 @@ T 52600 46100 5 10 0 0 0 6 1
 device=SPDT
 T 52600 45900 5 10 1 1 0 6 1
 refdes=S403
-T 53000 45300 5 10 0 0 0 6 1
-footprint=CONNECTOR 3 1
 }
 N 51500 45300 52100 45300 4
 N 49800 45700 49800 47200 4
@@ -786,5 +780,67 @@ footprint=R025
 N 54800 43100 54800 44200 4
 N 54800 44200 55200 44200 4
 N 55200 44200 55200 43500 4
-T 47300 47700 9 10 1 0 0 0 1
-TODO: 40{1,2,3}-2 are connected. This can be done off-board.
+T 46100 47800 9 10 1 0 0 0 1
+40{1,2,3}-2 are connected at the switch contacts, off-board.
+C 53400 47900 1 0 0 connector1-2.sym
+{
+T 54100 48800 5 10 1 1 0 6 1
+refdes=CONN420
+T 53700 48750 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 53700 48950 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+C 47000 44600 1 0 0 connector1-2.sym
+{
+T 47700 45500 5 10 1 1 0 6 1
+refdes=CONN410
+T 47300 45450 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 47300 45650 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+C 48300 44200 1 0 0 connector1-2.sym
+{
+T 49000 45100 5 10 1 1 0 6 1
+refdes=CONN411
+T 48600 45050 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 48600 45250 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+C 51700 47900 1 0 0 connector1-2.sym
+{
+T 52400 48800 5 10 1 1 0 6 1
+refdes=CONN421
+T 52000 48750 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 52000 48950 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+C 53400 44400 1 0 0 connector1-2.sym
+{
+T 54100 45300 5 10 1 1 0 6 1
+refdes=CONN430
+T 53700 45250 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 53700 45450 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+C 52300 42900 1 0 0 connector1-2.sym
+{
+T 53000 43800 5 10 1 1 0 6 1
+refdes=CONN431
+T 52600 43750 5 10 0 0 0 0 1
+device=CONNECTOR_1
+T 52600 43950 5 10 0 0 0 0 1
+footprint=CONNECTOR 1 1
+}
+N 53400 48300 53300 48300 4
+N 53300 48300 53300 47000 4
+N 51700 48300 51700 46400 4
+N 48300 46000 48300 44600 4
+N 47000 46200 47000 45000 4
+N 53400 44800 53200 44800 4
+N 52300 43300 51800 43300 4
+N 51800 43300 51800 45300 4
-- 
cgit v1.2.3