hardware/stick-preamp - This is a dual channel preamp in the making. I intend to use it with my [Chapman Stick](http://stick.com). You will need the [gEDA programs](http://www.geda-project.org) to view and edit these files. The [PCB editor](http://pcb.geda-project.org) is required to edit the board.

	Commit message (Expand)	Author	Age	Files	Lines
*	add pin for preamp2 out / xover in	rekado	2015-04-05	1	-2/+11
*	add TODO	rekado	2015-03-01	1	-0/+4
*	add archive of old drafts	rekado	2015-03-01	1	-0/+0
*	add parts map	rekado	2015-03-01	1	-0/+11
*	add old enclosure drawings	rekado	2015-03-01	2	-0/+6848
*	swap crossover output	rekado	2013-08-08	1	-9/+9
*	add indicator LED for crossover	rekado	2013-08-07	1	-6/+17
*	add output jacks	rekado	2013-08-05	1	-2/+29
*	add missing coupling capacitor	rekado	2013-08-04	1	-37/+39
*	colours and line thickness	rekado	2013-07-28	1	-1732/+1696
*	a few more fixes before production...	rekado	2013-07-26	1	-511/+1109
*	ready for production?	rekado	2013-07-25	1	-1308/+1262
*	text: add on/off switch	rekado	2013-07-23	1	-152/+148
*	board holes to "holes" layer	rekado	2013-07-23	1	-154/+182
*	add status LED	rekado	2013-07-20	1	-166/+298
*	various changes...	rekado	2013-07-20	1	-536/+1520
*	drill pattern, first draft	rekado	2013-07-19	1	-0/+4618
*	drawing of Hammond enclosure	rekado	2013-07-19	1	-0/+6154
*	update component names / silk screen	rekado	2013-01-25	5	-105/+121
*	3 mounting holes: M2x0.4	rekado	2013-01-08	1	-10/+7
*	increase mount hole diameter	rekado	2013-01-02	1	-942/+940
*	reduce gain of melody preamp?	rekado	2013-01-02	1	-0/+2
*	move cap away from drill hole	rekado	2013-01-02	1	-19/+20
*	remove out pins to -Vcc from board	rekado	2013-01-01	2	-77/+88
*	remove outdated comment	rekado	2013-01-01	1	-3/+1
*	increase route to pin clearance	rekado	2012-12-31	1	-7/+7
*	simplify routing of melody return cap	rekado	2012-12-31	1	-35/+28
*	redesign...	rekado	2012-12-29	1	-970/+1103
*	bypass contacts are wired on the switch, off-board	rekado	2012-12-29	1	-14/+70
*	remove melody buffer (preamp is buffered); remove trim pots	rekado	2012-12-29	2	-94/+54
*	correct name	rekado	2012-12-28	1	-1/+1
*	connect only one of the jack switches	rekado	2012-12-28	2	-22/+21
*	reduce gain/distortion...	rekado	2012-12-27	1	-1/+1
*	don't roll off low frequencies in bass preamp	rekado	2012-12-27	1	-1/+1
*	pins to connect offboard blend pot	rekado	2012-12-27	1	-1/+21
*	put inputs on -Vcc when nothing is connected	rekado	2012-12-27	1	-3/+9
*	improve coupling at mixer	rekado	2012-12-26	1	-20/+66
*	add coupling caps to return; remove from mixer	rekado	2012-12-26	1	-148/+190
*	update all coupling caps to 10uF...	rekado	2012-12-26	4	-18/+18
*	clean up middle section	rekado	2012-12-26	1	-535/+535
*	remove coupling caps	rekado	2012-12-26	1	-123/+122
*	connect reference voltage via resistor; reduce cap value	rekado	2012-12-23	2	-70/+132
*	replace power filtering resistor with inductor	rekado	2012-12-02	2	-30/+32
*	replace another JFET with NPN transistor	rekado	2012-11-26	2	-103/+98
*	replace JFET with NPN transistor	rekado	2012-11-26	2	-101/+100
*	place and connect transistor in tuner mixer	rekado	2012-11-26	1	-271/+273
*	add NPN transistor to make mixer active	rekado	2012-11-26	2	-156/+247
*	add transistor after bass blend pots	rekado	2012-11-25	4	-262/+466
*	update board to latest schematic changes	rekado	2012-11-23	1	-62/+85
*	reminders to add buffers/active mixers	rekado	2012-11-23	2	-4/+7