]> git.elephly.net Git - hardware/stick-preamp.git/shortlog
2013-07-26  rekadoa few more fixes before production
2013-07-25  rekadoready for production?
2013-07-22  rekadotext: add on/off switch
2013-07-22  rekadoboard holes to "holes" layer
2013-07-20  rekadoadd status LED
2013-07-20  rekadovarious changes
2013-07-19  rekadodrill pattern, first draft
2013-07-19  rekadodrawing of Hammond enclosure
2013-01-24  rekadoupdate component names / silk screen
2013-01-08  rekado3 mounting holes: M2x0.4
2013-01-02  rekadoincrease mount hole diameter
2013-01-02  rekadoreduce gain of melody preamp?
2013-01-02  rekadomove cap away from drill hole
2013-01-01  rekadoremove out pins to -Vcc from board
2013-01-01  rekadoremove outdated comment
2012-12-31  rekadoincrease route to pin clearance
2012-12-31  rekadosimplify routing of melody return cap
2012-12-29  rekadoredesign
2012-12-29  rekadobypass contacts are wired on the switch, off-board
2012-12-29  rekadoremove melody buffer (preamp is buffered); remove trim...
2012-12-28  rekadocorrect name
2012-12-28  rekadoconnect only one of the jack switches
2012-12-27  rekadoreduce gain/distortion
2012-12-27  rekadodon't roll off low frequencies in bass preamp
2012-12-27  rekadopins to connect offboard blend pot
2012-12-27  rekadoput inputs on -Vcc when nothing is connected
2012-12-26  rekadoimprove coupling at mixer
2012-12-26  rekadoadd coupling caps to return; remove from mixer
2012-12-26  rekadoupdate all coupling caps to 10uF
2012-12-26  rekadoclean up middle section
2012-12-26  rekadoremove coupling caps
2012-12-23  rekadoconnect reference voltage via resistor; reduce cap...
2012-12-01  rekadoreplace power filtering resistor with inductor
2012-11-26  rekadoreplace another JFET with NPN transistor
2012-11-26  rekadoreplace JFET with NPN transistor
2012-11-26  rekadoplace and connect transistor in tuner mixer
2012-11-26  rekadoadd NPN transistor to make mixer active
2012-11-25  rekadoadd transistor after bass blend pots
2012-11-23  rekadoupdate board to latest schematic changes
2012-11-23  rekadoreminders to add buffers/active mixers
2012-11-23  rekadoadd shunt resistor to output
2012-11-22  rekadoupdate board
2012-11-22  rekadoadd jumper to connect Vcc nets
2012-11-22  rekadomove power rails filtering to power supply
2012-11-22  rekadorename power connector to make it appear on PCB
2012-11-22  rekadomore biasing with reference voltage
2012-11-22  rekadoadjust value and size of support caps
2012-11-22  rekadopower supply filtering
2012-11-21  rekadouse this expensive voltage reference instead of a volta...
2012-11-20  rekadofirst complete layout draft
2012-11-20  rekadoremove DI box
2012-11-19  rekadoupdate board
2012-11-19  rekadoupdate board
2012-11-19  rekadoadd pin to bass blend pot
2012-11-19  rekadoignore more files
2012-11-19  rekadoremove outdated notice
2012-11-19  rekadohide footprint attribute
2012-11-19  rekadoadd virtual ground IC
2012-11-19  rekadoreplace tuner trim pot with fixed resistor
2012-11-19  rekadoset graphical=1 for off-board components
2012-11-19  rekadoremove trim pot before DI box
2012-11-19  rekadoadd connectors to output signals
2012-11-18  rekadoupdate board
2012-11-18  rekadochange switch footprint to generic connector
2012-11-18  rekadosimplify the crossover bypass
2012-11-18  rekadoeffects inserts for bass channels
2012-11-18  rekadoadd pins for bass effects insert
2012-11-18  rekadoadd connector for inputs
2012-11-18  rekadoremove default footprint from stereo jack symbol
2012-11-18  rekadomerge preamp circuits
2012-11-18  rekadoadd connector for tuner output and melody insert
2012-11-18  rekadosimplify melody send/return
2012-11-17  rekadocrossover routing
2012-11-17  rekadostart routing preamps
2012-11-17  rekadoreduce board size
2012-11-17  rekadocorrect power supply of IC401
2012-11-17  rekadouse BOURNS 3296w footprint for trim pots
2012-11-17  rekadoroughly align both preamp sections
2012-11-16  rekadobegin PCB layout
2012-11-16  rekadorename nets to ensure they are separate
2012-11-16  rekadoreplace CK05 cap footprint with ACY100
2012-11-16  rekadoRCY300P --> RCY150P for 100uF caps
2012-11-16  rekadomodify pin numbers of JFET symbol to match TO92 footprint
2012-11-16  rekadochange IC package from SO8 to DIL8
2012-11-16  rekadoadd/fix footprints
2012-11-16  rekadorenumber refdes for unique ids
2012-11-16  rekadoautoload custom symbols / footprints
2012-11-16  rekadoadd footprints to symbols
2012-11-16  rekadorename TUNER net to TUNER:1
2012-11-15  rekadoinitial commit