#

31 files changed, 5988 insertions, 0 deletions

diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000000..639b0a5f30
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,558 @@
+!1 This file is largely machine-readable; it should be easy to do
+!2 simple transformations on it mechanically, e.g. to combine lines
+!3 by the same author.  The parenthesized token is always "(changed)"
+!4 or "(wrote)" or occasionally "(co-wrote)".  The file name is
+!5 sometimes replaced or followed by a comment in [brackets].
+!6 Two authors, Kågedal (K{a-ring}gedal) and Potort́
+!7 (Potort{i-grave}), have non-ASCII letters in their names.
+!8
+Abrahamsen, Per (changed) lisp/easymenu.el
+Abrahamsen, Per (changed) lisp/frame.el
+Abrahamsen, Per (changed) src/window.c
+Abrahamsen, Per (wrote) lisp/double.el
+Adams, Jay K. (wrote) lisp/jka-compr.el
+Arceneax, Joe (changed) lisp/term/x-win.el
+Arceneax, Joe (changed) src/xfns.c
+Arceneax, Joe (changed) src/xselect.c
+Arceneax, Joe (changed) src/xterm.c
+Arceneax, Joe (changed) src/xterm.h
+Arceneax, Joe (wrote) src/xrdb.c
+Ben-Gershon, Michael (changed) src/unexec.c
+Ben-Gershon, Michael (wrote) src/m/acorn.h
+Ben-Zvi, Boaz (wrote) lisp/profile.el
+Berry, Karl (changed) src/s/isc2-2.h
+Blandy, Jim (changed) lisp/add-log.el
+Blitz Product Development Corporation (wrote) lisp/ispell.el
+Bothner, Per (changed) src/process.c
+Bothner, Per (changed) src/sysdep.c
+Bothner, Per (wrote) lisp/term.el
+Bresz, Frank (wrote) lisp/diff.el
+Broadey, Kevin (wrote) lisp/foldout.el
+Brown, David M. (wrote) lisp/array.el
+Buhrman, Jan-Hein (changed) lisp/env.el
+Burton, Bill (wrote) src/m/sequent-ptx.h
+Burton, Bill (wrote) src/s/ptx.h
+Byers, Gary (changed) src/s/xenix.h
+Carey, Shawn M. (wrote) src/s/freebsd.h
+Cederqvist, Per (changed) lisp/vc-hooks.el
+Cederqvist, Per (changed) lisp/vc.el
+Chalupsky, Hans (changed) lisp/bytecomp.el
+Chalupsky, Hans (wrote) lisp/advice.el
+Chalupsky, Hans (wrote) lisp/trace.el
+Chassell, Robert J. (wrote) lisp/page-ext.el
+Clamen, Stewart (wrote) lisp/cal-mayan.el
+Clark, James (changed) src/unexec.c
+Clark, James (wrote) lisp/sgml-mode.el
+Cutting, Doug (wrote) lisp/disass.el
+Decker, Eric (changed) src/m/hp9000s800.h
+Decker, Eric (changed) src/s/hpux.h
+Decker, Eric (changed) src/sysdep.c
+Dodd, Lawrence R. (changed) lisp/fortran.el
+Dodd, Lawrence R. (changed) lisp/info.el
+Dodd, Lawrence R. (changed) lisp/ispell4.el
+Dodd, Lawrence R. (co-wrote) lisp/dired-x.el
+Draves, Scot (wrote) lisp/tq.el
+Dukhovni, Viktor (wrote) src/unexsunos4.c
+Dutt, G. Dinesh (changed) lisp/etags.el
+Dwork, Jeff (changed) lisp/ehelp.el
+Eggert, Paul (changed) configure.in
+Eggert, Paul (changed) lib-src/rcs-checkin
+Eggert, Paul (changed) lisp/calendar.el
+Eggert, Paul (changed) lisp/gnus.el
+Eggert, Paul (changed) lisp/gnuspost.el
+Eggert, Paul (changed) lisp/timezone.el
+Eggert, Paul (changed) lisp/vc-hooks.el
+Eggert, Paul (changed) lisp/vc.el
+Eggert, Paul (changed) src/callproc.c
+Eggert, Paul (changed) src/cmds.c
+Eggert, Paul (changed) src/config.h.in
+Eggert, Paul (changed) src/editfns.c
+Eggert, Paul (changed) src/editfns.c
+Eggert, Paul (changed) src/floatfns.c
+Eggert, Paul (changed) src/systime.h
+Eggert, Paul (changed) src/uaf.h
+Eggert, Paul (wrote) lib-src/rcs2log
+Eggert, Paul (wrote) lib-src/vcdiff
+Eggert, Paul (wrote) lisp/cal-dst.el
+Eriksen, Hans Henrik (wrote) lisp/simula.el
+Ernst, Michael (changed) lisp/dired.el
+Ernst, Michael (changed) lisp/fill.el
+Ernst, Michael (changed) lisp/rmailsum.el
+Ernst, Michael (wrote) lisp/reposition.el
+Fish, Frederic N. III (changed) src/unexec.c
+Fleehart, Tim (co-wrote) src/makefile.nt
+Fogel, Karl (changed) src/editfns.c
+Fogel, Karl (wrote) lisp/bookmark.el
+Fogel, Karl (wrote) lisp/mail-hist.el
+Fogel, Karl (wrote) lisp/saveplace.el
+Friedman, Noah (changed) lisp/timer.el
+Friedman, Noah (wrote) lisp/rlogin.el
+Friedman, Noah (wrote) lisp/rsz-mini.el
+Friedman, Noah (wrote) lisp/type-break.el
+Gabryelski, Keith (wrote) lib-src/hexl.c
+Gabryelski, Keith (wrote) lisp/hexl-mode.el
+Gallagher, Kevin (wrote) lisp/edt.el
+Gallagher, Kevin (wrote) lisp/flow-ctrl.el
+Gayle, Howard (wrote) lisp/case-table.el
+Gayle, Howard (wrote) lisp/disp-table.el
+Gayle, Howard (wrote) lisp/iso-ascii.el
+Gayle, Howard (wrote) lisp/iso-insert.el
+Gayle, Howard (wrote) lisp/iso-swed.el
+Gayle, Howard (wrote) lisp/iso-syntax.el
+Gayle, Howard (wrote) lisp/iso-transl.el
+Gayle, Howard (wrote) lisp/swedish.el
+Gayle, Howard (wrote) src/casetab.c
+Gildea, Stephen (changed) lisp/tex-mode.el
+Gildea, Stephen (wrote) etc/refcard.tex
+Gildea, Stephen (wrote) lisp/mh-comp.el
+Gildea, Stephen (wrote) lisp/mh-e.el
+Gildea, Stephen (wrote) lisp/mh-funcs.el
+Gildea, Stephen (wrote) lisp/mh-mime.el
+Gildea, Stephen (wrote) lisp/mh-pick.el
+Gildea, Stephen (wrote) lisp/mh-seq.el
+Gildea, Stephen (wrote) lisp/mh-utils.el
+Gildea, Stephen (wrote) lisp/tex-mode.el
+Gildea, Stephen (wrote) lisp/time-stamp.el
+Gillespie, David (wrote) lisp/cl-compat.el
+Gillespie, David (wrote) lisp/cl-extra.el
+Gillespie, David (wrote) lisp/cl-macs.el
+Gillespie, David (wrote) lisp/cl-seq.el
+Gillespie, David (wrote) lisp/cl.el
+Gillespie, David (wrote) lisp/complete.el
+Gillespie, David (wrote) lisp/edmacro.el
+Gillespie, David (wrote) man/cl.texinfo
+Goldowsky, Boris (changed) lisp/fill.el
+Goldowsky, Boris (changed) lisp/indent.el
+Goldowsky, Boris (changed) lisp/paragraphs.el
+Goldowsky, Boris (changed) lisp/simple.el
+Goldowsky, Boris (changed) lisp/tex-mode.el
+Goldowsky, Boris (changed) src/cmds.c
+Goldowsky, Boris (changed) src/fileio.c
+Goldowsky, Boris (changed) src/xfaces.c
+Goldowsky, Boris (wrote) lisp/avoid.el
+Goldowsky, Boris (wrote) lisp/enriched.el
+Goldowsky, Boris (wrote) lisp/facemenu.el
+Goldowsky, Boris (wrote) lisp/shadowfile.el
+Grabowski, John (changed) src/xfns.c
+Greiner, Kevin J. (changed) lisp/gud.el
+Gschwind, Michael (wrote) lisp/iso-cvt.el
+Hageman, Tom (changed) lib-src/etags.c
+Hartman, K. Shane (changed) lisp/rmail.el
+Hartman, K. Shane (changed) lisp/rmailedit.el
+Hartman, K. Shane (changed) lisp/rmailsum.el
+Hartman, K. Shane (wrote) lisp/chistory.el
+Hartman, K. Shane (wrote) lisp/echistory.el
+Hartman, K. Shane (wrote) lisp/electric.el
+Hartman, K. Shane (wrote) lisp/emacsbug.el
+Hartman, K. Shane (wrote) lisp/helper.el
+Hartman, K. Shane (wrote) lisp/mim-mode.el
+Hartman, K. Shane (wrote) lisp/mim-syntax.el
+Hartman, K. Shane (wrote) lisp/picture.el
+Hartman, K. Shane (wrote) lisp/view.el
+Heuer, Karl (changed) [miscellaneous changes throughout]
+Hewlett-Packard (changed) lib-src/emacsclient.c
+Hewlett-Packard (changed) lib-src/emacsserver.c
+Hewlett-Packard (changed) lisp/server.el
+Hewlett-Packard (changed) src/keyboard.c
+Holst, Anders (wrote) lisp/hippie-exp.el
+Horsley, Thomas (changed) src/sysdep.c
+Horsley, Thomas (wrote) src/s/cxux.h
+Horsley, Thomas (wrote) src/s/cxux7.h
+Indiana University Foundation (changed) src/buffer.c
+Indiana University Foundation (changed) src/buffer.h
+Indiana University Foundation (changed) src/indent.c
+Indiana University Foundation (changed) src/search.c
+Indiana University Foundation (changed) src/xdisp.c
+Indiana University Foundation (wrote) src/region-cache.c
+Indiana University Foundation (wrote) src/region-cache.h
+Ingebrigtsen, Lars Magne (wrote) lisp/gnus-uu.el
+International Business Machines (changed) src/emacs.c
+International Business Machines (changed) src/fileio.c
+International Business Machines (changed) src/m/ibmrt.h
+International Business Machines (changed) src/process.c
+International Business Machines (changed) src/sysdep.c
+International Business Machines (changed) src/unexec.c
+International Business Machines (wrote) src/m/ibmrt-aix.h
+Ishikawa, Chiaki (changed) src/m/aviion.h
+Ishikawa, Chiaki (changed) src/s/dgux.h
+Johnson, Michael K. (changed) configure.in
+Johnson, Michael K. (changed) src/emacs.c
+Johnson, Michael K. (changed) src/m/intel386.h
+Johnson, Michael K. (changed) src/mem-limits.h
+Johnson, Michael K. (changed) src/process.c
+Johnson, Michael K. (changed) src/s/template.h
+Johnson, Michael K. (changed) src/sysdep.c
+Johnson, Michael K. (changed) src/syssignal.h
+Johnson, Michael K. (changed) src/systty.h
+Johnson, Michael K. (changed) src/unexec.c
+Johnson, Michael K. (changed) src/ymakefile
+Johnson, Michael K. (wrote) src/s/linux.h
+Jones, Kyle E. (wrote) lisp/life.el
+Jones, Kyle E. (wrote) lisp/mldrag.el
+Kamens, Jonathan I. (changed) lisp/rmail.el
+Kamens, Jonathan I. (changed) lisp/rmailout.el
+Kamens, Jonathan I. (changed) lisp/vc.el
+Kautz, Henry (wrote) lisp/bib-mode.el
+Kautz, Henry (wrote) lisp/refbib.el
+Kaye, Howard (wrote) lisp/sort.el
+Kelsey, Joseph M. (changed) src/fileio.c
+Kelsey, Joseph M. (changed) src/vms-pwd.h
+Kelsey, Joseph M. (changed) src/vmsfns.c
+Kelsey, Joseph M. (wrote) src/dir.h
+Kelsey, Joseph M. (wrote) src/uaf.h
+Kendall, Sam (changed) lib-src/etags.c
+Kendall, Sam (changed) lisp/etags.el
+Kifer, Michael (changed) lisp/appt.el
+Kifer, Michael (wrote) lisp/ediff.el
+Kifer, Michael (wrote) lisp/viper.el [under the name vip19]
+King, Richard (changed) lisp/rnews.el
+King, Richard (changed) lisp/rnewspost.el
+King, Richard (changed) src/cmds.c
+King, Richard (changed) src/search.c
+King, Richard (wrote) lisp/backquote.el
+King, Richard (wrote) lisp/userlock.el
+King, Richard (wrote) src/filelock.c
+Kolodney, Larry K. (wrote) lib-src/cvtmail.c
+Krawitz, Robert (wrote) src/xmenu.c
+Kremer, Sebastian (changed) lisp/add-log.el
+Kremer, Sebastian (wrote) lisp/dired-aux.el
+Kremer, Sebastian (wrote) lisp/dired.el
+Kremer, Sebastian (wrote) lisp/find-dired.el
+Kremer, Sebastian (wrote) lisp/ls-lisp.el
+Kumar, Kishore (changed) lisp/terminal.el
+Kågedal, David (wrote) lisp/tempo.el
+LaLiberte, Daniel (changed) [miscellaneous changes to the manual]
+LaLiberte, Daniel (co-wrote) lisp/hideif.el
+LaLiberte, Daniel (wrote) lisp/cust-print.el
+LaLiberte, Daniel (wrote) lisp/edebug.el
+LaLiberte, Daniel (wrote) lisp/isearch.el
+Lambert, Mark (changed) src/process.c
+Lambert, Mark (changed) src/process.h
+Larson, Aaron (changed) lisp/bibtex.el
+Larus, James R. (wrote) lisp/mh-e.el
+Lepied, Frederic (changed) lisp/gnus.el
+Lindberg, Lars (changed) lisp/dabbrev.el
+Lindberg, Lars (co-wrote) lisp/imenu.el
+Lindberg, Lars (wrote) lisp/msb.el
+Love, Dave (changed) lisp/gud.el
+Lucid, Inc. (changed) src/bytecode.c
+Lucid, Inc. (wrote) lisp/byte-opt.el
+Lucid, Inc. (wrote) lisp/byte-run
+Lucid, Inc. (wrote) lisp/bytecomp.el
+Lucid, Inc. (wrote) lisp/delsel.el
+Lucid, Inc. (wrote) lisp/disass.el
+Lucid, Inc. (wrote) lisp/faces.el
+Lucid, Inc. (wrote) lisp/font-lock.el
+Lucid, Inc. (wrote) lisp/lmenu.el
+Lucid, Inc. (wrote) lisp/lselect.el
+Lucid, Inc. (wrote) lisp/mailabbrev.el
+Lucid, Inc. (wrote) lisp/select.el
+Lucid, Inc. (wrote) src/xfaces.c
+Lucid, Inc. (wrote) src/xselect.c
+MCC (changed) lib-src/etags.c
+MIT (changed) lib-src/emacsclient.c
+MIT (changed) lib-src/emacsserver.c
+MIT (changed) lib-src/movemail.c
+MIT (changed) lisp/rmail.el
+MIT (changed) lisp/rmailedit.el
+MIT (changed) lisp/rmailkwd.el
+MIT (changed) lisp/rmailmsc.el
+MIT (changed) lisp/rmailout.el
+MIT (changed) lisp/rmailsum.el
+MIT (changed) lisp/scribe.el
+MIT (changed) lisp/server.el
+MIT (changed) src/lisp.h
+MIT (changed) src/sysdep.c
+MIT (changed) src/unexec.c
+MIT (wrote) src/xmenu.c
+Mager, Neil M. (wrote) lisp/appt.el
+Manheimer, Kenneth (wrote) lisp/allout.el
+Manheimer, Kenneth (wrote) lisp/icomplete.el
+Mann, William F. (changed) lisp/perl-mode.el
+Mann, William F. (wrote) lisp/perl-mode.el
+Mansfield, Niall (changed) lib-src/etags.c
+Marick, Brian (co-wrote) lisp/hideif.el
+Marko, Kohtala (changed) lisp/info.el
+Markowitz, Sidney (changed) lisp/doctor.el
+Marshall, Simon (changed) lisp/ada.el
+Marshall, Simon (changed) lisp/comint.el
+Marshall, Simon (changed) lisp/font-lock.el
+Marshall, Simon (changed) lisp/fortran.el
+Marshall, Simon (changed) lisp/mouse.el
+Marshall, Simon (changed) lisp/outline.el
+Marshall, Simon (changed) lisp/pascal.el
+Marshall, Simon (changed) lisp/perl-mode.el
+Marshall, Simon (changed) lisp/rmail.el
+Marshall, Simon (changed) lisp/sendmail.el
+Marshall, Simon (changed) lisp/shell.el
+Marshall, Simon (changed) lisp/texinfo.el
+Martin, Charles R. (wrote) lisp/autoinsert.el
+McGary, Greg (changed) lisp/tar-mode.el
+McGrath, Roland (changed) [miscellaneous changes throughout]
+McGrath, Roland (changed) lisp/add-log.el
+McGrath, Roland (wrote) lisp/autoload.el
+McGrath, Roland (wrote) lisp/compile.el
+McGrath, Roland (wrote) lisp/etags.el
+McGrath, Roland (wrote) lisp/find-dired.el
+McGrath, Roland (wrote) lisp/map-ynp.el
+McGrath, Roland (wrote) lisp/upd-copyr.el
+Megginson, David (wrote) lisp/derived.el
+Mlynarik, Richard (changed) lisp/rmail.el
+Mlynarik, Richard (wrote) lib-src/env.c
+Mlynarik, Richard (wrote) lisp/cl-indent.el
+Mlynarik, Richard (wrote) lisp/ebuff-menu.el
+Mlynarik, Richard (wrote) lisp/ehelp.el
+Mlynarik, Richard (wrote) lisp/rfc822.el
+Mlynarik, Richard (wrote) lisp/terminal.el
+Mohan, Mosur (changed) lib-src/etags.c
+Morgenthaler, Jeff (changed) lisp/flow-ctrl.el
+Morgenthaler, Jeff (changed) lisp/term/vt200.el
+Morgenthaler, Jeff (changed) lisp/term/vt201.el
+Morgenthaler, Jeff (changed) lisp/term/vt220.el
+Morgenthaler, Jeff (changed) lisp/term/vt240.el
+Motorola (changed) lisp/buff-menu.el
+Mueller, Ulrich (changed) lisp/gud.el
+Naggum, Erik (changed) src/editfns.c
+Naggum, Erik (changed) src/editfns.c
+Nakano, Hiroshi (changed) src/ralloc.c
+Nakano, Hiroshi (changed) src/unexelf.c
+Narasimhan, Sundar (changed) lisp/rnews.el
+Narasimhan, Sundar (changed) lisp/rnewspost.el
+NeXT, Inc. (wrote) src/unexnext.c
+Neale, Mark (changed) lisp/fortran.el
+Neitzel, Martin (changed) lisp/sc.el
+Neumann, Thomas (wrote) lisp/makefile.el
+Nguyen, Thien-Thi (wrote) lisp/hideshow.el
+Nickelsen, Jurgen (wrote) lisp/ws-mode.el
+Norden, Jeff (wrote) lisp/kermit.el
+Norman, Andrew (wrote) lisp/ange-ftp.el
+Oram, Andrew (changed) [miscellaneous changes to files in man/]
+Oram, Andrew (changed) man/calendar.texi
+Pfeiffer, Daniel (wrote) lisp/sh-script.el
+Pfeiffer, Daniel (wrote) lisp/skeleton.el
+Pfeiffer, Daniel (wrote) lisp/two-column.el
+Pierresteguy, Frederic (changed) lisp/compile.el
+Pierresteguy, Frederic (changed) lisp/rmail.el
+Pierresteguy, Frederic (changed) lisp/rmailsum.el
+Pierresteguy, Frederic (changed) src/editfns.c
+Pierresteguy, Frederic (changed) src/lisp.h
+Pierresteguy, Frederic (changed) src/xfns.c
+Pierresteguy, Frederic (changed) src/xmenu.c
+Pierresteguy, Frederic (changed) src/xterm.c
+Pierresteguy, Frederic (changed) src/xterm.h
+Pierresteguy, Frederic (wrote) src/widget.c
+Plaunt, Christian (wrote) lisp/soundex.el
+Potort́, Francesco A. (changed) lib-src/etags.c
+Potort́, Francesco A. (changed) lisp/man.el
+Potort́, Francesco A. (changed) lisp/rlogin.el
+Potort́, Francesco A. (changed) lisp/vc-hooks.el
+Potort́, Francesco A. (changed) src/filelock.c
+Potort́, Francesco A. (changed) src/search.c
+Potort́, Francesco A. (wrote) lisp/cmacexp.el
+Potort́, Francesco A. (wrote) src/m/delta.h
+Prange, Michael D. (changed) lisp/tex-mode.el
+Prange, Michael D. (wrote) lisp/fortran.el
+Ram, Ashwin (wrote) lisp/refer.el
+Raymond, Eric S. (changed) [miscellaneous changes throughout]
+Raymond, Eric S. (changed) lisp/blackbox.el
+Raymond, Eric S. (changed) lisp/etags.el
+Raymond, Eric S. (changed) lisp/flow-ctrl.el
+Raymond, Eric S. (changed) lisp/mailalias.el
+Raymond, Eric S. (changed) lisp/tar-mode.el
+Raymond, Eric S. (wrote) lisp/asm-mode.el, lisp/gud.el, lisp/vc.el
+Reilly, Paul (changed) src/s/dgux.h
+Reilly, Paul (changed) src/xfns.c
+Reilly, Paul (changed) src/xmenu.c
+Reilly, Paul (wrote) src/s/dgux5-4r2.h
+Reilly, Paul (wrote) src/s/dgux5-4r3.h
+Reingold, Edward M. (changed) lisp/tex-mode.el
+Reingold, Edward M. (changed) man/calendar.texi
+Reingold, Edward M. (changed) man/text.texi
+Reingold, Edward M. (co-wrote) lisp/cal-mayan.el
+Reingold, Edward M. (wrote) lisp/cal-french.el
+Reingold, Edward M. (wrote) lisp/cal-menu.el
+Reingold, Edward M. (wrote) lisp/calendar.el
+Reingold, Edward M. (wrote) lisp/solar.el
+Riepel, Rob (wrote) lisp/tpu-doc.el
+Riepel, Rob (wrote) lisp/tpu-edt.el
+Riepel, Rob (wrote) lisp/tpu-extras.el
+Riepel, Rob (wrote) lisp/tpu-mapper.el
+Riepel, Rob (wrote) lisp/vt-control.el
+Roberts, Roland B (changed) lisp/files.el
+Roberts, Roland B (changed) lisp/sort.el
+Roberts, Roland B (changed) lisp/vms-patch.el
+Roberts, Roland B (changed) lisp/vmsproc.el
+Roberts, Roland B (changed) src/buffer.h
+Roberts, Roland B (changed) src/callproc.c
+Roberts, Roland B (changed) src/dired.c
+Roberts, Roland B (changed) src/process.c
+Roberts, Roland B (changed) src/sysdep.c
+Roberts, Roland B (changed) src/systty.h
+Roberts, Roland B (changed) src/vmspaths.h
+Roberts, Roland B (changed) vms/build.com
+Roberts, Roland B (changed) vms/compile.com
+Roberts, Roland B (changed) vms/kepteditor.com
+Roberts, Roland B (changed) vms/precomp.com
+Roberts, Roland B (wrote) lisp/vms-pmail.el
+Roberts, Roland B (wrote) vms/logout.com
+Roberts, Roland B (wrote) vms/mailemacs.com
+Robinson, John (wrote) lisp/term/bg-mouse.el
+Rosenblatt, William (wrote) lisp/float.el
+Rozas, Guillermo J. (changed) lisp/scheme.el
+Rozas, Guillermo J. (changed) lisp/xscheme.el
+Rozas, Guillermo J. (wrote) lib-src/fakemail.c
+Rupprecht, Wolfgang (changed) lisp/lisp-mode.el
+Rupprecht, Wolfgang (changed) lisp/loadup.el
+Rupprecht, Wolfgang (changed) lisp/sort.el
+Rupprecht, Wolfgang (changed) src/alloc.c
+Rupprecht, Wolfgang (changed) src/callint.c
+Rupprecht, Wolfgang (changed) src/config.h.in
+Rupprecht, Wolfgang (changed) src/crt0.c
+Rupprecht, Wolfgang (changed) src/data.c
+Rupprecht, Wolfgang (changed) src/fns.c
+Rupprecht, Wolfgang (changed) src/lisp.h
+Rupprecht, Wolfgang (changed) src/lread.c
+Rupprecht, Wolfgang (changed) src/m/sun3.h
+Rupprecht, Wolfgang (changed) src/print.c
+Rupprecht, Wolfgang (changed) src/ymakefile
+Rupprecht, Wolfgang (wrote) lisp/float-sup.el
+Rupprecht, Wolfgang (wrote) lisp/term/sup-mouse.el
+Rupprecht, Wolfgang (wrote) src/floatfns.c
+Salem, James B. (wrote) lisp/completion.el
+Schelter, William (wrote) lisp/telnet.el
+Schlumberger Technology Corporation (changed) lisp/gud.el
+Schmid, Gregor (wrote) lisp/tcl-mode.el
+Schnell, Ronald S. (wrote) lisp/dunnet.el
+Schnoebelen, Philippe (wrote) lisp/gomoku.el
+Schnoebelen, Philippe (wrote) lisp/mpuz.el
+Schoef, Stefan (wrote) lisp/bibtex.el
+Schoepf, Rainer (changed) src/alloc.c
+Schoepf, Rainer (changed) src/lisp.h
+Schoepf, Rainer (wrote) src/m/alpha.h
+Schoepf, Rainer (wrote) src/unexalpha.c
+Shivers, Olin (wrote) lisp/cmuscheme.el
+Shivers, Olin (wrote) lisp/comint.el
+Shivers, Olin (wrote) lisp/inf-lisp.el
+Shivers, Olin (wrote) lisp/shell.el
+Skoglund, Espen (wrote) lisp/pascal.el
+Sladkey, Rick (changed) lisp/gud.el
+Sladkey, Rick (changed) lisp/replace.el
+Sladkey, Rick (changed) lisp/simple.el
+Sladkey, Rick (changed) src/intervals.c
+Sladkey, Rick (changed) src/intervals.h
+Sladkey, Rick (wrote) lisp/backquote.el
+Smith, David M. (wrote) lisp/ielm.el
+Sommerfeld, William (wrote) lib-src/emacsclient.c
+Sommerfeld, William (wrote) lib-src/emacsserver.c
+Sommerfeld, William (wrote) lisp/scribe.el
+Sommerfeld, William (wrote) lisp/server.el
+Stallman, Richard (changed) [miscellaneous changes throughout]
+Stenhoff, Ake (co-wrote) lisp/imenu.el
+Stevens, Ken et al (wrote) lisp/ispell.el
+Stigelman, Jonathan (wrote) lisp/hilit19.el
+Stoller, Leigh (changed) lib-src/emacsclient.c
+Stoller, Leigh (changed) lib-src/emacsserver.c
+Stoller, Leigh (changed) lisp/server.el
+Strassman, Steve (wrote) lisp/spook.el
+Sugou, Shinichirou (changed) lib-src/etags.c
+Suhr, Steven (changed) src/scroll.c
+Sun Microsystems, Inc. (changed) lib-src/emacsclient.c
+Sun Microsystems, Inc. (changed) lib-src/emacsserver.c
+Sun Microsystems, Inc. (changed) lisp/server.el
+Sun Microsystems, Inc. (wrote) etc/emacs.icon
+Sun Microsystems, Inc. (wrote) etc/emacstool.1
+Sun Microsystems, Inc. (wrote) lib-src/emacstool.c
+Sun Microsystems, Inc. (wrote) lisp/term/sun-curs.el
+Sun Microsystems, Inc. (wrote) lisp/term/sun-fns.el
+Sun Microsystems, Inc. (wrote) lisp/term/sun-mouse.el
+Sun Microsystems, Inc. (wrote) lisp/term/sun.el
+Sun Microsystems, Inc. (wrote) src/sunfns.c
+Sylvan, Kayvan (changed) lisp/sc.el
+Thomas, Spencer (changed) lib-src/emacsclient.c
+Thomas, Spencer (changed) lib-src/emacsserver.c
+Thomas, Spencer (changed) lisp/server.el
+Thomas, Spencer (wrote) lisp/dabbrev.el
+Thomas, Spencer (wrote) src/unexec.c
+Thompson, Jim (wrote) lisp/ps-print.el
+Tower, Leonard H. Jr. (changed) lisp/rnews.el
+Tower, Leonard H. Jr. (changed) lisp/rnewspost.el
+Tromey, Tom (changed) lisp/buff-menu.el
+Tromey, Tom (changed) lisp/makefile.el
+Tromey, Tom (changed) lisp/man.el
+Tromey, Tom (changed) src/doc.c
+Tromey, Tom (changed) src/xfns.c
+Umeda, Masanobu (wrote) gnuspost.el
+Umeda, Masanobu (wrote) lib-src/tcp.c
+Umeda, Masanobu (wrote) lisp/gnus.el
+Umeda, Masanobu (wrote) lisp/gnusmail.el
+Umeda, Masanobu (wrote) lisp/gnusmisc.el
+Umeda, Masanobu (wrote) lisp/mhspool.el
+Umeda, Masanobu (wrote) lisp/nnspool.el
+Umeda, Masanobu (wrote) lisp/nntp.el
+Umeda, Masanobu (wrote) lisp/prolog.el
+Umeda, Masanobu (wrote) lisp/rmailsort.el
+Umeda, Masanobu (wrote) man/gnus.texi
+Vail, Jonathan (changed) lisp/vc.el
+Van Artsdalen, James (changed) src/s/usg5-4.h
+Van Artsdalen, James (changed) src/unexec.c
+Voelker, Geoff (changed) src/callproc.c
+Voelker, Geoff (changed) src/dired.c
+Voelker, Geoff (changed) src/editfns.c
+Voelker, Geoff (changed) src/fileio.c
+Voelker, Geoff (changed) src/keyboard.c
+Voelker, Geoff (changed) src/lisp.h
+Voelker, Geoff (changed) src/lread.c
+Voelker, Geoff (changed) src/sysdep.c
+Voelker, Geoff (changed) src/term.c
+Voelker, Geoff (co-wrote) src/makefile.nt
+Voelker, Geoff (wrote) lisp/makefile.nt
+Voelker, Geoff (wrote) lisp/winnt.el
+Voelker, Geoff (wrote) src/nt.c
+Voelker, Geoff (wrote) src/nt.h
+Voelker, Geoff (wrote) src/ntheap.c
+Voelker, Geoff (wrote) src/ntheap.h
+Voelker, Geoff (wrote) src/ntinevt.c
+Voelker, Geoff (wrote) src/ntproc.c
+Voelker, Geoff (wrote) src/ntterm.c
+Voelker, Geoff (wrote) src/s/windowsnt.h
+Vromans, Johan (wrote) lisp/forms.el
+Vromans, Johan (wrote) lisp/iso-acc.el
+Warsaw, Barry (changed) lisp/cplus-md.el
+Warsaw, Barry (changed) lisp/gud.el
+Warsaw, Barry (changed) src/syntax.c
+Warsaw, Barry (changed) src/syntax.h
+Warsaw, Barry (wrote) lisp/cc-mode.el [originally named lisp/cplus-md1.el]
+Warsaw, Barry (wrote) lisp/elp.el
+Warsaw, Barry (wrote) lisp/man.el
+Warsaw, Barry (wrote) lisp/regi.el
+Warsaw, Barry (wrote) lisp/reporter.el
+Warsaw, Barry (wrote) lisp/supercite.el
+Welinder, Morten (changed) src/editfns.c
+Welinder, Morten (changed) src/frame.c
+Welinder, Morten (changed) src/frame.h
+Welinder, Morten (changed) src/minibuf.c
+Welinder, Morten (changed) src/msdos.c
+Welinder, Morten (changed) src/sysdep.c
+Welinder, Morten (changed) src/xfaces.c
+Welinder, Morten (changed) src/xmenu.c
+Welinder, Morten (wrote) src/dosfns.c
+Welinder, Morten (wrote) [many MSDOS files]
+Welinder, Morten (wrote) lisp/desktop.el
+Welinder, Morten (wrote) lisp/term/pc-win.el
+Welinder, Morten (wrote) src/msdos.h
+Wells, Joseph Brian (wrote) lisp/apropos.el
+Wells, Joseph Brian (wrote) lisp/mail-extr.el
+Wells, Joseph Brian (wrote) lisp/resume.el
+Williams, Mike (wrote) lisp/mouse-sel.el
+Williams, Mike (wrote) lisp/thingatpt.el
+Willisson, Pace (wrote) lisp/ispell.el
+Wollman, Garrett (changed) lisp/sendmail.el
+Wood, Stephen A. (changed) lisp/fortran.el
+Worley, Dale (changed) lisp/mail-extr.el
+Zakharevich, Ilya (changed) lisp/simple.el [under the name modifier.el]
+Zawinski, Jamie (changed) src/bytecode.c
+Zawinski, Jamie (wrote) lisp/byte-opt.el
+Zawinski, Jamie (wrote) lisp/byte-run.el
+Zawinski, Jamie (wrote) lisp/bytecomp.el
+Zawinski, Jamie (wrote) lisp/disass.el
+Zawinski, Jamie (wrote) lisp/tar-mode.el
diff --git a/BUGS b/BUGS
new file mode 100644
index 0000000000..d78f0d71b0
--- /dev/null
+++ b/BUGS
@@ -0,0 +1,24 @@
+If you think you may have found a bug in GNU Emacs, please
+read the Bugs section of the Emacs manual for advice on
+(1) how to tell when to report a bug, and
+(2) how to write a useful bug report and what information
+it needs to have.
+
+There are three ways to read the Bugs section.
+
+(1) In a printed copy of the Emacs manual.
+You can order one from the Free Software Foundation;
+see the file etc/ORDERS.  But if you don't have a copy on
+hand and you think you have found a bug, you shouldn't wait
+to get a printed manual; you should read the section right away
+as described below.
+
+(2) With Info.  Start Emacs, do C-h i to enter Info,
+then m Emacs RET to get to the Emacs manual, then m Bugs RET
+to get to the section on bugs.  Or use standalone Info in
+a like manner.  (Standalone Info is part of the Texinfo distribution,
+not part of the Emacs distribution.)
+
+(3) By hand.  Do
+    cat info/emacs* | more "+/^File: emacs,  Node: Bugs,"
+
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000000..89ed31a19e
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,4270 @@
+1999-09-07  Gerd Moellmann  <gerd@gnu.org>
+
+	* configure.in (--with-sound): Removed.
+
+1999-08-30  Gerd Moellmann  <gerd@gnu.org>
+
+	* configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
+	the test for Xaw3d.
+	(HAVE_TIFF): Add -lm to library check.
+
+1999-08-28  Richard Stallman  <rms@gnu.org>
+
+	* configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
+	-lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
+	after the other X-related libraries.
+
+1999-08-21  Dave Love  <fx@gnu.org>
+
+	* configure.in: Don't check for jpeglib.h.
+
+1999-08-20  Gerd Moellmann  <gerd@gnu.org>
+
+	* configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
+	(HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
+
+1999-08-18  Dave Love  <fx@gnu.org>
+
+	* configure.in: : Check for termcap.h.
+
+1999-08-15  Gerd Moellmann  <gerd@gnu.org>
+
+	* configure.in: Add --with-toolkit-scroll-bars.  If "no",
+	use Emacs' scroll bars, even if configured for Motif or when
+	Xaw3d is available.
+
+1999-08-12  Wolfgang Rupprecht  <wolfgang@wsrcc.com>
+
+	* configure.in: Check for getaddrinfo.
+
+1999-08-04  Eli Zaretskii  <eliz@gnu.org>
+
+	* config.bat: Make --no-debug work again by removing -gcoff.
+
+1999-07-30  Dave Love  <fx@gnu.org>
+
+	* configure.in: Check for stdlib.h.
+
+1999-07-19  Dave Love  <fx@gnu.org>
+
+	* configure.in: Grok sparc64-*-linux-gnu*.
+
+1999-07-12  Richard Stallman  <rms@gnu.org>
+
+	* Version 20.4 released.
+
+1999-06-23  Karl Heuer  <kwzh@gnu.org>
+
+	* make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
+	Quote $EMACS, in case it's a program with args.
+
+1999-05-29  Richard M. Stallman  <rms@gnu.org>
+
+	* configure.in: Delete the Kerberos stuff.
+
+1999-05-27  Greg Hudson  <ghudson@mit.edu>
+
+	* configure.in: Prefer kerberos 5 names.
+
+1999-04-26  Richard M. Stallman  <rms@gnu.org>
+
+	* configure.in: Check for libXp.
+
+1999-04-08  Richard Stallman  <rms@gnu.org>
+
+	* make-dist: Include change logs in subdirs of `lisp'.
+
+1999-04-05  Richard Stallman  <rms@gnu.org>
+
+	* Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
+	(install-arch-indep): Make ${datadir}/emacs world-readable.
+
+1999-03-30  Eli Zaretskii  <eliz@gnu.org>
+
+	* config.bat: Use epaths.* instead of paths.*.
+
+1999-03-07  Eli Zaretskii  <eliz@gnu.org>
+
+	* INSTALL: Add detailed instructions to unpack and install
+	intlfonts on MS-DOS.
+
+1999-02-26  Richard Stallman  <rms@gnu.org>
+
+	* configure.in: Use epaths.h and epaths-force instead of paths....
+
+	* Makefile.in (epaths-force): Renamed from paths-force;
+	operate on epaths.in and produce epaths.h.
+
+1999-02-24  Richard Stallman  <rms@gnu.org>
+
+	* make-dist: Fix nt/icons directory handling.
+
+1999-02-22  Simon Josefsson  <jas@pdc.kth.se>
+
+	* configure.in (f301-fujitsu-uxpv4.1): New target.
+
+1999-02-20  Richard Stallman  <rms@gnu.org>
+
+	* make-dist (tempparent): Fix command to update info files.
+
+1999-02-09  Richard Stallman  <rms@gnu.org>
+
+	* configure.in (powerpc-apple-netbsd*): New alternative.
+
+1999-01-25  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* make-dist: Include the new directory nt/icons in distributions.
+
+1999-01-19  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* configure.in: Change message about HAVE_XFREE386.
+
+1999-01-07  Eli Zaretskii  <eliz@gnu.org>
+
+	* config.bat: Support configuring with leim.
+
+1998-12-16  Petri Kaurinkoski  <Petri.Kaurinkoski@hut.fi>
+
+	* configure.in (mips-sgi-irix6.5): New target.
+
+1998-12-16  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
+
+	* configure.in: Remove GSS-API support, since it has been removed
+	from movemail.
+
+1998-12-04  Markus Rost  <rost@delysid.gnu.org>
+
+	* Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
+
+1998-12-04  Andreas Schwab  <schwab@delysid.gnu.org>
+
+	* Makefile.in: Don't install customize info file.  Run
+	install-info on viper info file.
+
+1998-11-29  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
+
+1998-11-16  Kenichi Handa  <handa@etl.go.jp>
+
+	* configure.in (*-*-bsdi4*): New target.
+
+1998-11-13  Ehud Karni  <ehud@unix.simonwiesel.co.il>
+
+	* configure.in: Fix previous change.
+
+1998-11-11  Richard Stallman  <rms@gnu.org>
+
+	* configure.in (aviion-intel): New machine.
+
+1998-11-04  Kenichi Handa  <handa@etl.go.jp>
+
+	* configure.in (mips-nec-sysv4*): New target.
+
+1998-11-03  Andreas Schwab  <schwab@delysid.gnu.org>
+
+	* Makefile.in (install-arch-dep): Fix last change and use fns-*.el
+	from lisp.
+
+1998-10-31  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* make-dist: Don't include fns*.el in dist.
+
+1998-10-30  Dave Love  <fx@gnu.org>
+
+	* configure.in: Don't mkdir cpp.
+
+1998-10-30  Andreas Schwab  <schwab@delysid.gnu.org>
+
+	* Makefile.in (install-arch-dep): Install src/fns-*.el in
+	${archlibdir}.
+
+1998-08-19  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Version 20.3 released.
+
+1998-07-30  Paul Eggert  <eggert@twinsun.com>
+
+	* Makefile.in (Makefile, src/Makefile, src/config.stamp)
+	(lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
+	(lwlib/Makefile, leim/Makefile):
+	Prepend $(srcdir)/ to rule dependencies outside this dir.
+
+1998-06-30  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* configure.in: Use unset CDPATH instead of making it empty.
+
+1998-06-20  Karl Heuer  <kwzh@gnu.org>
+
+	* configure.in: Assume unspecified Solaris is 2.5, not 2.4.
+
+1998-06-07  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
+	and default.el.  Sort the results.
+
+1998-05-31  Karl Heuer  <kwzh@gnu.org>
+
+	* Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
+	writable.
+
+1998-05-14  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep):
+	Don't alter site-lisp/subdirs.el if it exists.
+
+1998-05-12  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Put `-' on commands to create
+	subdirs.el in site-lisp dirs.
+
+1998-05-07  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* Makefile.in (install-arch-indep): Fix typo in previous change.
+
+1998-05-06  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* Makefile.in (install-arch-indep): Pass --dir-file to install-info.
+
+1998-04-28  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* Makefile.in (mkdir): Create the site-lisp dirs.
+	(install-arch-indep): Make site-lisp/subdirs files world-readable.
+
+1998-04-26  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* Makefile.in (INSTALL_INFO): New variable.
+	(install-arch-indep): Don't replace the dir file if it already exists.
+	Use the install-info program, via INSTALL_INFO, to add entries.
+	Make the `info' subdir and the Info files world-readable.
+
+1998-04-16  Eli Zaretskii  <eliz@delysid.gnu.org>
+
+	* config.bat: Make sure the environment is large enough to support
+	all the "set foo=bar" commands.  Update pointers to DJGPP FTP
+	sites.
+
+1998-04-10  Karl Heuer  <kwzh@gnu.org>
+
+	* make-dist: Don't accept EMACS=t when testing for $EMACS set.
+
+1998-04-06  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
+
+	* configure.in: Add --with-gssapi to specify GSS-API
+	authentication support for movemail.
+
+1998-04-02  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Fix previous change.
+
+1998-03-30  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (info): Run man in build dir, not srcdir.
+
+1998-03-28  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Fix previous change.
+
+1998-03-23  Kenichi Handa  <handa@etl.go.jp>
+
+	* Makefile.in (top_distclean): Check the existence of `lock'
+	subdir.
+
+1998-03-22  Richard Stallman  <rms@gnu.org>
+
+	* Makefile.in (install-arch-indep): Put special subdirs.el files
+	in site-lisp dirs.  Use normal-top-level-add-subdirs-to-load-path.
+
+1998-03-21  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* make-dist: Fix shell syntax in check for missing .el or .elc files.
+
+1998-03-09  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
+	(m68*-hp-hpux*): Handle versions 1X like 10.
+
+1998-03-07  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* make-dist: PROBLEMS is now in etc, not top level dir.
+
+	* Makefile.in (SOURCES): Delete PROBLEMS.
+
+1998-02-25  Richard Stallman  <rms@gnu.org>
+
+	* configure.in (hppa*-hp-hpux*): Use hpux10 by default.
+
+	* Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
+
+1998-01-17  Richard Stallman  <rms@gnu.org>
+
+	* Makefile.in (install-arch-indep): Add semicolon before `else'.
+
+1998-01-02  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* make-dist (tempparent): New option --no-check.
+
+	* make-dist: Don't do anything with cpp directory.
+
+1997-12-20  Richard Stallman  <rms@psilocin.gnu.org>
+
+	* configure.in (sparc-fujitsu-sysv4*): New target.
+
+1997-12-17  Andreas Schwab  <schwab@gnu.org>
+
+	* configure.in: Cache more tests.  Add missing quotes around
+	message with embedded comma.
+
+1997-12-04  Karl Heuer  <kwzh@gnu.org>
+
+	* Makefile.in (unlock, relock): Don't reference cpp/ directory.
+
+1997-11-26  Joel N. Weber II  <devnull@gnu.org>
+
+	* make-dist: Changed the comment about `umask 0' to say `Don't
+ 	restrict access to any files.'; previously it said `Don't protect
+ 	any files', which may have implied that we think fascism is good.
+
+1997-11-24  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (AC_CHECK_FUNCS): Add strftime.  The new GNU C library
+	strftime needs the underlying host's strftime for locale dependent
+	formats.
+
+1997-11-20  Abraham Nahum  <miko@uxsrvc.tti.co.il>
+
+	* configure.in (i586-dg-dguxR4.*): New name in case branch.
+
+1997-11-20  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: Configure the man subdirectory.
+
+1997-11-07  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (AC_CHECK_LIB): Add -lintl.
+
+1997-11-07  Karl Heuer  <kwzh@gnu.org>
+
+	* make-dist (check for .elc files): Avoid bash-specific syntax.
+	(check for overflow 14-char limit): Simplify.
+
+1997-11-07  Richard Stallman  <rms@gnu.org>
+
+	* Makefile.in (install): Move blessmail last.
+
+1997-10-02  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (gettimeofday, one arg or two):
+	Clarify messages by avoiding double negative.
+
+1997-09-30  Karl Eichwalder  <ke@suse.de>
+
+	* Makefile.in (install-arch-indep): install the widget info file.
+
+1997-09-24  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
+
+	* configure.in (with-pop, with-kerberos): Need to check Kerberos
+	libraries in reverse order, so that libraries will appear in the
+	correct dependency order on the link line (and so that the
+	configure checks themselves will work properly when early
+	libraries depend on later ones).
+
+1997-09-21  Erik Naggum  <erik@naggum.no>
+
+	* make-dist (making links to `src'): Keep timestamp on copied
+	files.
+
+	* make-delta: New script to produce delta distributions.
+
+1997-09-19  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 20.2 released.
+
+1997-09-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 20.1 released.
+
+	* Makefile.in (install-leim): Depend on mkdir.
+	(leim): Depend on src.
+
+1997-09-13  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in: Recognize alpha* instead of just alpha.
+
+1997-09-12  Paul Eggert  <eggert@twinsun.com>
+
+	* leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
+
+1997-09-12  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* update-subdirs: Use rm -f.
+
+1997-09-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* update-subdirs: Delete subdirs.el if this dir has no subdirs.
+	Ignore subdirs named Old.
+	
+1997-08-04  Kenneth Stailey  <kstailey@elbereth.disclosure.com>
+
+	* configure.in: Add OpenBSD clause to set $machine.
+
+1997-09-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Recompile everything after updating various Lisp files.
+	Recompile in leim as well as lisp.
+	Check in leim as well as lisp for mismatched files and too-long names.
+	
+1997-09-03  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (TAGS tags): Simply refer this to the src subdir.
+
+1997-08-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
+	before trying to copy anything from it.
+
+1997-08-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (man/Makefile): New target.
+	(tags): Define env var EMACS and run Makefile from build dir.
+
+1997-08-27  Eli Zaretskii  <eliz@psilocin.gnu.ai.mit.edu>
+
+	* config.bat: If src/_gdbinit doesn't exist, try using
+	src/.gdbinit to create it (for building on Windows 95).
+
+1997-08-25  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep):
+	Discard extra data in tar | tar pipes.
+
+1997-08-24  NIIBE Yutaka  <gniibe@mri.co.jp>
+
+	* configure.in (x_default_search_path): Corrected
+	'${x_library}' to '${x_library}/X11'.
+
+1997-08-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
+
+1997-08-22  Jonathan I. Kamens  <jik@kamens.brookline.ma.us>
+
+	* configure.in: Support auto-configuration of both Kerberos V4 and
+ 	Kerberos V5 for movemail, including detection of V4 and V5 header
+ 	files and libraries.
+
+1997-08-16  NIIBE Yutaka  <gniibe@etl.go.jp>
+
+	* configure.in: Compute x_default_search_path
+	and substitute into makefiles.
+
+	* Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
+
+1997-08-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Run list-load-path-shadows.
+
+1997-08-07  Erik Naggum  <erik@naggum.no>
+
+	* configure.in: Remove lockdir, it is no longer needed.
+	* Makefile.in (mkdir): Don't create lockdir.
+	(lockdir): Variable deleted.
+	(paths-force): Don't operate on PATH_LOCK.
+
+1997-08-06  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* leim-Makefile.in (clean, distclean): New targets.
+
+	* make-dist: Include leim/ChangeLog in leim distribution.
+
+1997-08-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
+
+1997-07-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
+
+1997-07-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
+
+1997-07-25  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Update leim/leim-list.el.
+	Pass along value of $EMACS when updating lisp dir.
+
+1997-07-25  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
+
+	* configure.in (doug_lea_malloc): Make __after_morecore_hook a 
+	prerequisite to the use of Doug Lea's malloc.
+
+1997-07-21  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (top_distclean): Use -f to delete contents of lock dir.
+
+	* make-dist: Use name leim/SKK-DIC, not leim/SKK.
+
+1997-07-16  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
+
+1997-07-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (mips-sony-newsos6*): File news-risc.h renamed
+	to news-r6.h.
+
+1997-07-10  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: Use `sed' instead of `cp', which might not be
+	installed.
+
+1997-07-09  Kenichi Handa  <handa@etl.go.jp>
+
+	* Makefile.in (mostlyclean): Add cleaning leim directory.
+	(clean, distclean, maintainer-clean): Likewise.
+
+1997-07-09  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist (bogosities): Check subdirs of `lisp' also.
+
+1997-07-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist (etc): Really avoid symlinks now.
+	(lisp): Don't delete from subdirs the things we never copy.
+
+1997-07-07  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Correct the target name.
+	The first letter `i' was dropped by the previous change of mine.
+
+1997-07-06  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (leim/Makefile): Generate this.
+	(*-sysv4.2uw*): Recognize new alternative.
+
+	* leim-Makefile.in: Renamed from leim-Makefile.
+
+	* make-dist: Set up real-leim subdirectory,
+	with the real contents of leim; then move it to
+	a separate top-level directory.
+
+	* make-dist: Don't mention site-lisp, site-init, site-start
+	or default, when listing files hat are not compiled and should be.
+	
+	* configure.in: Create src/config.stamp at the end.
+
+1997-07-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-leim): Correct previous change.
+
+1997-07-02  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-leim): New target.
+	(install): Depend on install-leim.
+	
+1997-07-01  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (SUBDIR): Add leim.
+	(SUBDIR_MAKEFILES): Add leim/Makefile.
+	(leim/Makefile): New target.
+
+1997-07-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* leim-Makefile: New file.
+	* make-dist: Initialize a `leim' subdirectory with that makefile.
+
+1997-06-29  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (GNU_MALLOC_reason): Fix message text.
+
+1997-06-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist (lisp): Don't process subdirs that start with =.
+	(etc): Copy symlinks, as in src.
+
+1997-06-26  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (i*86-*-unixware*): New alternative.
+
+1997-06-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (src/config.stamp): Target renamed from src/config.h
+	and touch it explicitly.
+
+	* configure.in (mips-sony-newsos6*): New alternative.
+	(mips-*-linux-gnu*): New alternative.
+	(*-*-bsdi*): New alternative.
+	(i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
+
+1997-06-22  Dave Love  <d.love@dl.ac.uk>
+
+	* Makefile.in (lib-src): Depend on src/config.h (e.g. for
+ 	movemail.o).
+	(src/config.h): New target to re-configure if src/config.in
+ 	is patched.
+
+1997-06-18  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (shutdown): Check for `shutdown' function.
+
+1997-06-18  Ken'ichi Handa  <handa@psilocin.gnu.ai.mit.edu>
+
+	* update-subdirs: Include the directory "language" in subdirs.
+
+1997-06-01  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (m88k-dg-dgux4*): New alternative.
+	(alpha-*-netbsd*): New alternative.
+	(powerpcle-*-solaris2*): New alternative.
+
+1997-05-20  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Warn about .el files that are not compiled.
+
+1997-05-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (dist): Don't run update-subdirs here,
+	since make-dist now gets that done.
+
+	* make-dist: Use the new `updates' target in lisp/Makefile.
+	
+	* make-dist: Use new non-file targets in lisp/Makefile.
+
+1997-04-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Handle all subdirs of `lisp' uniformly.
+	Don't handle `term' and `language' specially.
+	Clear out umask at the beginning.
+	
+1997-04-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist: Use Make to update finder-inf.el and autoloads.
+	Also update cus-load.el.
+
+1997-04-09  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
+
+	* configure.in (doug_lea_malloc):  First check for SYSTEM_MALLOC,
+	in case it is desirable to disable the GNU malloc features with
+	glibc.
+
+1997-04-08  Marcus G. Daniels  <marcus@cathcart.sysc.pdx.edu>
+
+	* configure.in (DOUG_LEA_MALLOC):
+	Define if malloc_{get,set}_state exist.
+
+1997-03-05  Ken'ichi Handa  <handa@etl.go.jp>
+
+	* make-dist: Make links for files under lisp/language.
+
+1997-02-20  Kenichi Handa <handa@etl.go.jp>
+
+	* update-subdirs: Exclude the directory "language" from subdirs.
+
+1997-01-26  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* configure.in: Check for rint and cbrt.
+
+1997-01-01  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* make-dist: Use $EMACS to say where to run Emacs.
+	Add --no-update option.
+	
+1996-12-30  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
+
+1996-12-28  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* make-dist (copying src): Check thoroughly for symlinks
+	and copy them in all cases.  Regularize the linking of *.in
+	and *.opt and ChangeLog files.
+	(copying lib-src): Likewise.
+	Don't rm getdate.c or y.tab.*--they don't exist any more.
+	
+1996-12-18  Jonathan I. Kamens  <jik@annex-1-slip-jik.cam.ov.com>
+
+	* configure.in: Check for libmail, maillock.h and
+	touchlock (for movemail).
+
+1996-12-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (limits.h): Check for this file.
+
+1996-12-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (rs6000-ibm-aix4.2): New alternative.
+	(rs6000-ibm-aix4.0): New alternative.
+	(rs6000-ibm-aix4*): Assume aix 4.1 by default.
+
+1996-11-22  Ben Harris  <bjh21@cam.ac.uk>
+
+	* configure.in: Recognize vax-*-netbsd*.
+
+1996-11-06  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in (locallisppath): Add leim directory.
+
+1996-10-31  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: Make sure `mv' supports forward slashes and -f.
+
+1996-10-28  Christian Limpach  <chris@nice.ch>
+
+	* configure.in (hppa*-next-nextstep*): * added after hppa
+	to accept hppa1.0 and hppa1.1.
+
+1996-10-05  Marcus G. Daniels  <marcus@coulee.tdb.com>
+
+	* configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
+	* configure.in (ld_switch_machine): Fix typo.
+
+1996-09-28  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
+	from config.h and use them in $ac_link.
+
+1996-09-28  Erik Naggum  <erik@psilocin.gnu.ai.mit.edu>
+
+	* configure.in: Create a subdir named `lisp'.
+
+1996-09-24  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in: Check for getcwd.
+
+1996-09-04  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in: Check for termios.h.  Check for setpgid. 
+
+1996-08-31  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in: Check for setrlimit.
+
+1996-08-31  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
+
+1996-08-28  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in: Check for utimes.
+
+	* configure.in: Check for com_err library, but only
+	if --with-kerberos was used.  Check for krb and des
+	only if --with-kerberos.
+
+1996-08-26  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* Makefile.in (INSTALL_STRIP): New variable.
+	(install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
+	(install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
+
+1996-08-25  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in: Check for krb and des libraries.
+
+1996-08-24  Richard Stallman  <rms@ethanol.gnu.ai.mit.edu>
+
+	* configure.in (*-sunos4.1.[3-9]*noshare):
+	Use sunos413, not sunos4-1-3.
+	(m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
+	(arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
+	
+1996-08-22  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (src/paths.h): Target deleted.
+	(paths-force): Delete all dependencies on this target
+	but don't delete the target.
+	(install): Depend on `all'.
+	(paths-force): Don't print a message.
+
+	* configure.in: Generate src/paths.h here.
+
+1996-08-18  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
+	New variables that affect linking only.
+	(alpha-dec-osf*): Use those instead of previous change.
+
+1996-08-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Install info/messages.
+
+1996-08-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 19.33 released.
+
+1996-08-10  Marcus Daniels  <marcus@sayre.sysc.pdx.edu>
+
+	* configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
+	Fix previous change.
+
+1996-08-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
+	New alternative.
+
+1996-08-07  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
+	and NON_GCC_TEST_OPTIONS.
+
+1996-08-06  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (LOCALTIME_CACHE): Don't put a string literal
+	"TZ=..." in environ.
+
+1996-08-04  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
+
+1996-08-03  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (*-sunos4.1.[3-9]*noshare): Move this before
+	the more general *-sunos4.1.[3-9]* clause.
+
+1996-07-31  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 19.32 released.
+
+	* configure.in (*-sco3.2v5*):
+	Set OVERRIDE_CPPFLAG to a string of one space.
+	Fix the code that uses OVERRIDE_CPPFLAG.
+
+1996-07-16  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* configure.in: Undo previous change.
+
+1996-07-16  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* config.sub: Use `pc', not `unknown', when canonicalizing
+	the vendor for ...86.
+
+1996-07-15  David Mosberger-Tang <davidm@AZStarNet.com>
+
+	* configure.in: Check for termios.h header.
+
+1996-07-11  Bill Mann  <dvmann@dvncr.praxisint.com>
+
+	* configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
+
+1996-07-07  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* configure.in: Split bsdos2 and bsdos2-1.
+
+1996-07-06  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* config.sub: If last two words are not a recognized
+	KERNEL-OS pair, use just the last word as OS, as in 19.31.
+	Make conversion of gnu/linux to linux-gnu really work.
+	
+	* config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
+
+1996-06-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (check for using Lucid widgets by default):
+	Eliminate indentation that confuses some compilers.
+
+1996-06-29  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* config.sub: Convert linux and gnu/linux to linux-gnu.
+
+	* make-dist: Don't update getdate.c.
+	Ignore =... files when checking for too-long Lisp file names.
+
+1996-06-28  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (euidaccess): Check for that, not for eaccess.
+
+1996-06-27  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
+ 	before `noshare'.
+	(mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
+
+1996-06-21  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in: Rename lignux to linux-gnu in configuration names.
+	Use gnu-linux as the opsys value (s/ file name).
+	Allow i686 just like i386, i486, i586.
+
+1996-06-20  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (i*86-*-sco3.2v5): New alternative.
+	(OVERRIDE_CPPFLAG): New variable.
+	(CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
+
+	* configure.in: Specify vpath for .texi files.
+
+1996-06-09  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in: Always check for HAVE_X11R5.
+	Separately decide whether to use a toolkit by default.
+
+1996-06-04  Bill Mann  <dvmann@dvhpux1.praxisint.com>
+
+	* configure.in: If X11R5 is missing the Xaw headers,
+	default to --with-x-toolkit=no.
+
+1996-05-31  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
+
+1996-05-30  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): If cd etc makes output,
+	don't treat that as part of the tar data.
+	Check that ./lisp actually exists.
+	
+1996-05-29  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* make-dist: Check for long file names.
+
+1996-05-25  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* Version 19.31 released.
+
+1996-05-25  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* configure.in: Recognize sparc-*-lignux.
+
+1996-05-03  Richard Stallman  <rms@delasyd.gnu.ai.mit.edu>
+
+	* make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
+	Don't include config.w95.
+
+1996-04-21  Richard Stallman  <rms@delasyd.gnu.ai.mit.edu>
+
+	* make-dist: Replace --no-clean-up and --no-tar options
+	with --clean-up and --tar, so that the default is useful.
+
+1996-04-15  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: Make sure the GDB init file is called src/_gdbinit;
+	if not, tell the user to rename it and abort.
+
+1996-04-14  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
+	test program.
+
+1996-04-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* config.bat (djgpp_ver): Variable renamed from djgpp-ver.
+
+	* make-dist (MANIFEST): Fix previous change.
+	(msdos): Put mainmake.v2 into the dist.
+
+1996-04-10  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
+
+	* make-dist: Exit if autoconf fails.
+
+1996-04-10  Eli Zaretskii  <eliz@is.elta.co.il>
+
+	* config.bat: Set djgpp-ver, and unset it at the end.
+	Add a number ofconditionals for DJGPP version 2.
+	Rename label libsrc2 to libsrc3.
+	Substitute for LDFLAGS in src/Makefile.
+	Substitute for ALL_CFLAGS in lib-src/Makefile.
+
+1996-04-08  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (ncurses): Check this after checking fns like strerror.
+
+1996-04-08  Erik Naggum  <erik@naggum.no>
+
+	* make-dist (MANIFEST): Don't include lines from =files.
+
+1996-04-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Don't put lisp/dired.todo in the dist.
+
+1996-04-05  Richard Stallman  <rms@lucy.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_NCURSES): Look for library named ncurses.
+
+	* configure.in (setlocale): Check for it.
+
+	* configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
+	
+1996-03-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Use lignux instead of linux as value of opsys.
+
+1996-03-22  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-strip): Fix whitespace.
+	Get rid of continuation.
+
+	* config.sub: Convert linux or gnu/linux to lignux.
+
+1996-03-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Accept lignux in configuration name.
+
+1996-03-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-strip): New target.
+
+1996-03-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
+	-f failed to do the job on Suns.
+
+1996-03-13  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
+
+	* configure.in (linux/version.h): Check for this header.
+
+1996-03-12  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
+
+	* configure.in: Remove -fno-builtin hackery from -lm check.
+
+1996-03-08  Roland McGrath  <roland@charlie-brown.gnu.ai.mit.edu>
+
+	* configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
+ 	just this test.
+
+	* configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
+
+1996-03-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Check for ncurses.
+
+1996-02-28  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (LOCALTIME_CACHE):
+	Also define if localtime mishandles unsetting TZ.
+	This works around a localtime bug in mips-dec-ultrix.
+
+1996-02-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
+
+	* configure.in: Improve messages about X versions.
+
+1996-02-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
+
+1996-02-23  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_X11XTR6): Set it as a shell variable.
+	(HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
+
+	* Makefile.in (install-arch-dep): Depend on install-arch-indep.
+	(install): Put install-arch-indep before install-arch-dep.
+
+1996-02-20  Dave Love  <d.love@dl.ac.uk>
+
+	* INSTALL: Clarify info about MS-DOS path handling.
+
+1996-02-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Install info/ccmode*.
+	In previous change, protect against /bin/pwd returning null string.
+
+1996-02-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
+	to lispdir.
+
+1996-02-01  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
+
+1996-01-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
+
+1996-01-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (extraclean): Use ${top_distclean} to ensure
+	we delete everything distclean deletes.
+
+1996-01-23  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* make-dist (lwlib): Don't distribute lwlib-Xol* files.
+
+1996-01-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
+	into LDFLAGS instead of into LIBS.
+
+1996-01-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_XMU): Fix typo in previous change.
+
+1996-01-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
+
+1996-01-10  Erik Naggum  <erik@naggum.no>
+
+	* configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
+
+1996-01-10  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Ignore error if no chmod -R.
+
+1996-01-10  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
+	and use -lXt to link it.
+
+1996-01-08  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* configure.in (locallisppath): Put version-specific dir first.
+
+1996-01-07  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* configure.in (hppa-*-nextstep*): New alternative.
+	(USE_X_TOOLKIT): By default, set this to "maybe";
+	and change that later to LUCID or "no" according to X11 version.
+
+	* make-dist: Recompile outdated .elc files and update all autoloads.
+
+1996-01-05  Roland McGrath  <roland@churchy.gnu.ai.mit.edu>
+
+	* configure.in (locallisppath): Fix typo in last change: " -> '.
+
+1996-01-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
+
+1995-12-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Give all files read permission.
+
+1995-12-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
+	If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
+
+1995-12-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Determine HAVE_X11R6.
+	(HAVE_MENUS): Renamed from HAVE_X_MENU.
+
+1995-12-21  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* configure.in: Just "solaris" now defaults to version 2.4.
+	Add sunos4.1.n-noshare as alternative.
+
+1995-12-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
+
+1995-11-29  Erik Naggum  <erik@naggum.no>
+
+	* Makefile.in (install-arch-indep): Add missing backslash.
+
+1995-11-29  Karl Eichwalder  <ke@ke.Central.DE>
+
+	* Makefile.in (install-arch-indep): Don't install
+	lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
+
+1995-11-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Fix previous change.
+
+	* configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
+
+1995-11-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.30 released.
+
+	* make-dist (lisp): Exclude subdirs.el.
+
+1995-11-22  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist (etc): Delete *.orig and *.rej.
+
+1995-11-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Rename old info/dir only if exists.
+
+1995-11-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
+
+1995-11-14  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* make-dist (nt): Rename install, readme, and todo to
+	INSTALL, README, and TODO.
+
+1995-11-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist (lisp): Don't distribute site-start.
+
+1995-11-06  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* make-dist: Break the hard link on alloca.c.
+
+1995-11-04  Richard Stallman  <rms@whiz-bang.gnu.ai.mit.edu>
+
+	* configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
+
+1995-11-02  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* make-dist (src, lib-src): Don't distribute Makefile.c.
+	(etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
+
+1995-10-31  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (mkdir): Create man1dir, not mandir.
+	(uninstall): Use man1dir, not mandir.
+
+1995-10-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (man1dir): New variable.
+ 	(install-arch-indep): Use man1dir.
+
+	* configure.in (sparc-*-nextstep*): Remove incorrect .h's.
+
+	* make-dist: Create lisp/MANIFEST.
+
+1995-10-28  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
+
+	* configure.in (m68k-*-linux*): New alternative.
+
+1995-10-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Use new names config.in, paths.in, and
+	{src,lib-src}/Makefile.in.
+
+1995-10-25  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Don't bother checking for drem.
+
+1995-10-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (distclean): Delete line with just a tab in it.
+	(install-arch-indep): Delete spaces that precede tabs.
+	Delete spurious `fi' left from previous change.
+	(install): Supply `true' as command, to avoid null command.
+
+1995-10-05  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
+
+1995-09-30  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (powerpc-*-solaris2): New alternative.x
+
+1995-09-12  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
+	of paths.h.tmp$$, to avoid going beyond 14 characters.
+
+1995-09-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Improve error msg for invalid --with-x-toolkit value.
+
+1995-09-06  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in (LOCALTIME_CACHE): Define if tzset exists and
+	if localtime caches TZ.  Check for tzset.
+
+1995-09-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* config.bat: Simplify using new names file names src/makefile.in,
+	config.in, paths.in.  Change Echo commands not to use `.
+
+1995-08-31  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Always install the new dir file;
+	rename the previous dir file to dir.bak or dir.old.
+
+1995-08-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (RANLIB): Substitute this into makefiles.
+	Set it specially on solaris; set it by default on other systems.
+
+	* configure.in: Fix previous Alpha change.
+
+1995-08-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
+	NON_GCC_TEST_OPTIONS.
+
+1995-08-10  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
+	from config.h, use SPECIFIED_CFLAGS to get what the user specified.
+
+	* configure.in (alpha-*-linux*): New configuration.
+
+1995-08-05  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (m68*-next-*): Use m68k.h and nextstep.h.
+	(m68k-next-nextstep*): New alias for that.
+	(i*86-*-nextstep*): Use nextstep.h.
+	(sparc-*-nextstep*): New configuration.
+
+1995-08-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
+	And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
+
+1995-07-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Handle sunos4shr by sharing; not like sunos4*.
+	Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
+
+1995-07-18  Mike Long  <mike.long@analog.com>
+
+	* make-dist: Fix update of finder-inf.el, and byte-compile it.
+
+1995-07-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (src/paths.h, paths-force):
+	Rename src/paths.h.in to src/paths.in.
+	(Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
+
+	* configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
+	Use Makefile.c for intermediate file.
+	Rename src/config.h.in to src/config.in.
+
+1995-07-17  Richard Stallman  <rms@gnu.ai.mit.edu>
+
+	* configure.in (mips-dec-ultrix*): Assume version 4.3.
+	(mips-dec-ultrix4.[12]): New alternative for old versions.
+
+1995-07-06  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* make-dist: Don't break intra-tree links.
+
+1995-07-06  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
+
+	* configure.in: Put back archlibdir initialization.  Require
+ 	autoconf 2.4.1 or later.
+
+1995-07-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
+	(mips-mips-riscos5*): New alternative.
+
+1995-06-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
+
+1995-06-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (bindir, datadir, sharedstatedir, libexecdir)
+	(mandir, infodir, archlibdir): Initializations deleted.
+
+	* configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
+	On hpux9shr, use hpux9shxr4.h.
+
+1995-06-24  Morten Welinder  <terra+@cs.cmu.edu>
+
+	* configure.in: Added target mips-dec-mach_bsd4.3.
+	* config.guess: Guess mips-dec-mach_bsd4.3.
+
+1995-06-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (mkdir): Use symbolic chmod.
+
+1995-06-22  Paul Eggert  <eggert@twinsun.com>
+
+	* configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
+	(Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
+
+1995-06-22  Paul Eggert  <eggert@twinsun.com>
+
+	* Makefile.in (SUBDIR_MAKEFILES):
+	Add man/Makefile, so `make distclean' removes it.
+	(top_distclean): Add config.log to the list of files to be removed.
+
+1995-06-19  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.29 released.
+
+1995-06-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Fix the previous change to verify that the -b
+	option really solves the problem.
+
+	* make-dist (nt): Explicitly include makefile.nt and makefile.def only.
+
+1995-06-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
+
+1995-06-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Report more clearly when there is no special
+	dir to search for X includes or libraries.
+
+1995-06-13  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Check for -lpthreads, not -lpthread.
+
+1995-06-09  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
+
+1995-06-08  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Check for -lpthread.
+
+1995-06-05  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Install info files for mh-e.
+	(uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
+
+1995-06-01  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in (*-solaris2.5): New configuration.
+
+	* make-dist: Copy new files config.nt and config.w95.
+
+1995-05-30  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Use x_includes, not x_libraries, for -I.
+	Make bitmapdir a colon-separated list.
+
+1995-05-27  Richard Stallman  <rms@gnu.ai.mit.edu>
+
+	* configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
+
+	* configure.in: Allow x_libraries and x_includes to be paths.
+
+1995-05-25  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Fix typo.
+
+1995-05-24  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* INSTALL: Clarify use of site-init.el.
+
+1995-05-22  enami tsugutomo  <enami@sys.ptg.sony.co.jp>
+
+	* configure.in: pass arg to sqrt.
+
+1995-05-18  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* make-dist: Fix May 6 change.
+
+1995-05-17  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* vpath.sed: Delete reference to ymakefile.
+
+1995-05-09  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
+
+	* configure.in: Use sqrt (more portable) instead of fmod in -lm
+        check.
+
+1995-05-09  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
+
+	* update-subdirs: Specify /bin/sh to run the script.
+
+1995-05-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Put src/makefile.nt in dist.
+
+	* configure.in (i[345]86-*-bsdi2*): New configuration.
+	(vax-dec-bsd386*): Deleted.
+
+1995-05-06  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
+
+	* configure.in: Make sure CDPATH doesn't mess up PWD check.  Check
+	whether X bitmaps are in X11/bitmaps instead of bitmaps.  Use fmod
+	instead of logb in -lm check.
+
+1995-05-03  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
+	Use bsd4-3.  Don't set NON_GNU_CPP.
+
+	* make-dist: Don't copy in src/s/*.inp.  Don't copy nt/src.
+	In nt. copy various different things, but not *.cmd.
+	Fix the ln commands for the subdirs of nt.
+
+1995-04-29  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
+
+1995-04-27  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in (*-sun-sunos4.1.3*): Use shared libraries,
+	since that's what the header file expects.
+
+1995-04-24  Francesco Potorti`  (pot@cnuce.cnr.it)
+
+	* configure.in (m68k-motorola-sysv*): Distinguish between 68030
+	and 68040 based machines when choosing options for gnucc.
+
+1995-04-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (top_distclean): Delete config.cache.
+
+1995-04-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
+
+	* configure.in: Use m/ncr386.h.
+
+1995-04-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Undo Sep 23 change.
+
+1995-04-06  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
+	(man): Don't copy texindex.c and getopt.c; they're deleted.
+	(etc): Omit `e'; it's a subdirectory.
+	(etc/e): Use `../..', not `..', to reference top level.
+
+1995-04-06  Simon Leinen  <simon@lia.di.epfl.ch>
+
+	* Makefile.in (install-arch-indep, dist):
+	look for `update-subdir' in $(srcdir).
+
+1995-04-06  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Include mkinstalldirs in distribution.
+
+1995-04-05  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* make-dist: Add missing close backquote.
+
+1995-04-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Don't distribute shortnames directory.
+
+1995-03-12  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (blessmail): Pass archlibdir to the sub-make.
+
+1995-02-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
+
+1995-02-23  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
+
+1995-02-13  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
+
+	* configure.in (mips-sgi-irix6): New configuration.
+
+1995-02-07  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
+
+	* Makefile.in (maintainer-clean): Renamed from realclean.
+
+1995-02-02  David J. MacKenzie  <djm@geech.gnu.ai.mit.edu>
+
+	* configure.in: Create a .gdbinit that sources the real one, if
+	using a different build directory.
+
+1995-01-23  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* configure.in: Check for sys/select.h.
+
+1995-01-02  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
+
+1994-12-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Handle isc 4.1 operating system.
+
+1994-12-10  Richard Stallman  <rms@kepa>
+
+	* configure.in (rs6000-ibm-aix4.1*): New alternative.
+	(rs6000-ibm-aix4*): New alternative.
+
+1994-12-06  Richard Stallman  <rms@kepa>
+
+	* configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
+
+1994-11-30  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
+
+	* configure.in: Don't try to make directories that are guaranteed
+        to already exist.
+
+1994-11-23  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Generate man/Makefile from man/Makefile.in.
+	Create the man subdir.
+
+	* Makefile.in (dvi): Run Make in our man subdir.
+
+	* make-dist: Create subdir etc/e.
+	Make links to it.
+	Put man/Makefile.in in dist, instead of man/Makefile.
+
+1994-11-21  David J. MacKenzie  (djm@mole.gnu.ai.mit.edu)
+
+	* configure.in: Add --with-pop, --with-kerberos, and
+	--with-hesiod for movemail.
+
+1994-11-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (m68*-apollo*): Use s/domain.h.
+
+1994-11-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (m68*-apollo*): Set NON_GNU_CPP.
+
+1994-11-14  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
+
+	* configure.in: Don't add -I, -L, -R options for cc if their
+	arguments would be empty.
+
+1994-11-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (i860-intel-osf1*): New alternative.
+	(mips-sgi-irix5.[01]*): Distinguish from irix5*.
+	(mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
+
+1994-11-09  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
+
+	* configure.in: Make h_errno check not use nested functions.
+
+1994-11-09  Richard Stallman  <rms@pogo.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
+
+1994-11-08  Roland McGrath  <roland@churchy.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Avoid continued comment
+        swallowing target line.
+
+1994-11-08  David J. MacKenzie  (djm@churchy.gnu.ai.mit.edu)
+
+	* configure.in: Protect a character class with `changequote'.
+
+1994-11-07  Karl Heuer  <kwzh@nutrimat.gnu.ai.mit.edu>
+
+	* configure.in: Accept `news' as a synonym for `newsos'.
+
+1994-11-03  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* Makefile.in: Don't rm files if cd fails.
+
+1994-11-01  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Put nt subdir and its subdirs in the dist.
+	(lib-src): Put makefile.nt in the dist.
+	(lisp): Put makefile.nt in the dist.
+
+1994-10-29  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
+
+	* configure.in: Change a stray `[' to `test'.
+
+1994-10-28  David J. MacKenzie  <djm@duality.gnu.ai.mit.edu>
+
+	* configure.in: Adapt for Autoconf v2.  Use the standard argument
+	parser, host type canonicalizer, X11 finder, and message
+	printing macros.  Use the new macro names.  Use `test' instead of `['.
+
+1994-10-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Check for getpagesize.
+
+1994-10-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist (msdos): Put sed* in the distribution.
+
+1994-10-17  Morten Welinder  <terra@mole.gnu.ai.mit.edu>
+
+	* config.bat: New option, `--with-x', for configuring Emacs
+	for use with the X11 system DesqView/X.
+	New option, `--no-debug', for compiling Emacs without debug
+	information thus saving disk space.
+	(src/config.h, src/paths.h): Use `update' (which is like
+	`move-if-changed') to change the file.
+	(src/config.h): When configuring for X11 perform extra changes.
+	(src/makefile): When configuring for X11 perform extra changes.
+	(lib-src): Remove temporary files.
+	(): Check that `sed', `rm', `mv', and `gcc' are available.
+
+1994-10-17  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
+
+	* configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
+
+1994-10-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (EMACS_CONFIGURATION): Use $canonical as value.
+
+	* configure.in (canonical): Substitute var into makefiles.
+	(bitmapdir): Likewise.
+
+	* Makefile.in (bitmapdir): New variable.
+	(src/paths.h, paths-force): Edit PATH_BITMAPS.
+
+1994-10-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
+
+	* Makefile.in (dist, install-arch-indep): Run update-subdirs.
+	* update-subdirs: New shell script.
+
+1994-10-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (top_distclean): Don't rm build-install.
+	(SOURCES): Delete build-install.in.
+
+	* make-dist: Don't distribute build-ins.in.
+	* build-ins.in: File deleted.
+
+1994-10-12  David J. MacKenzie  (djm@duality.gnu.ai.mit.edu)
+
+	* Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
+
+1994-10-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in: Use libexecdir and sharedstatedir as appropriate.
+
+	* configure.in (libexecdir): Renamed from libdir.  New default.
+	(sharedstatedir): Renamed from statedir.  New default.
+	(datadir): New default.
+
+	* make-dist: Don't distribute subdirs.el.
+
+1994-10-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (eaccess): Check for it.
+
+1994-10-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (mktime): Check for it.
+
+1994-10-02  Paul Reilly  <pmr@geech.gnu.ai.mit.edu>
+
+	* configure.in (motif): Add support for usage and option checking.
+
+1994-09-24  Richard Stallman  <rms@churchy.gnu.ai.mit.edu>
+
+	* configure.in (utimes): Check for it.
+
+1994-09-23  Richard Stallman  <rms@churchy.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Don't do mkdir here.
+
+1994-09-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
+	riscix.h renamed to acorn.h.
+
+1994-09-21  Michael Ben-Gershon (mybg@cs.huji.ac.il)
+
+	* configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
+	New configurations.
+
+1994-09-21  David J. MacKenzie  (djm@geech.gnu.ai.mit.edu)
+
+	* configure.in: Remove trailing slashes from srcdir.
+
+1994-09-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (i[345]86-sequent-ptx*): Handle
+
+1994-09-20  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (paths-force): Depend on src/paths.h
+
+1994-09-19  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* configure.in (config_options): Save all arguments, not just some.
+
+1994-09-18  Karl Heuer  <kwzh@hal.gnu.ai.mit.edu>
+
+	* Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
+
+	* configure.in: Add AC_AIX.
+	Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
+
+1994-09-18  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (parsing options): Simplify sed command to delete -'s.
+
+1994-09-16  Karl Heuer  <kwzh@churchy.gnu.ai.mit.edu>
+
+	* configure.in (config_options): New shell variable.
+	Pass its value to C code in EMACS_CONFIG_OPTIONS.
+
+1994-09-16  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (alpha-dec-osf*): New target.
+
+	* Makefile.in: Use just one FRC target.
+
+1994-09-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (removenullpaths, paths-force):
+	Use name paths.h.tmp$$, which depends on the pid.
+
+1994-09-14  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Makefile.in (removenullpaths, paths-force):
+	Put paths.h.tmp in top-level dir, not in src.
+
+1994-09-11  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.27 released.
+
+1994-09-07  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.26 released.
+
+1994-09-04  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Check for lrand48, not rand48.
+
+1994-09-03  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
+	(powerpc-ibm-aix*): New aliases.
+
+1994-08-21  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist (src/m, src/s): Put *.inp in distribution.
+
+1994-08-19  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Accept i586 and i486 along with i386.
+
+1994-08-15  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Do compute unexec, LIBX, system_malloc, etc
+	even if CPP env var was set by the user.
+
+	* configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
+
+1994-08-14  Jonathan I. Kamens  (jik@gza-client1.aktis.com)
+
+	* Makefile.in: Uninstall "$(EMACS)", not "emacs".
+
+1994-08-13  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
+
+1994-08-09  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Check more specifically for i*86-sun-sunos.
+
+1994-08-03  Caveh Jalali  (caveh@eng.sun.com)
+
+	* configure.in: Handle solaris 2.4.
+
+1994-07-27  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (rand48): Check for it.
+
+1994-07-26  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* make-dist: Update the info files.
+
+1994-07-25  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in: Make "checking..." messages' style consistent.
+	(HAVE_H_ERRNO): New test.
+
+1994-07-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
+
+1994-07-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (CFLAGS): If the envvar was specified, use that.
+	And set REAL_CFLAGS from it too.
+
+1994-07-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Update finder-inf.el.
+
+1994-07-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist (msdos): Include sed4.inp in dist.
+
+	* Makefile.in (libsrc_libs): Var deleted.
+
+1994-07-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
+
+1994-06-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (mips-sony-newsos4*): New alias.
+
+1994-06-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (*-convex-bsd*): Set NON_GNU_CPP.
+	(*-convex-convexos*): Accept this as alias.
+
+1994-06-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
+	for two different uses.
+
+1994-06-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
+
+1994-06-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Put ./BUGS into the distrib.
+
+1994-06-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Handle 386 running Solaris 2.
+
+1994-06-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
+
+1994-06-05  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (mips-sony-newsos*): Use news-risc.h.
+
+	* configure.in: Accept bsdi as opsys, like bsd386.
+
+1994-06-01  Morten Welinder  (terra@diku.dk)
+
+	* config.bat (src/paths.h): Use sed script msdos/sed4.inp.
+
+1994-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.25 released.
+
+	* make-dist (shortversion): Don't assume another period follows.
+
+1994-05-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
+	(uninstall): Use /bin/pwd.
+
+	* Makefile.in (blessmail): Depend on src.
+	(all): Don't depend on blessmail.
+
+	* Makefile.in (src/paths.h): Don't force recomputation.
+	(paths-force): New target; force recomputation of paths.h.
+	(all): Depend on paths-force.
+	(src, lib-src): Depend on src/paths.h.
+
+	* configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
+	NON_GCC_TEST_OPTIONS.
+
+1994-05-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Don't insist on subversions for irix.
+
+1994-05-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (hppa*-hp-hpux9shr): Move alternative up.
+
+	* configure.in (i[34]86-next-*): New alternative.
+
+1994-05-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.24 released.
+
+	* configure.in: New config hppa*-hp-hpux9shr*.
+
+1994-05-22  Morten Welinder  (terra@tyr.diku.dk)
+
+	* config.bat: Doc fix.
+
+1994-05-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (mostlyclean, clean, distclean, realclean)
+	(extraclean): Don't act on man subdir if it doesn't exist.
+
+1994-05-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
+	Use them to set up CC.
+	(*-sun-sunos4.1.3): Set them.
+
+1994-05-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (lib-src): Don't depend on src/paths.h.
+
+1994-05-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* build-ins.in (copydests): Get rid of spurious `-'s.
+
+	* configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
+
+1994-05-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.23 released.
+
+	* configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
+	for the Xlib and Xt checks; then restore old CFLAGS.
+
+1994-05-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (HAVE_X11XTR6): Add newline before #if.
+	Add newline after #endif.
+
+1994-05-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (HAVE_X11XTR6): Arrange to define it.
+
+1994-05-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (install): Depend on blessmail.
+
+1994-05-12  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
+
+	* configure.in (mips-siemens-sysv*): Put quotes around value
+	containing blanks.
+
+1994-05-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (TAGS): Use the makefile in src subdir.
+
+1994-05-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in (opsys): Recognize `gnu'.
+
+1994-05-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (using NON_GNU_CPP): Fix test for CPP already set.
+
+1994-05-09  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
+
+	* configure.in: Remove AC_LANG_C call.  Not needed with Autoconf
+	 version > 1.8.
+
+1994-05-08  Morten Welinder  (terra@diku.dk)
+
+	* config.bat: Forcibly remove "# " style comments from makefiles.
+
+1994-05-08  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (uninstall): When processing lispdir and etcdir,
+	do nothing unless it exists and is a directory.
+
+1994-05-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (install-arch-indep): Do install info/dired-x*.
+	Merge code in from install-doc.
+	(install-doc): Merge code back into install-arch-indep.
+	(install-arch-dep): Don't depend on install-doc.
+
+	* configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
+
+1994-05-04  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (making src/Makefile and lib-src/Makefile):
+	Split off the autoconf substitutions and don't pass them thru cpp.
+	(undefs): Use $canonical as well as $configuration.
+
+	* make-dist: Distribute lisp/Makefile.
+
+	* configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
+	Use lower case names for the s files.
+
+1994-05-03  Morten Welinder  (terra@diku.dk)
+
+	* config.bat: Added possibility for different file name
+	transscriptions in lib-src.
+
+1994-05-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (lib-src): Undo previous change.
+	(blessmail): New target to run maybe-blessmail in lib-src.
+	(all): Depend on blessmail.
+
+	* Makefile.in (lib-src): Depend on src.
+
+1994-04-30  Paul Reilly  (pmr@churchy.gnu.ai.mit.edu)
+
+	* configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
+	(m88k-dg-dgux5.4R2): dgux5.4R2.
+
+1994-04-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (window_system): Restore accidentally deleted code
+	that uses AC_FIND_X.
+
+	* make-dist: Distribute config.bat.
+
+1994-04-29  Morten Welinder  (terra@diku.dk)
+
+	* config.bat: Corrected the configuration of lib-src
+	to keep up with configure.  Add note about dos version 3
+	or better needed (djgpp needs that).  Add note explaining
+	that either install in c:/emacs or edit the script.
+	Don't change to c:/emacs, but assume we're there (to minimize
+	the number of places to change).
+
+	* config.bat: Build-in the first step towards X11 support with
+	the X11 emulator that exists.  At this time it won't work,
+	and several files are missing.
+
+1994-04-28  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Use m/hp800.h in place of m/hp9000s800.h.
+	Don't look for -lresolv.
+
+	* Makefile.in (lib-src): Depend on src/paths.h.
+
+1994-04-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Restore deleted AC_SUBST of `configuration'.
+	Improve error message for bad --with-x-toolkit value.
+
+	* configure.in: Define CONFIGURATION in src/config.h
+	rather than substituting in src/Makefile.in.
+
+1994-04-26  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* Makefile.in (install-doc): New target.
+	(install-arch-dep): Depend on install-doc.
+	(mkdir): Create docdir.
+
+1994-04-22  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Test for libresolv.a.
+	Substitute machfile and opsysfile.
+
+1994-04-22  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
+	(install-arch-dep): Install under the name $(EMACS).
+
+1994-04-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (version): Use entire value of emacs-version.
+	(mips-siemens-sysv*): New alternative.
+
+1994-04-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (install-arch-indep): Don't install dired-x*.
+
+1994-04-18  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
+	Fix definition of $undefs.
+
+1994-04-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (window_system): Obey --with-x11=no and --with-x10=no.
+
+	* configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
+
+1994-04-16  David J. MacKenzie  (djm@nutrimat.gnu.ai.mit.edu)
+
+	* configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
+
+1994-04-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
+	and run it thru cpp, as with src/Makefile.in.
+
+	* configure.in: Use AC_SET_MAKE.
+
+1994-04-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
+
+1994-04-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
+
+	* configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
+	(printing the choices): Make the toolkit message unconditional.
+	(USE_X_TOOLKIT): Use `none', not `no', if none.
+	(include libsrc_libs): Include config.h, and specify -I for srcdir.
+	Get rid of temp file foofoo1.
+
+1994-04-13  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in (CFLAGS): Use shell syntax, not Makefile.
+
+1994-04-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
+	(printing the choices): State choice of toolkit.
+	(libsrc_libs): Recalculate after writing config.h;
+	then update lib-src/Makefile.
+
+1994-04-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Add sunos4shr as alternative for suns.
+	Conditionals testing for null $CC were backwards.
+
+1994-04-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist (msdos): Don't link patch1.  Link sed*.inp, not sed.in*.
+
+1994-04-09  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Handle -isc4.0*.
+
+1994-03-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (esix5): Set NON_GNU_CPP.
+
+1994-03-24  Roland McGrath  (roland@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (thisdir): Nonsensical variable removed.
+	(install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
+	back to $thisdir, rather than the directory `this_dir'.
+
+1994-03-17  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* Makefile.in (install-arch-indep): Add missing backslash after a
+	`then'.
+
+1994-03-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (thisdir): New variable.
+	(install-arch-indep): Go back to thisdir to run INSTALL_DATA.
+
+1994-03-08  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in: Add freebsd.
+
+1994-03-08  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in: Check for fpathconf.
+
+1994-03-02  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in (with_x_toolkit): Fix typo in previous change.
+
+1994-03-01  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in: New s-file for rs60000-ibm-aix3.2.5.
+
+1994-02-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (with_x_toolkit): Don't allow motif or open-look.
+
+1994-02-24  Karl Heuer  (kwzh@hal.gnu.ai.mit.edu)
+
+	* configure.in: Fix value of docdir.
+	* Makefile.in (install-arch-indep): Install DOC* in docdir.
+
+1994-02-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (*-sysv4.1): Set NON_GNU_CPP.
+
+1994-02-22  Karl Heuer  (kwzh@geech.gnu.ai.mit.edu)
+
+	* configure.in: New variable docdir to control where the docstring
+	file goes.
+	Makefile.in: Use it to initialize PATH_DOC in paths.h.
+
+1994-02-22  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
+
+	* configure.in: When --run-in-place, don't inherit archlibdir.
+
+1994-02-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (install-arch-dep, install-arch-indep):
+	New targets split up former do-install rule.
+	(do-install): Target deleted.
+
+1994-02-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (mips-sony-newsos*): New configuration.
+
+1994-02-14  Frederic Pierresteguy  (fp@mole.gnu.ai.mit.edu)
+
+	* configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
+
+1994-02-11  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
+
+	* configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
+
+1994-02-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Don't initialize CC.
+
+1994-02-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in (creating src/Makefile): Also generate -U switches
+	for symbols in the $configuration value.
+
+	* configure.in: Check for sys_siglist being declared in system header.
+
+1994-02-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (creating src/Makefile): Delete blank lines
+	along with lines of whitespace.
+	(m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
+
+1994-02-09  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Get, use, and substitute C_SWITCH_MACHINE
+	like C_SWITCH_SYSTEM.
+	(m68*-motorola-sysv*): Set CC.  Require cpu type to be m68k or m68000.
+
+1994-02-04  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
+
+	* configure.in (drem): Check for this function.
+
+1994-02-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
+	If CPP was inherited from environment, don't use NON_GNU_CPP.
+	(NON_GNU_CC): Likewise.
+	(handling with_gcc): Use explicit if in the `no' case.
+	(cc_specified): New variable; if set, don't use NON_GNU_CC.
+
+1994-02-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
+
+1994-02-01  Karl Heuer  (kwzh@mole.gnu.ai.mit.edu)
+
+	* configure.in: Check whether fmod exists.
+
+1994-01-31  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* make-dist: Distribute {src,lisp}/ChangeLog.? instead of
+	{src,lisp}/OChangeLog.
+
+1994-01-22  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in: Restore Jan 8 and Jan 16 changes.  The -U hack is
+	necessary for proper operation.  This code works with the current
+	released version of Autoconf.
+
+1994-01-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (with_x_toolkit): Treat values athena and lucid alike.
+	(USE_X_TOOLKIT): Define it for all values except `no'.
+
+	* configure.in: Undo first Jan 8 change and Jan 16 change.
+
+1994-01-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Handle --with-x-toolkit.  Produce lwlib/Makefile.
+	Substitute USE_X_TOOLKIT as both C macro and Make variable.
+
+	* Makefile.in (lwlib/Makefile): New target.
+	(SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
+	(clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
+	(unlock, relock): Handle lwlib subdir.
+
+	* Makefile.in: Add some .PHONY targets.
+
+	* make-dist: Handle lwlib subdir like oldXMenu subdir.
+
+	* lwlib: New subdirectory.
+
+1994-01-17  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: If CPP has a value that is a directory,
+	discard the value.
+
+1994-01-16  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in (srcdir_undefs): Add g flag to sed substitution to
+	remove -U[0-9]*.
+
+1994-01-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (do-install): Install the dired-x info files.
+
+	* configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
+	(See src/s/sol2.h.)
+
+1994-01-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
+
+1994-01-08  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in (creating src/Makefile): Put code inside 2nd arg to
+	AC_OUTPUT as it should be; hopefully noone will again see fit to
+	gratuitously break this and not make a change log entry.
+	Optimized sed processing of Makefile.in and cpp output; now
+	preserves comments previously removed from the cpp input.
+	Eliminated temp file for cpp output.  Generate -U switches to
+	undefine all identifiers that appear in the directory name
+	${srcdir}; pass these to cpp.
+
+	* configure.in (version): Fix sed regexp to match two-elt version
+	number.
+
+	* configure.in: Check for strerror.
+
+1994-01-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Test for bcmp.
+
+1994-01-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist (tempdir): Put subdir msdos into the distribution.
+
+1993-01-07  Morten Welinder  (terra@diku.dk)
+
+	* config.bat: New file.
+
+1994-01-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
+
+1994-01-01  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (m68*-next-*): Don't care about which os is specified.
+	(i[34]86-*-*): Check for *-nextstop*.
+
+1993-12-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Check for setsid.
+
+1993-12-17  Richard Stallman  (rms@srarc2)
+
+	* configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
+
+1993-12-15  Richard Stallman  (rms@srarc2)
+
+	* Makefile.in (mkdir): Make only the lockdir writable.
+
+	* configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
+
+1993-12-11  Richard Stallman  (rms@srarc2)
+
+	* Makefile.in (libdir): Use @libdir@.
+
+1993-12-08  Richard Stallman  (rms@srarc2)
+
+	* Makefile.in (install): Add empty command.
+
+1993-12-04  Richard Stallman  (rms@srarc2)
+
+	* make-dist: Put man/getopt.c in the dist.
+
+	* configure.in (LIBS): Add test for existence of XSetWMProtocols.
+
+	* Makefile.in (install): Depend on ${SUBDIR}, not `all'.
+
+1993-12-03  Richard Stallman  (rms@srarc2)
+
+	* configure.in (solaris): Set NON_GNU_CPP instead of CPP.
+	Set it for all solaris versions.
+	(mips-mips-riscos4*): Set NON_GNU_CC, not CC.
+	(after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
+	Likewise for NON_GNU_CC and CC.
+
+1993-12-01  Richard Stallman  (rms@srarc2)
+
+	* configure.in (mips-mips-riscos4*): Assign variable CC.
+	(checking ${with_gcc}): If "no", don't override CC if already set.
+	(CC): Initialize it as empty.
+
+1993-11-30  Richard Stallman  (rms at srarc2)
+
+	* configure.in (Suns): Set CPP if *-solaris2.3*.
+
+1993-11-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.22 released.
+
+	* Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
+
+1993-11-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: When breaking links, use cp -p.
+	Copy install.sh into distribution.
+	Move the temp dir up into the parent dir;
+	don't leave the staging dir make-dist.tmp... in existence.
+	* install.sh: New file.
+
+1993-11-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (i[34]86-ncr-sysv*): New specific alternative.
+
+1993-11-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (version): When --run-in-place, exclude
+	${datadir}/emacs/site-lisp from locallisppath.
+
+1993-11-18  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Delete jumk.c before writing it.
+
+1993-11-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.21 released.
+
+	* Makefile.in (mkdir): Ignore error from chmod.
+
+1993-11-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Don't put lisp/forms.README in the distribution.
+
+1993-11-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (creating src/Makefile): Before running cpp,
+	discard all lines that start with `# Generated' or /**/#.
+
+1993-11-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.20 released.
+
+	* make-dist: Use build-ins.in, not build-install.in.
+	Don't bother updating TAGS since it's not included.
+
+	* build-ins.in: Renamed from build-install.in.
+
+1993-11-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Don't try to link *.texinfo--there are none now.
+	When running make in lib-src, specify YACC var value.
+
+1993-10-03  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in (extrasub): Add vpath patterns for %.[yls].
+
+	* configure.in: Don't do seddery on config.status after AC_OUTPUT.
+	Instead just include the commands to make src/Makefile as the
+	second arg to AC_OUTPUT.
+
+	* configure.in: Use : instead of dnl for comment inside
+	$makefile_command.
+
+	* configure.in: No longer use vpath_sed.  Instead, when we notice
+	srcdir already configured, set extrasub to hack vpath in the
+	makefiles.
+
+	* configure.in: In cmds to make src/Makefile, chmod Makefile.new
+	before moving it.
+	* Makefile.in (VPATH): Define to @srcdir@.
+
+1993-09-28  Brian Fox  (bfox@cubit)
+
+	* configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
+	doesn't exist.  Just copy src/Makefile.in instead.  Touch
+	all of the Makefiles after editing config.status.
+
+	* INSTALL: Update documentation to match new configuration
+	mechanism.
+
+1993-09-27  Brian Fox  (bfox@ai.mit.edu)
+
+	* configure.in: Allow any of the path or directory Makefile
+	variables to be set with flags to configure.  Create all Makefiles
+	at configure time.  Edit special commands into config.status after
+	src/Makefile.in is built from src/Makefile.
+
+	* Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
+	  If these files are out of date, simply have config.status
+	  rebuild them; don't rebuild them explicitly.
+
+1993-09-25  Brian Fox  (bfox@ai.mit.edu)
+
+	* build-install.in: Change src/xemacs to src/emacs.  We no longer
+	create src/xemacs, so the file wouldn't be found.
+
+	* make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
+
+1993-09-24  Brian Fox  (bfox@albert.gnu.ai.mit.edu)
+
+	* configure.in: Avoid forcing the search of /usr/include before
+	fixed include files by resetting C_SWITCH_X_SITE if it is
+	"-I/usr/include".
+
+1993-09-20  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (@rip_paths@locallisppath):
+	Delete ${datadir}/emacs/site-lisp.
+
+1993-09-15  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in:
+	Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
+	Remove ${extra_output} from AC_OUTPUT call.
+
+1993-09-17  Brian Fox  (bfox@inferno)
+
+	* make-dist: Quote backquotes found in strings to be echoed.
+
+	* configure.in: Use "sh -c pwd" when we want to avoid having the
+	shell fix up the value of $PWD.
+
+1993-09-13  Brian Fox  (bfox@inferno)
+
+	* Makefile.in (do-install): Don't abort if ln or chmod at the end
+	of the installation fail.  Suggested by Karl Berry.
+
+1993-08-30  Brian Fox  (bfox@inferno)
+
+	* Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
+	was used.  Set MAKEFLAGS from MFLAGS.
+
+1993-09-16  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Test for res_init in libc.
+
+1993-09-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: In the file ${tempcname}, use configure___
+	instead of @configure@.
+
+1993-09-12  Roland McGrath  (roland@sugar-bombs.gnu.ai.mit.edu)
+
+	* make-dist: Dist vpath.sed
+
+	* Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
+	Depend on vpath.sed.
+	Replace sed comand for VPATH with @vpath_sed@.
+
+	* configure.in: Substitute variable `vpath_sed'.
+	If not in $srcdir and $srcdir is configured,
+	issue warning that GNU make is required,
+	and set vpath_sed to use vpath.sed script.
+
+1993-09-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in: Remove check for $srcdir being configured.  This
+	pretty much works now.
+	Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
+	Check for XFree86 (/usr/X386/include) independent of whether
+	-lXbsd exists.
+
+	* Makefile.in (info, dvi, clean, mostlyclean, distclean,
+	realclean, unlock, relock): Use `$(MAKE)' in place of plain
+	`make'.
+
+1993-08-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.19 released.
+
+	* configure.in (i386-*-sunos4): Assume Sunos 4.0.
+
+1993-08-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Check for XScreenNumberOfScreen.
+
+1993-08-12  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Add * to end of all configuration alternatives.
+	(m68*-sony-newsos3*): New alternative.
+
+1993-08-11  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Include getdate.c in distribution.
+
+	* configure.in: For --help, use $PAGER if it is set.
+	(LIB_X11_LIB): Default to -lX11.
+	(mips-sgi-irix5.*): New alternative.
+
+	* Makefile.in (do-install): Install info/gnus* and info/sc*.
+
+	* configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
+	Recognize *.B8.* as hpux version 8.
+	(m68*-tektronix-bsd*): Fix typo in tek4300.
+	(AC_HAVE_FUNCS): Add ftime.
+
+1993-08-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (m88k-tektronix-sysv3*): Added the missing *.
+	Use tekxd88, not tekXD88.
+
+1993-08-10  Roland McGrath  (roland@churchy.gnu.ai.mit.edu)
+
+	* configure.in: Check for -lm.  Then can check for frexp and logb.
+
+1993-08-08  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.18 released.
+
+	* make-dist (src): Don't put gnu-hp300 in dist.
+	(src, lisp): Include OChangeLog in dist.
+
+1993-08-08  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Test for presence of logb and frexp functions.
+
+1993-08-05  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (machine): Add i370-ibm-aix*.
+
+1993-08-03  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in (function checks): Test for mkdir and rmdir.
+
+	* configure.in (function checks): Don't test for random and bcopy
+	only when we're building with X; look for them all the time.
+
+1993-07-30  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Test for availability of bcopy functions, searching
+	the X libraries if we're using X.
+
+	* configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
+	and #define HAVE_AIX_SMT_EXP if we do.  This is present in some
+	versions of AIX, and needs to be passed to the loader.
+
+	* configure.in: Test for the availablility of the
+	XScreenResourceString function.
+
+1993-07-30  David J. MacKenzie  (djm@frob.eng.umd.edu)
+
+	* configure.in: If we found X on our own, set C_SWITCH_X_SITE and
+	LD_SWITCH_X_SITE and assume --with-x11.
+	Only look for X11 files if we weren't told about a window system
+	or if we were told to use X11 but not told where.
+	Search the libraries from the s and/or m files when checking for
+	functions.
+
+	* configure.in: Remove any trailing slashes in prefix and exec_prefix.
+
+1993-07-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Include lisp/dired.todo in the distribution.
+
+1993-07-23  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Add code to set HAVE_INET_SOCKETS.
+
+1993-07-21  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: If we do find x_includes and x_libraries
+	via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
+
+1993-07-19  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Include src/gnu-hp300 in the dist.
+
+	* configure.in (canonical): New variable holds the canonicalized
+	configuration.  Don't alter `configuration'.  Use `configuration'
+	for Makefile.in for file naming.
+	(testing x_includes and x_libraries): Use =, not ==.
+
+1993-07-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Version 19.17 released.
+
+	* Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
+	directory's makefile.  This allows the invocation of CPP which
+	builds xmakefile to receive these switches.  The SunSoft C
+	preprocessor inserts spaces between tokens if it doesn't get the
+	-Xs flag requested in src/s/sol2.h.
+
+1993-07-12  Frederic Pierresteguy  (F.Pierresteguy@frcl.bull.fr)
+
+	* configure.in (m68k-bull-sysv3): new config.
+
+1993-07-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Use the autoconf AC_FIND_X macro to try to find
+	the X Windows libraries.
+
+1993-07-07  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist (tempdir): Don't create lisp/forms-mode directory in
+	the distribution.  Those files aren't kept in their own
+	subdirectory any more.
+
+1993-07-06  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* Version 19.16 released.
+
+1993-06-23  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Add --verbose flag.
+
+1993-06-19  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* version 19.15 released.
+
+1993-06-18  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* Makefile.in (top_distclean): Use -f switch when cleaning out
+	lock dir; it might be empty.
+
+	* configure.in: Only check for -lXbsd once.
+
+1993-06-17  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Version 19.14 released.
+
+1993-06-17  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: If using gzip, create distribution with '.gz' extension.
+
+	* make-dist (lisp/term): This doesn't have a ChangeLog anymore.
+	(lisp/forms-mode): This doesn't exist anymore.
+
+	* configure.in: Look for the closedir function.
+
+1993-06-16  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in (CPP): Autoconf sets this to a shell variable
+	reference, which doesn't work when it's edited into a makefile.
+	Expand that variable reference.
+
+	* Makefile.in (CPP): New variable.
+	(src/Makefile): Edit CPP into src/Makefile.
+
+	* Makefile.in (src/Makefile): Don't bother exiting single quotes
+	and entering double quotes to get the values of LD_SWITCH_X_SITE
+	and the other make variables; make substitutes them in anyway.
+
+	* Makefile.in (uninstall): Don't remove the lisp and etc
+	directories if they're in the source tree.
+
+        Bring mumbleclean targets into conformance with GNU coding standards.
+	* Makefile.in (mostlyclean, clean): Separate these two; just have
+	them pass the request to the subdirectory makefiles.
+	(distclean): Pass the request down, and then get rid of the
+	files configure built, and get rid of the Makefiles.
+	(realclean): Pass the request down, and then do the same things
+	distclean does.
+	(uninstall, info, dvi): New targets.
+
+	* configure.in: Move clause for PC-compatible i386 box to the end
+	of the case statement, to avoid masking configurations below.
+
+	* configure.in: Add case for m88k-motorola-sysv4.
+
+	* configure.in: Add support for HP/UX versions 7, 8, and 9 on
+	the HP 68000 machines.
+
+	* configure.in: Put the arguments to LD_SWITCH_X_SITE's and
+	C_SWITCH_X_SITE's -L and -I switches in quotes, so the
+	preprocessor won't fiddle with them.
+
+1993-06-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (TAGS): cd to src to run etags.
+
+1993-06-12  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in (version): Check the X libraries for XrmSetDatabase
+	and random, and see if we have -lXbsd.
+
+1993-06-11  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Pass "-Isrc" to the CPP we run to examine the
+	s/*.h and m/*.h files.  Martin Tomes
+	<mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
+
+1993-06-10  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
+	above the general i386 alternative.
+
+1993-06-10  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Recognize configuration name for Data General
+	AViiON machines.
+
+	* configure.in: Use AC_LONG_FILE_NAMES.
+
+1993-06-09  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Test for bison.
+	* Makefile.in (YACC): New variable.
+	(lib-src/Makefile.in): Edit YACC into the makefile.
+
+1993-06-08  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Version 19.13 released.
+
+	* configure.in (CFLAGS): Don't set this according to the value of
+	the GCC shell variable.  Instead, consult the machine and system
+	files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
+	test __GNUC__ while we're at it.
+
+	* configure.in: Remove extra ;; from hpux cases.
+
+1993-06-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in: Check to see if the system has -ldnet.
+
+1993-06-08  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Add clauses to distribute lisp/forms-mode.
+
+1993-06-07  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in (machine): Fix the versions in hpux version number test.
+	Do not guess based on cpu type.  Do check for explicit system version.
+
+1993-06-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Do NOT look for `unknown' as company name.
+
+1993-06-02  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Fix typo in message.
+
+1993-06-01  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.12 released.
+
+	* Makefile.in (do-install): Correct previous etc-copying change.
+	Partially rewrite using `if'.
+	(src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
+
+	* Version 19.11 released.
+
+	* configure.in: Handle 386bsd.
+
+1993-05-31  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Update getdate.c.
+
+	* configure.in: Handle bsd386.
+
+	* Makefile.in (do-install): Use `-' in tar options.
+
+	* configure.in: Change  ! "${...}"  to  x"${...}" = x.
+
+	* Makefile.in (do-install): Copy the DOC-* files from the build
+	etc directory, as well as lots of things from ${srcdir}/etc.
+
+	* make-dist: Copy config.guess.
+
+	* configure.in: Handle AIX versions 1.2, 1.3.
+
+1993-05-30  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
+	the configuration name mips-mips-usg* to represent USG systems.
+
+	* configure.in: Fix logic to detect if srcdir is already configured.
+
+	* Makefile.in: Pass in LD_SWITCH_X_SITE.
+
+	* Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
+	foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
+	of a directory; cd might fail, and have pwd print out the current
+	directory.
+
+1993-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: When looking for sources, use '.', not `.`.  Also '..'.
+
+1993-05-30  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Complain if srcdir points at an already-configured
+	tree.
+
+1993-05-30  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Version 19.10 released.
+
+1993-05-29  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Makefile.in: Use Makefile comments, not C comments.
+
+	* configure.in: Add case for the Tektronix XD88.
+
+1993-05-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Handle sysv4.2 and sysvr4.2.
+
+1993-05-29  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Traverse the argument list without destroying it;
+	don't use shift.  It turns out that "set - ${saved_arguments}"
+	doesn't work portably.
+
+	* configure.in: Add missing "fi".
+
+	* make-dist: Rebuild configure if configure.in is newer.
+
+	* Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
+	targets to be executed even if make remembers that it has already
+	stisfied FRC.
+
+1993-05-29  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (do-install): Delete redundant code to copy etc twice.
+
+	* configure.in (romp): Handle various version numbers with aos and bsd.
+
+1993-05-28  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Fix message text.
+
+1993-05-28  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Make a `site-lisp' directory in the distribution,
+	instead of a `local-lisp' directory, which hasn't been the
+	appropriate name for a long time.
+	* Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
+	from the distribution first, then /usr/local/lib/emacs/site-lisp.
+
+	* Makefile.in (do-install): Correctly detect if ./etc and
+	${srcdir}/etc are the same.
+
+	* configure.in: Extract UNEXEC from the system configuration
+	files, compute the name of the source file corresponding to the
+	object file, and #define it as UNEXEC_SRC in config.h.
+
+	* configure.in: If srcdir is '.', then try using PWD to make it
+	absolute.
+
+	* configure.in: Include ${srcdir} in the printed report, to help
+	people notice if it's an automounter path.
+
+1993-05-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in (prefix): Don't run pwd on srcdir unnecessarily.
+
+1993-05-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (do-install): Delete the dest dir, not the source dir,
+	when they are different.  Add  `shift' command.
+	(COPYDESTS, COPYDIR): Delete external-lisp dir.
+	(externallispdir): Var deleted.
+
+	* configure.in: Delete spurious paren outputting short_usage.
+
+1993-05-27  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* Version 19.9 released.
+
+1993-05-26  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Makefile.in (${SUBDIR}): Pass the value of the make variable to
+	subdirectory makes.
+
+	* make-dist: Check for .elc files with no corresponding .el file.
+
+	* Makefile.in (mkdir): Make all the directories in locallisppath.
+
+	* config.guess: New file.
+	* configure.in: Use it, tentatively.
+	* INSTNALL: Mention its usage.
+
+	* configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
+	the former gives you the operating system rev directly.  Use
+	s/hpux.h if we don't recognize what we got.
+
+	* Makefile.in (do-install): Don't remove a destination directory
+	if it's the same as the source.  If ${srcdir}/info == ${infodir},
+	don't try to copy the info files.
+
+	* Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
+	doesn't work if you're not using a separate source directory.
+	(do-install): Copy the build tree's etc directory only after
+	making sure it's not also the source tree's etc directory.
+
+1993-05-26  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Handle sunos4.1.3 specially.
+
+1993-05-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (INSTALL): Add definition.
+
+	* configure.in: Fix some messages.  Support -with-gnu-cc.
+	At the end, use `set --', not `set -'.
+	Delete spurious `.h' in hpux alternatives.
+
+1993-05-25  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Version 19.8 released.
+
+1993-05-25  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: When looking for source in the same directory as
+	the configure script, make the path thus discovered absolute.
+	If the user specifies the `--srcdir' switch, make that directory
+	absolute too.
+
+	* Makefile.in (srcdir): Remove comment saying this doesn't work.
+
+	* Makefile.in (src/paths.h): Edit the `infodir' variable into this
+	too, as the value of the PATH_INFO macro.
+
+	* configure.in: Check to see if the source lives in the same
+	directory as the configure script.
+
+1993-05-24  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Makefile.in (install): Split this into `install' and
+	`do-install', to give people more control over exactly what gets
+	done.
+	(do-install): New target, containing the guts of `install'.  Don't
+	remove and recreate the directories inside the copying loop - do
+	it all before the copying loop.  Pass more flags to the lib-src
+	make.
+	(mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
+	avoid errors and warnings.
+
+	* configure.in: For generic IBM PC boxes, insist on "unknown" for
+	the manufacturer - the more general case was blocking other i386
+	configuration names below, and that's how the names are written in
+	MACHINES anyway.
+
+	* make-dist: When breaking links, remove the link before moving
+	the copy onto it, to avoid interactive behavior.
+
+	* Makefile.in: Doc fix.
+
+	* configure.in: Doc fix.
+
+	* INSTALL: Mention --exec-prefix option.
+
+	* configure.in: Add support for the `--exec-prefix' option.
+	* Makefile.in: Accept that support.
+
+	* configure.in: Use the AC_PROG_INSTALL macro.
+	* Makefile.in (INSTALL): Variable removed.
+	(INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
+
+	* configure.in: Distinguish between hp800's and hp700's by calling
+	"uname -m".
+
+1993-05-24  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+        * configure.in: Recognize configuration names for i860 boxes
+	running SYSV.
+
+1993-05-23  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Distinguish between hp800's and hp700's by the
+	version of HP/UX they run, since that's something people are more
+	likely to know - hp700's run 8.0.
+	Add HP 700 configuration.
+
+	* configure.in: Test for the presence of the `rename' function.
+
+	* Makefile.in (C_SWITCH_X_SITE): New variable - get this from
+	configure.in.
+	(oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
+
+	* make-dist: Break intra-tree links.
+
+	* configure.in: Explain that this is an autoconf script, and give
+	instructions for rebuilding configure from it.  Arrange to put
+	comments in configure explaining this too.
+
+	* configure.in: Make the first line of the configure script be
+	"#!/bin/sh".  Leaving the first line blank didn't work.
+
+	* configure.in (long_usage): Removed; made short_usage describe
+	the options briefly.
+
+	* configure.in: Implement the --prefix option.
+	* Makefile.in (prefix): Add support for it here.
+	* INSTALL: Document it here.
+
+	* Makefile.in (install): Don't assume that the files in the `info'
+	subdirectory match  *.info.  They don't have that prefix.
+
+1993-05-22  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Add case for version 5 of Esix.
+
+1993-05-22  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+        * Version 19.7 released.
+
+	* make-dist: There aren't any *.com files in lib-src anymore.
+
+	* make-dist: Copy texinfo.tex and texindex.c, rather than linking
+	them; they're symlinks to other filesystems on the GNU machines.
+
+	* make-dist: Check that the manual reflects the same version of
+	Emacs as stated in lisp/version.el.  Edit that version number into
+	the README file.
+
+1993-05-21  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Remove the hack of AC_DEFINE; use
+	AC_DEFINE_UNQUOTED.
+
+1993-05-20  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Don't distribute precomp.com, compile.com, or
+	link.com from ./src; they're in ./vms now.
+
+	Some time-handling patches from Paul Eggert:
+	* configure.in: Add AC_TIMEZONE.
+
+1993-05-19  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure.in: Recognize Linux as a valid operating system for
+	the i386.
+
+1993-05-18  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Distribute some VMS files we got from Richard Levitte.
+
+	* Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
+	the source for the sed command, not oldXMenu/Makefile.
+
+1993-05-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* INSTALL: Don't claim the srcdir option doesn't work.
+
+1993-05-16  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in: Include remarks saying what order the autoconf
+	tests should go in, and remind people to change config.h.in
+	whenever they add autoconf tests which make #definitions.
+
+	* make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
+
+1993-05-15  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* Makefile.in (oldXMenu/Makefile): Make this depend on
+	${srcdir}/oldXMenu/Makefile.in, not itself.
+
+	* PROBLEMS: Some updates from David J. Mackenzie.
+
+	More changes from David J. Mackenzie.
+	* Makefile.in (install.sysv, install.xenix, install.aix): Targets
+	removed; autoconf and config.h should specify all these
+	differences.
+	(buildlisppath): Make this path depend on ${srcdir}.
+	(INSTALLFLAGS): Removed.
+	(INSTALL): Include the -c flag.
+	(install): Change the way we invoke install accordingly.
+
+	Install ${srcdir} changes from DJM.
+	* Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
+	list.
+	(COPYDIR, COPYDESTS): Install files from both the etc directory in
+	the source tree and the etc directory in the object tree.
+	(${SUBDIR}): Pass the prefix variable down to submakes.
+	(everywhere): Use `sed', not `/bin/sed'.  Not all systems have sed
+	in /bin.
+	(lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
+	values for srcdir and VPATH.
+	(install): Add `v' flag to tar command.  Make sure that `dir'
+	exists in ${srcdir}/info before copying it.  Remember that the man
+	pages come from the source tree, not the object tree.
+	* configure.in: Remove remarks saying that the --srcdir option
+	doesn't work.
+	Create the etc directory in the object tree.
+	Recognize configuration names of the form *-sun-solaris*.
+	Recognize sunos5 and solaris as operating system names.
+
+	* configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
+	lib-src/getdate.y and src/systime.h.
+
+1993-05-15  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* make-dist: Make links in info subdir.
+
+1993-05-13  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in: Call AC_STDC_HEADERS.
+
+1993-05-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Sidestep autoconf's quoting of the second argument
+	of AC_DEFINE, so we can specify the value to put there.  It would
+	be nice if autoconf provided some way to specify computed values
+	for macros.
+
+1993-05-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
+	this is always just -DHAVE_CONFIG_H.
+
+	The GNU coding standards specify that CFLAGS should be left for
+	users to set.
+	* Makefile.in (CFLAGS): Let configure determine the default value
+	for this.  Don't
+	have it default to DEFS.
+	(${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
+	(lib-src/Makefile, src/Makefile): Edit the default value for
+	CFLAGS into these files, not DEFS.
+	* configure.in (CFLAGS): Choose a default value for this - "-g"
+	normally, or "-g -O" if we're using GCC.  Edit it into the
+	top-level Makefile.
+
+	* configure.in: When scanning the machine and system description
+	#include files, write their names to conftest.c properly.
+
+1993-05-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in: In configuration name case for Apallos running
+	Domainios, set opsys, not opsysfile.
+
+	* configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
+	src/config.h, instead of AC_OUTPUT; the latter overwrites
+	src/config.h even when it hasn't changed, puts a makefile-style
+	comment at the top even though it's C code, and produces a
+	config.status script which doesn't do the job right.
+
+	* configure.in: Add AC_LN_S test, so we can tell whether or not we
+	can use a symbolic link to get the X Menu library into src.
+	* Makefile.in (LN_S): New variable.
+	(src/Makefile): Edit the value of LN_S into this makefile.
+
+1993-05-06  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure.in: Support *-sco3.2v4* as opsystem.
+
+	* make-dist: Don't include calc directory.
+	Exclude many files in the man directory; copy a few.
+
+1993-05-04  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
+	call AC_STRUCT_TM to see what's in time.h.
+
+	* configure.in: Employ quoting stupidity to get the value of CPP
+	to expand properly.
+
+1993-04-27  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in: Use the AC_PROG_CPP macro, and then use the CPP
+	variable to scan the machine and system description files.
+
+	* configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
+	so that getdate.y builds correctly.
+
+1993-04-26  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure.in (tempcname): Change this to "conftest.c", so it will
+	work properly on systems with short filenames; this is the name
+	autoconf uses.
+
+	* configure.in: Also detect the availability of dup2 and
+	gethostname.
+
+	* configure.in: Use the AC_ALLOCA test.
+	* Makefile.in (ALLOCA): New variable, to be set by ./configure.
+	(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
+
+1993-04-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Distribute configure, as well as configure.in.
+	Oversight.
+
+1993-04-23  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (install): Print out the name of the directory we're
+	copying, so people can have some idea of whether we're making
+	progress.
+
+	* Makefile.in (install.aix, install.xenix, install.sysv, install):
+	Don't forget to re-create the COPYDESTS directories after we clear
+	them out.
+
+1993-04-13  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in: Add autoconf cookies so that the configure
+	script can comment out sections of path variable definitions to
+	choose between the installable configuration and the run-in-place
+	configuration.
+	* configure.in: Add new option `--run-in-place', to select the
+	run-in-place path definitions.
+
+	* configure.in: Add a clause to the big configuration name case
+	for the NeXT machine.
+
+1993-04-12  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (install, install.sysv, install.xenix, install.aix):
+	Make sure that each source directory exists, and is different from
+	the destination directory; then, delete the destination before
+	copying over the source.
+
+	* make-dist: Distribute configure.in, instead of configure.
+
+1993-04-10  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure.in: Don't set CC to "gcc -O" if the user specifies
+	`--with-gcc'.  Add -O to DEFS if GCC is set.
+
+1993-04-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (clean mostlyclean): Missing right paren.
+
+	* configure.in: When checking for X windows, search for an X11
+	subdirectory of ${x_includes}.
+
+	* configure.in: Check for gettimeofday function, for getdate.y.
+
+        Change `configure' to a mixture of custom code and autoconf stuff.
+	autoconf can't derive all the information we need, but we'd really
+	like to be able to take advantage of some of its tests, and its
+	file-editing facilities.
+	* configure.in: Renamed from configure.
+	Quote the sections of shell script we want copied literally to
+	the configure script.
+	(compile): Initialize this to make the autoconf macros' code happy.
+	Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
+	code to do their jobs.
+	Use autoconf to produce Makefile and src/config.h.
+	Remove the Makefile-style comment that autoconf places at the top
+	of src/config.h.
+	(config_h_opts): Removed - no longer necessary.
+	* Makefile.in (configname): Renamed to configuration.
+	(CONFIG_CFLAGS): Renamed to DEFS.
+	(CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
+	get values via autoload @cookies@.
+	(libsrc_libs): Get this from autoconf.  We used to do nothing
+	about this.
+	(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
+
+	* Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
+	echo the move-if-change command.
+
+1993-04-08  Jim Blandy  (jimb@churchy.gnu.ai.mit.edu)
+
+	* make-dist: Distribute lib-src/rcs-checkin.
+
+	* make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
+	Don't try to make links to the RCS or Old subdirectories.
+	Use the appropriate extension for the compression type in use.
+	Create the tar file in the shell's initial default directory, not
+	in ${tempparent}.
+	Erase the whole ${tempparent} tree, not just ${tempdir}.
+
+1993-03-30  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* Makefile.in (src/paths.h): Don't echo the huge sed command we
+	use to build paths.h.
+	(lib-src/Makefile, src/Makefile): Similarly.
+
+	* configure: Extend test for working `const' keyword to handle AIX
+	3.2 cc.
+
+1993-03-24  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Distribute lisp/term/ChangeLog.
+
+        Arrange for C compilation throughout the tree to get
+	C_SWITCH_SYSTEM from the configuration files.
+	* configure: Extract C_SWITCH_SYSTEM from the machine and
+	system-dependent files, and save it in the top-level Makefile.
+	* Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
+	(lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
+
+	* make-dist: Include the VMS support files in oldXMenu in the
+	distribution.
+
+	* configure: Doc fix.
+
+	* configure: Fix corrupted config_h_opts.
+
+	* configure: Properly report option names in error messages.
+
+	* configure: Properly recognize --x-includes and --x-libraries
+	options.
+
+	* configure: Fix syntax errors in code handling XFree386.
+
+1993-03-23  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* configure: Add special code to detect XFree386, and tell
+	config.h about it.
+
+	* configure: Properly handle extracting values of LIBS_MACHINE and
+	LIBS_SYSTEM that contain spaces.
+
+	* configure: Add `--x-includes' and `--x-libraries' options.  I
+	think these are dopey, but no less than three alpha testers, at
+	large sites, have said they have their X files installed in odd
+	places.  Implement them by setting C_SWITCH_X_SITE and
+	LD_SWITCH_X_SITE in src/config.h.
+
+1993-03-22  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
+
+	* make-dist: Don't distribute etc/Old files.
+
+	* GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
+	  backups.
+
+1993-03-20  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Fix typo.
+
+1993-03-19  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
+
+	* make-dist: Corrected typo, fixed it to discard = and TAGS files
+	in some cases where it should but didn't seen to.
+
+	* Makefile.in: Added unlock and relock productions.
+
+1993-03-18  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Add a --compress option to force make-dist to use
+	compress.
+
+	* make-dist: Use gzip, if we can find it.
+
+	* configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
+	make rs6000-ibm-aix default to -aix32.
+
+1993-03-17  Eric S. Raymond  (eric@geech.gnu.ai.mit.edu)
+
+	* Makefile.in: Added `Developer's configuration' section.
+
+1993-03-17  Eric S. Raymond  (eric@mole.gnu.ai.mit.edu)
+
+	* Makefile.in: Add commented-out variable settings for developer's
+	  configuration.
+
+1993-03-14  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Distribute `src/bitmaps' too.
+
+1993-03-14  Charles Hannum  (mycroft@hal.gnu.ai.mit.edu)
+
+	* configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
+	make rs6000-ibm-aix default to -aix32.
+
+1993-03-09  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
+
+	* Makefile.in (install.sysv): Add a second `$' in front of
+	`${dest}', so that the shell will expand it, instead of Make.
+
+	* configure: When processing the name of the configure script,
+	collapse `././' to `./', but leave a single `./' prefix alone.
+
+	* configure: Doc fix.
+
+1993-03-04  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* configure: Handle isc3.0 correctly.
+
+1993-02-25  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Don't try to copy the COPYING notice into
+	external-lisp; we're not distributing that directory any more.
+
+1993-02-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (install, install.aix, install.xenix, install.sysv):
+	Remove CVS subdirectories from the installed directory trees, as
+	well as RCS directories.
+
+1993-02-23  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Only copy gmalloc.c if we couldn't link it.
+	Don't try to copy man/{README,Makefile} unless they actually exist.
+
+	* Makefile.in (lisppath): Don't include externallispdir in this.
+	We're not sure whether we're even going to distribute the
+	directory yet.
+
+1993-02-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Don't distribute the external-lisp directory anymore.
+	* INSTALL: Remove all references to external-lisp.
+
+	* configure: Detect whether the compiler supports `const'
+	properly, and edit src/config.h accordingly.
+
+	* configure: Tweak layout of final report.
+
+	* Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
+	CFLAGS.
+
+	* Makefile.in (locallisppath): Make this default to
+	${datadir}/emacs/site-lisp, instead of
+	${datadir}/emacs/local-lisp.  ${datadir} and ${statedir} are often
+	the same thing, and local-lisp causes completion conflicts with
+	lock.
+	(lisppath): Add ${externallispdir} to this.
+	* INSTALL: Adjust installation directions.
+
+	* Makefile.in (externallispdir): New variable, to say where to
+	install the externally-maintained lisp files.
+	(COPYDIR, COPYDESTS): Copy the external lisp directory just like
+	the others.
+	* INSTALL: Describe external-lisp and the new externallispdir
+	variable.
+
+1993-02-14  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure (progname): New option `--with-gcc'.  Make it clearer
+	how we are trying to guess whether or not we have GCC.
+	* INSTALL: Document the `--with-gcc' option, and improve
+	description of `--with-x' options.
+
+1993-02-06  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
+	${infodir} from these variables; we have written out explicit code
+	to install the info files.
+
+1993-01-25  Jim Blandy  (jimb@geech.gnu.ai.mit.edu)
+
+	* make-dist: Don't distributed the RCS files in the etc directory.
+
+1993-01-24  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in: Some makes can't handle comments in the middle of
+	commands; move them to before the whole rule.
+
+1993-01-16  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* README: Mention what Emacs is.
+
+1993-01-14  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Include `./lisp/calc-2.02' in the distribution.
+	Add `./cpp' and `./man' back into the distribution.
+
+1993-01-13  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in: Define MAKE, and use where appropriate.
+
+1993-01-07  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Remember that the authoritative COPYING notice is
+	`etc/COPYING', not `../etc/COPYING'.
+
+1992-12-20  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Make sure that the COPYING notices in each directory
+	are copies, not symlinks.
+
+1992-12-19  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* INSTALL: The build process produces an executable called `emacs'
+	now.  Change references.
+	* Makefile.in: Adjust `install.mumble' targets to install
+	`src/emacs', not `src/xemacs'.
+
+	* configure: Start with a blank line; this keeps some old CSH's
+	from thinking it's a CSH script.  Most systems will just use
+	/bin/sh to run it, which is what we're expecting; the only other
+	shells which might try to interpret it themselves are probably
+	Bourne-compatible.
+
+1992-12-14  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* INSTALL: Improvements suggested by David Mackenzie.
+
+1992-12-12  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* Makefile.in (install, install.sysv, install.xenix, install.aix):
+	Don't try to copy the info files if there aren't any; the
+	unexpanded globbing pattern disappoints `install'.  Ignore the
+	return status of that command.
+
+	* INSTALL: Updated for new configuration arrangement.
+
+	* configure: Don't make the top-level Makefile read-only - people
+	may want to edit the values of the path variables.
+
+	* Makefile.in (install, install.sysv, install.xenix, install.aix):
+	Install the info files in ${infodir}.  Install the executable
+	under both `emacs' and `emacs-VERSION'.
+
+	* Makefile.in: Doc fix.
+
+	* Makefile.in (exec_prefix): New variable, as per latest version
+	of coding standards.
+	(bindir, libdir): Use it, instead of `prefix'.
+	(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
+
+	* Makefile.in (mandir): Make the default value for this depend on
+	$(prefix).
+
+	* Makefile.in (datadir, statedir, libdir): Make these all default
+	to ${prefix}/lib.
+	(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
+	to compensate.
+
+	* Makefile.in (install, install.sysv, install.xenix, install.aix):
+	Install the etags and ctags man pages too.
+
+	* Makefile.in (distclean): Don't delete backup files; that's the
+	job of extraclean.
+	(extraclean): Like distclean, but deletes backup and autosave files.
+
+1992-12-10  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	Make path specification conform to GNU coding standards.
+	* configure (long_usage): Remove all traces of old arguments from
+	usage messages, and document the options we do accept in more
+	detail: -with-x... and --srcdir.
+	(options, boolean_opts): Deleted; we don't have enough options to
+	make this worthwhile.
+	(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
+	along with the code which supported them; these should be set as
+	arguments to the top-level make.
+	(config_h_opts): Since this no longer doubles as a list of option
+	names, make them upper case; this simplifies the code which uses
+	them to build the sed command to edit src/config.h.  Change the
+	code which sets them.
+	(cc, g, O): Don't allow the user to set these using options; they
+	should be specified using `CC=' and `CFLAGS=' arguments to the
+	top-level make.  Just choose reasonable default values for them,
+	and edit them into Makefile.in's default CC and CONFIG_CFLAGS
+	values.
+	(gnu_malloc, rel_alloc): Don't allow the user to set these using
+	options; use them whenever the configuration files say they're
+	possible.
+	Simplify the argument processing loop.  Don't accept abbreviations
+	for option names; these might conflict with other configuration
+	options in the future.
+	Add some support for the `--srcdir' option.  Check for the sources
+	in . and .. if `--srcdir' is omitted.  If the directories we will
+	compile in don't exist yet, create them under the current directory.
+	Note that the rest of the build process doesn't really support
+	this.
+	Edit only the top Makefile.  That should edit the others.  Edit
+	into the makefile: `version', from lisp/version.el, `configname'
+	and `srcdir' from the configuration arguments, `CC' and
+	`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
+	the user's path, and LOADLIBES as gleaned from the system
+	description files.
+	Simplify the report generated; it doesn't need to include any
+	description of paths now.
+	Make `config.status' exec configure instead of just calling it, so
+	there's no harm in overwriting `config.status'.
+	* Makefile.in (version, configname): New variables, used to choose
+	the default values for datadir and libdir.
+	Path variables rearranged into two clearer groups:
+	- In the first group are the variables specified by the GNU coding
+	  standards (prefix, bindir, datadir, statedir, libdir, mandir,
+	  manext, infodir, and srcdir).
+	- In the second are the variables actually used for Emacs's paths
+	  (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
+	  archlibdir), which depend on the first category.
+	datadir and libdir default to directories under
+	${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
+	demand.
+	etcdir and lispdir default to subdirectories of datadir.
+	archlibdir defaults to libdir.
+	The new installation tree is a bit deeper than it used to be, so
+	use the new make-path program in lib-src to build them all.
+	Always build a new src/paths.h.tmp and then move-if-change it to
+	src/paths.h, to avoid unnecessary rebuilds while responding to the
+	right changes.
+	Remove all mention of arch-lib.  Run utility commands from
+	lib-src, and let the executables be copied into archlibdir when
+	Emacs is installed.
+	Add targets for src/Makefile, lib-src/Makefile, and
+	oldXMenu/Makefile, editing the values of the path variables into
+	them.
+	Let lib-src do its own installation.
+	(datadir): Default to putting data files under
+	${prefix}/lib/emacs/${version}, not /usr/local/emacs.
+	(emacsdir): Variable deleted; it would only be confusing to use.
+	(lispdir, etcdir): Default to ${datadir}/lisp.
+	(mkdir): Use make-path for this.
+	(lockdir): Do this in mkdir.
+	(Makefile): New target.
+
+	* configure (usage_message): Rename to long_usage.
+
+	* make-dist: Don't bother creating an arch-lib directory; that's
+	only for installation now.
+
+1992-11-20  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure: Use GCC-style configuration names, using config.sub.
+	Change the usage and help messages.
+
+	* configure: Initialize window_system, not indow_system.
+
+	* configure: Report which window system, compiler, and signal
+	handler return type we decide to use.
+
+	* make-dist: Explain what's going on if config.sub and gmalloc.c
+	can't be linked.  Place the code which copies them near the code
+	which links the rest of the files around them.
+
+1992-11-15  Jim Blandy  (jimb@apple-gunkies.gnu.ai.mit.edu)
+
+	* make-dist: Don't bother to distribute src/*.com, or
+	src/vmsbuild; those have all been moved to `../vms'.
+
+1992-11-07  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Don't forget that the way to avoid filenames starting
+	with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
+	`[a-zA-Z0-9].h'.  Add a new section for dealing with files that we
+	couldn't make hard links to, since we have two already, and
+	perhaps more to come.
+
+1992-11-04  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure: When editing parameters into lib-src/Makefile, change
+	the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
+	needs some other flags too.
+
+1992-11-03  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure: Remove spurious echo of the configuration name.
+
+	* make-dist: Don't distribute files in src/m and src/s whose names
+	begin with `='.
+
+1992-10-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure: Update GNU_MALLOC and REL_ALLOC in config.h.
+	Also LISP_FLOAT_TYPE.
+
+1992-10-26  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Copy config.sub, since it's a symbolic link to a file
+	on another file system.
+
+1992-10-17  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* make-dist: Include lib-src/makedoc.com and emacs.csh in the
+	distribution.
+
+	* config.sub: New file, to help us recognize configuration names.
+	* make-dist: Include it in the distribution.
+
+1992-09-14  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* configure: Convert `-' to `_' in specified option names.
+	Accept options with --.  Delete --highpri and --have-x-menu options.
+	New options --with-x and --with-x10 replace -window-system.
+	Don't mention options --gnu-malloc, --rel-alloc
+	or --lisp-float-type in help message.
+
+1992-09-13  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+        * make-dist: Include the `vms' subdirectory in the distribution.
+
+1992-09-10  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Remove lines starting with "# DIST: " when building
+	lib-src/Makefile and src/Makefile.  This allows us to mark the
+	"Makefile.in" files with explanatory comments which won't also get
+	stuck in the Makefiles.
+
+1992-09-05  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: Don't use the '+' operator in the sed regular
+	expression that extracts the version number from lisp/version.el;
+	Ultrix sed doesn't seem support the operator.  Just double the
+	operand and use *.
+
+1992-09-01  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile.in: Doc fix.
+
+1992-08-31  Jim Blandy  (jimb@totoro.cs.oberlin.edu)
+
+	* configure: Rewrite sed command to remove at most one ./ prefix;
+	Ultrix's sed doesn't allow us to apply the * operator to a \( \)
+	group.
+
+1992-08-25  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile.in (src/paths.h): Use sed, not /bin/sed.
+
+1992-08-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: Go ahead and build a new TAGS file, unless the
+	--newer option was specified.  Don't try to delete a TAGS file
+	from etc; it's not kept there, and shouldn't be deleted anyway.
+
+1992-08-14  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: If the lisp directory contains a default.el, don't
+	distribute it.
+
+	* configure: When searching signal.h for the type of a signal
+	return handler, make a copy of it, not a symbolic link to it; that
+	way, it will work on systems that don't have symbolic links.
+
+1992-08-14  Eric S. Raymond  (eric@mole.gnu.ai.mit.edu)
+
+	* make-dist: taught it about vcdiff and rcs2log, added --newer
+	option for generating incremental distributions.  Stopped it from
+	generating a TAGS file into the distribution; that sucker is
+	*big*, and easily enough generated with the toplevel makefile.
+
+1992-08-13  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: When writing config.status, don't prefix progname
+	with a '.'; it might be absolute.
+
+1992-08-05  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Choose to use X11 if either /usr/lib/libX11.a or
+	/usr/include/X11 exist, not only if both exist.
+
+1992-07-27  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Make the new external-lisp directory a duplicate of
+	the external-lisp directory, not the lisp directory.
+
+1992-07-07  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* Makefile.in (clean, mostlyclean): Don't bother trying to `make
+	clean' in arch-lib; it doesn't even have a Makefile.
+
+	* Makefile.in (clean, mostlyclean): In the test which tries to
+	distinguish between the build directory, which should be cleaned,
+	and the installed directory, which shouldn't, cd to `${emacsdir}',
+	not `${DESTDIR}${LIBDIR}'.
+
+1992-06-30  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: Be sure to delete the .c and .h files that YACC and
+	BISON create from getdate.y.
+
+        * external-lisp: New directory; see `external-lisp/README'.
+	* make-dist: Added support for the external-lisp subdirectory.
+
+	* make-dist: Changed message which complains that make-dist wasn't
+	invoked in the right directory to indicate which files it was
+	looking for.
+
+1992-06-29  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Add comments explaining why we can't translate
+	character ranges or control characters in `tr'.
+
+1992-06-24  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: When generating the configuration message, we used to
+	build the message from the start so that each line began with "# "
+	so that it would be a comment in `config.status'.  However, this
+	causes trouble if any of the variables we use in the message
+	expand to more than one line of text - as gnu_malloc_reason
+	sometimes does.  So instead, we build the message as it should be
+	printed to the user (i.e. without the "# " prefixes), and stick on
+	the "# "s when we write it to `config.status'.
+
+	* Makefile.in (clean, mostlyclean): Don't neglect to clean out
+	`lib-src' and `arch-lib'.
+
+	* configure: When generating report and `config.status' file, note
+	that bindir only determines where `make install' and
+	`build-install' will place the executables; this should make it
+	clear that the ordinary build process will not try to install
+	things.
+
+1992-06-10  Jim Blandy  (jimb@wookumz.gnu.ai.mit.edu)
+
+	* make-dist: Change messages to say that we are 'making links to
+	X', rather than 'copying X'.  And put `' quotes around file names.
+
+	* make-dist: Include '.tmp' in the name of the staging directory.
+
+	* make-dist: Pass the `-f' option to rm when you're not sure that
+	the files you're removing actually exist.
+
+	* make-dist: When setting up etc/COPYING, always nuke whatever is
+	there, and then copy it in, to make sure we get a real file.
+
+	* make-dist: Don't try to distribute *.defns files any more.  The
+	only such file was for simula.el, which has been superceded by a
+	version which doesn't have a separate .defns file.
+
+1992-05-28  Ken Raeburn  (Raeburn@Cygnus.COM)
+
+	* make-dist: Don't distribute configured versions of config.h.in,
+	paths.h.in, Makefile.in in src.
+
+	* configure: Delete .tmp files before creating them; don't bother
+	trying to make final targets writeable first, since it won't
+	matter to move-if-change.
+
+1992-05-19  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile.in (mkdir, lockdir): Don't put dashes in front of the
+	mkdir and chmod in the center of all the conditionals.  GNU Make
+	will strip these out, but other makes won't.
+
+1992-05-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: Include move-if-change in list of files to distribute.
+
+1992-05-04  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Remove any "." elements from the program name.
+
+	* configure: Don't record the values of all the possible arguments
+	in config.status; only record the options that the user specified.
+
+	* configure: Use move-if-change to move in the new src/config.h.
+
+1992-04-29  Ken Raeburn  (Raeburn@Cygnus.COM)
+
+        * move-if-change: New file, copied from gcc release.
+        * Makefile.in (src/paths.h): Use it, and put the "sed" output into
+        a temp file, so we don't update paths.h if an error occurs or if
+        it doesn't need changing.
+
+1992-04-28  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile.in (src/paths.h): Do not install a value for the
+	PATH_SUPERLOCK value; that macro doesn't exist anymore.
+	* build-install.in: Same thing.
+
+1992-04-24  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: Check the flag called "make_tar", not "make_dir"; the
+	latter, being a typo, is always false, resulting in a program
+	whose default behaviour is to painstakingly build a copy of the
+	source tree, and then delete it.  Rah.
+
+	* Makefile.in: Add dist target, and comment for it.
+
+	* configure: When scanning <signal.h> for a declaration for
+	signal, create a symbolic link with a name ending in .c, so the
+	compiler won't complain that it's only been given .h files.
+
+	* configure: Check whether there are any arguments available
+	before shifting to get the value of a non-boolean parameter.
+
+	* make-dist: Doc fix.
+
+1992-04-20  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Instead of grepping /usr/include/signal.h for a
+	signal declaration, run /usr/include/signal.h or
+	/usr/include/sys/signal.h through cpp and grep for the
+	declaration.
+
+	* configure: Redirect the output of grep to /dev/null instead of
+	using grep -s - that flag means different things on other systems.
+
+	* Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
+	since the former is recognizable even if you don't know what
+	'dumping' is.
+	* configure: Accomodate that change.
+
+	* configure: Accept options for all of the directories you can
+	change in the Makefile.
+
+	* configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
+
+	* INSTALL: Mention that you have to copy all the 'FOO.in' files to
+	FOO before you can use them.
+
+	* build-install.in: Made the "Where To Install Things" section
+	conform with the similar section from Makefile.in.  Copied section
+	which builds src/paths.h from src/paths.h.in from the Makefile.
+
+1992-04-19  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Write config.status to pass its command-line
+	arguments on to configure, so that people can use it to recreate
+	an old configuration, with minor changes.
+
+1992-04-16  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Don't rely on option variables being unset if their
+	values are the empty string.  In particular, when producing the
+	English report, don't assume that highpri will be unset when no
+	increased priority has been requested; -highpri='' should be the
+	same as omitting -highpri altogether.
+
+	* configure: Fix dumb bug: when running the system and machine
+	description files through cpp, mark those lines that we want to
+	evaluate with the string '@configure@', and then only evaluate
+	them.  This way if the files include anything that actually
+	generates text (type definitions or external declarations, say),
+	we won't try to eval it.
+
+1992-04-11  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* make-dist: New shell script.
+
+	* configure: When creating foo from foo.in, make foo read-only to
+	remind people to edit the .in file instead.
+
+	* INSTALL: Changed references to config.h-dist to config.h.in.
+	The "BUILDING GNU EMACS BY HAND" section neglected to mention how
+	to build src/paths.h from src/paths.h.in; added a paragraph to do
+	this.
+	* configure, Makefile, build-install: Changed filenames like
+	FOO-dist to FOO.in.
+
+1992-04-08  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile, build-install: Renamed to Makefile.in and
+	build-install.in; the configure script will edit these to produce
+	the usable Makefile and build-install.
+	* configure: Changed to produce ./Makefile, ./build-install,
+	lib-src/Makefile, and src/Makefile from their *.in counterparts,
+	instead of editing them in place.
+
+1992-04-07  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile: Re-arranged so that the undumped Emacs will search
+	../lisp *after* the site's local elisp files.
+	(locallisppath, dumplisppath): New variables.
+	(lisppath): This variable's default value is now chosen based on
+	$(locallisppath) and $(lispdir); while it used to be the
+	customization point for adding site-local elisp directories to
+	load-path, that job is now handled mostly by locallisppath.
+	(src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
+	Check the values being assigned to the *LOADSEARCH macros for null
+	path elements (like '::' in 'foo::bar').
+
+	* configure: When checking if the machine- and system-dependent
+	files define a particular macro or not, actually run them through
+	CPP and test the macros with #ifs, instead of just grepping for
+	the macros' names.  In particular, check for SYSTEM_MALLOC in this
+	way.
+
+1992-04-03  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+	* Makefile (install): Don't use -s in install.  (Keep the symbols.)
+
+1992-04-02  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* configure: Make the config.status file an executable shell
+	script which will recreate the same configuration.  Include the
+	verbal description of the current configuration as a comment in
+	the script.
+	* INSTALL: Doc fix.
+
+	* Makefile: brought the Makefile up to the GNU coding
+	standards, as described in standards.text:
+	(TAGS): New name for the target which rebuilds the tags table.
+	(check): New target; doesn't do anything yet.
+	(mostlyclean): New target, synonymous with clean.
+	(realclean): New target.  Currently, this just calls the
+	subdirectories's makefiles and then deletes config.status.
+	(INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
+	variables.
+	Installation directory variables changed to conform.
+	(install, install.sysv, install.xenix, install.aix): Changed the
+	code which copies the directories into their installed location to
+	allow the installed locations to be in several different
+	directories; the old version assumed that they would all be in
+	$(emacsdir).
+	(mkdir, lockdir): Allow the installed locations to be in several
+	different directories.
+	* INSTALL: Doc fix.
+
+	* build-install: Use the same variable names as the Makefile.
+	Allow the installed locations to be in several different
+	directories.
+
+1992-03-31  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* Makefile (src/paths.h): Instead of using a single sed command to
+	edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
+	separately, and don't forget to append "/!!!SuperLock!!!" to the
+	value of the PATH_SUPERLOCK macro.
+
+	* config.emacs: Renamed to configure, for consistency with other
+	GNU products.  Internal references changed.
+	INSTALL, Makefile: References changed.
+
+	* lock: New directory, which should always be empty.  If this
+	directory doesn't exist, Emacs won't complain; it just won't lock.
+	Having this here means that people can just unpack Emacs, build
+	it, and have locking work.
+
+	* share-lib: Re-renamed to etc, for the sake of tradition.
+	* config.emacs: Changed default value for datadir to ../etc.
+	* INSTALL, README: Adjusted.
+
+1992-03-18  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
+	by running CPP on the appropriate s/*.h and m/*.h files.
+
+1992-03-16  Jim Blandy  (jimb@pogo.cs.oberlin.edu)
+
+	* config.emacs: Make sure to set the "exit on error" flag once
+	we've removed config.status; errors should abort the configuration.
+
+1992-02-15  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
+
+	* config.emacs: Added -distribute option, so that the Makefile
+	paths are in their proper form.  I don't know why this matters.
+
+1992-02-14  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
+
+	* local-lisp: New directory, empty in the distribution, for people
+	to put local elisp code in.
+	* config.emacs: Include it in the default load path.
+	* README: Document it.
+
+1992-01-30  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
+
+	* config.emacs: Guess the type of signal handling functions based
+	on the contents of /usr/include/signal.h.
+
+	* config.emacs: Print out progress report messages.
+
+	* Makefile (src/paths.h): Don't generically replace
+	/usr/local/lib/emacs with LIBROOT.  This can hide bugs in the
+	editing of the other entries, and each entry should be dealt with
+	explicitly anyway.
+
+	* build-install: Converted from C-shell to Bourne shell.
+	* config.emacs: Edit build-install properly.
+
+	* config.emacs: Doc fix.
+
+1992-01-27  Richard Stallman  (rms@mole.gnu.ai.mit.edu)
+
+        * Makefile (install): Remove `B' from tar xf command.
+
+1992-01-13  Jim Blandy  (jimb at pogo.cs.oberlin.edu)
+
+	* config.emacs: Removed support for the `maintain-environment'
+	option; the only important difference between this and its absence
+	has been removed.
+	* INSTALL: Removed mention of `maintain-environment'.
+
+	* config.emacs: Fix arguments to sed when processing boolean
+	arguments.
+
+1991-12-05  Jim Blandy  (jimb at pogo.gnu.ai.mit.edu)
+
+	* config.emacs: New file, to help automate the installation
+        process.
+
+	* Makefile: Lots of changes to support the separation of etc into
+	architecture-dependent and -independent files:
+	(EMACSROOT): New variable, giving the directory under which all of
+	Emacs's libraries should be installed.  Changed rest of file to
+	use it.
+	(LIBDIR): Now denotes only architecture-dependent dir - relevant cha
+	(DATADIR): New variable, denoting architecture-independent dir.
+	(LOCKDIR): New variable, for completeness.
+	(SUBDIR): No more etc, new lib-src.
+	(COPYDIR): No more etc, new arch-lib and share-lib.
+	(src/paths.h): Set PATH_DATA and the LOCK macros too.
+	(src): Now depends on lib-src, not etc.
+	* build-install: Changes parallel to the above.
+	* README: Describe the new arrangement.
+
+	* vms: New subdirectory for all the VMS stuff.
+
+1991-12-03  Jim Blandy  (jimb at pogo.gnu.ai.mit.edu)
+
+	* Makefile (LISPPATH): New variable.
+	(src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
+
+1990-09-28  Richard Stallman  (rms at mole.ai.mit.edu)
+
+	* Makefile (install, install.sysv, install.xenix):
+	Install wakeup instead of loadst.  No need for setuid or setgid.
+
+1990-08-07  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
+
+	* Makefile (clean): Clean etc if that's not the installation dir.
+
+1990-04-26  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
+
+	* Makefile (paths.h): Make sed alter each name in the path.
+
+1988-08-30  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
+
+	* Makefile (install.sysv): Use cpio, not tar.
+
+1988-08-03  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
+
+	* Makefile (lockdir): Rename `lock' target.
+	Depend on it from install*, not from `all'.
+
+1988-05-16  Richard Stallman  (rms at frosted-flakes.ai.mit.edu)
+
+	* Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
+	to match build-install and paths.h.
diff --git a/README b/README
new file mode 100644
index 0000000000..ed1ef437c1
--- /dev/null
+++ b/README
@@ -0,0 +1,72 @@
+This directory tree holds version 20.0 of GNU Emacs, the extensible,
+customizable, self-documenting real-time display editor.
+
+You may encounter bugs in this release.  If you do, please report
+them; your bug reports are valuable contributions to the FSF, since
+they allow us to notice and fix problems on machines we don't have, or
+in code we don't use often.  See the file BUGS for more information on
+how to report bugs.
+
+See the files `etc/NEWS' and `etc/news.texi' for information on new
+features and other user-visible changes since the last version of
+Emacs.
+
+The file INSTALL in this directory says how to bring up GNU Emacs on
+Unix, once you have loaded the entire subtree of this directory.
+
+The file etc/PROBLEMS contains information on many common problems that
+occur in building, installing and running Emacs.
+
+Reports of bugs in Emacs should be sent to the mailing list
+bug-gnu-emacs@gnu.org.  See the "Bugs" section of the Emacs
+manual for more information on how to report bugs.  (The file `BUGS'
+in this directory explains how you can find and read that section
+using the Info files that come with Emacs.)  See `etc/MAILINGLISTS'
+for more information on mailing lists relating to GNU packages.
+
+The `etc' subdirectory contains several other files, named in
+capital letters, which you should look at when installing GNU Emacs.
+
+The file `configure' is a shell script to acclimate Emacs to the
+oddities of your processor and operating system.  It creates the file
+`Makefile' (a script for the `make' program), which automates the
+process of building and installing Emacs.  See INSTALL for more
+detailed information.
+
+The file `configure.in' is the input used by the autoconf program to
+construct the `configure' script.  Since Emacs has configuration
+requirements that autoconf can't meet, `configure.in' uses an unholy
+marriage of custom-baked configuration code and autoconf macros; it
+may be wise to avoid rebuilding `configure' from `configure.in' when
+possible.
+
+The file `Makefile.in' is a template used by `configure' to create
+`Makefile'.
+
+The file `make-dist' is a shell script to build a distribution tar
+file from the current Emacs tree, containing only those files
+appropriate for distribution.  If you make extensive changes to Emacs,
+this script will help you distribute your version to others.
+
+There are several subdirectories:
+
+`src' holds the C code for Emacs (the Emacs Lisp interpreter and its
+    primitives, the redisplay code, and some basic editing functions).
+`lisp' holds the Emacs Lisp code for Emacs (most everything else).
+`lib-src' holds the source code for some utility programs for use by
+    or with Emacs, like movemail and etags.
+`etc' holds miscellaneous architecture-independent data files
+    Emacs uses, like the tutorial text and the Zippy the Pinhead quote
+    database.  The contents of the `lisp', `info' and `man'
+    subdirectories are architecture-independent too.
+
+`info' holds the Info documentation tree for Emacs.
+`man' holds the source code for the Emacs manual.
+
+   Note that the Emacs Lisp manual sources are distributed separately.
+(They are twice as large as the Emacs manual in the man subdirectory.)
+
+`msdos' holds configuration files for compiling Emacs under MSDOG.
+`vms' holds instructions and useful files for running Emacs under VMS.
+`nt' holds various command files and documentation files that pertain
+    to running Emacs on Windows NT.
diff --git a/move-if-change b/move-if-change
new file mode 100755
index 0000000000..ee9e355e3e
--- /dev/null
+++ b/move-if-change
@@ -0,0 +1,15 @@
+#!/bin/sh
+if
+test -r $2
+then
+if
+cmp $1 $2 > /dev/null
+then
+echo $2 is unchanged
+rm -f $1
+else
+mv -f $1 $2
+fi
+else
+mv -f $1 $2
+fi
diff --git a/msdos/emacs.ico b/msdos/emacs.ico
new file mode 100644
index 0000000000..24d33a83ef
--- /dev/null
+++ b/msdos/emacs.ico
diff --git a/msdos/emacs.pif b/msdos/emacs.pif
new file mode 100644
index 0000000000..9de3aa6a1f
--- /dev/null
+++ b/msdos/emacs.pif
diff --git a/msdos/is_exec.c b/msdos/is_exec.c
new file mode 100644
index 0000000000..899c574af0
--- /dev/null
+++ b/msdos/is_exec.c
@@ -0,0 +1,222 @@
+/* Copyright (C) 1995 DJ Delorie, see COPYING.DJ for details */
+/* IS_EXEC.C
+ *
+ * Given a filename or a file handle, and the extension of the file,
+ * determine if the file is executable.
+ * First, the file extension is checked in case it uniquely identifies
+ * the file as either an executable or not.  Failing this, the first
+ * two bytes of the file are tested for known signatures of executable
+ * files.
+ *
+ * Copyright (c) 1994 Eli Zaretskii <eliz@is.elta.co.il>
+ *
+ * This software may be used freely so long as this copyright notice is
+ * left intact.  There is no warranty on this software.
+ *
+ */
+
+#include <libc/stubs.h>
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <dpmi.h>
+#include <go32.h>
+#include <io.h>
+#include <libc/farptrgs.h>
+#include <libc/dosio.h>
+
+extern unsigned short _djstat_flags;
+unsigned short        _get_magic(const char *, int);
+int                   _is_executable(const char *, int, const char *);
+
+/*
+ * Read a MAGIC NUMBER from a given file.  These are the first
+ * two bytes of the file, if we look at them as an unsigned short. */
+
+#define _STAT_EXEC_EXT      2   /* get execute bits from file extension? */
+#define _STAT_EXEC_MAGIC    4   /* get execute bits from magic signature? */
+
+unsigned short
+_get_magic(const char *s, int fh)
+{
+  __dpmi_regs          regs;
+  unsigned short       retval;
+  unsigned short       fpos_high = 0, fpos_low = 0;
+  int                  read_fail = 0;
+
+  /* If given a pathname, open the file. */
+  if (s)
+  {
+    int handle;
+    if((handle = _open(s,0)) == -1)
+      return 0;
+    regs.x.bx = handle;
+  }
+  /* Else file already open.  Remember its current file position
+     and move to beginning of file. */
+  else
+  {
+    regs.x.ax = 0x4201;		/* set pointer from current position */
+    regs.x.bx = fh;
+    regs.x.cx = regs.x.dx = 0;	/* move 0 bytes (i.e., stay put) */
+    __dpmi_int(0x21, &regs);
+    if (regs.x.flags & 1)
+    {
+      errno = __doserr_to_errno(regs.x.ax);
+      return 0;
+    }
+    fpos_high = regs.x.dx;	/* got current position */
+    fpos_low  = regs.x.ax;
+
+    regs.x.ax = 0x4200;		/* set pointer from the beginning of file */
+    regs.x.cx = regs.x.dx = 0;	/* move to beginning of file */
+    __dpmi_int(0x21, &regs);
+    if (regs.x.flags & 1)
+    {
+      errno = __doserr_to_errno(regs.x.ax);
+      return 0;
+    }
+  }
+  regs.x.ds = __tb_segment;
+  regs.x.dx = __tb_offset;
+
+  /* Read 2 bytes from the file. */
+  regs.x.ax = 0x3f00;
+  regs.x.cx = 2;
+  __dpmi_int(0x21, &regs);
+
+  /* We can either (1) succeed, (2) read less than 2 bytes,
+     or (3) fail to read at all.  */
+  if (regs.x.ax != 2)
+    read_fail = (regs.x.flags & 1) ? regs.x.ax : -1;
+
+  /* If called with filename, close the file. */
+  if (s)
+  {
+    regs.x.ax = 0x3e00;
+    __dpmi_int(0x21, &regs);
+    if (regs.x.flags & 1)
+      errno = __doserr_to_errno(regs.x.ax);
+  }
+  /* Else leave file pointer where we found it. */
+  else
+  {
+    regs.x.ax = 0x4200;		/* set pointer from the beginning of file */
+    regs.x.bx = fh;
+    regs.x.cx = fpos_high;
+    regs.x.dx = fpos_low;
+    __dpmi_int(0x21, &regs);
+    if (regs.x.flags & 1)
+    {
+      errno = __doserr_to_errno(regs.x.ax);
+      return 0;
+    }
+  }
+
+  if (read_fail == 0)
+    retval = _farpeekw(_dos_ds, __tb);
+  else
+  {
+    /* The file couldn't be read: assume non-executable.  If the file
+       *is* executable, but was passed as a file-handle, and the user
+       opened it in write-only mode, they lose...  */
+    retval = 0;
+    if (read_fail != -1)
+      errno = __doserr_to_errno(read_fail);
+  }
+
+  return retval;
+}
+
+/* A list of extensions which designate executable files.  These
+   are NOT tested for the magic number.  */
+static char executables[] = "|EXE|COM|BAT|BTM|DLL|VXD|";
+
+/* A list of extensions which belong to files known to NEVER be
+   executables.  These exist to minimize read()'ing files while
+   detecting executables by magic number.  You are welcome to
+   add to this list, but remember: only extensions which could
+   NEVER be present in executables should go here.  */
+static char non_executables[] = "\
+|A|A01|A02|A03|A04|A05|ADL|ARC|ARJ|ASC|ASM|AUX|AWK\
+|BAS|BIB|BGI|BMP\
+|C|CC|CFG|CGZ|CH3|CHR|CI|CLP|CMF|CPI|CPP|CXX\
+|DAT|DBF|DIZ|DOC|DVI\
+|E|EL|ELC\
+|F77|FN3\
+|GIF|GZ\
+|H|HLP|HPP|HXX\
+|ICO|IN|INC|INF|INI\
+|JPG\
+|L|LEX|LF|LIB|LOG|LST|LZH\
+|M|MAK|MAP|MF|MID|MPG\
+|O|OBJ\
+|PAK|PAS|PBM|PCD|PCX|PDS|PIC|PIF|PN3|PRJ|PS\
+|RAS|RGB|RLE\
+|S|SND|SY3\
+|TAR|TAZ|TEX|TGA|TGZ|TIF|TXH|TXI|TXT\
+|VOC\
+|WAV|WK1|WK3|WKB|WQ1|WQ3|WQ4|WQ5|WQ6|WQ!\
+|XBM\
+|Y\
+|ZIP|ZOO|";
+
+int
+_is_executable(const char *filename, int fhandle, const char *extension)
+{
+  if (!extension && filename)
+  {
+    const char *cp, *ep=0;
+    for (cp=filename; *cp; cp++)
+    {
+      if (*cp == '.')
+	ep = cp;
+      if (*cp == '/' || *cp == '\\' || *cp == ':')
+	ep = 0;
+    }
+    extension = ep;
+  }
+  if ((_djstat_flags & _STAT_EXEC_EXT) == 0
+      && extension
+      && *extension
+      && strlen(extension) <= ((extension[0]=='.') ? 4 : 3))
+    {
+      /* Search the list of extensions in executables[]. */
+      char tmp_buf[6], *tp = tmp_buf;
+
+      *tp++ = '|';
+      if (*extension == '.')
+	extension++;
+      while (*extension)
+	*tp++ = toupper (*extension++);
+      *tp++ = '|';
+      *tp = '\0';
+      if (strstr(non_executables, tmp_buf))
+        return 0;
+      else if (strstr(executables, tmp_buf))
+        return 1;
+    }
+
+  /* No extension, or extension doesn't define execute
+     bits unambiguously.  We are in for some dirty work.
+     Read the first two bytes of the file and see if they
+     are any of the known magic numbers which designate
+     executable files.
+     Unix-like shells, which have executable shell scripts
+     without extensions and DON'T have "#!" as their FIRST
+     TWO CHARACTERS, lose here.  Sorry, folks.  */
+  if ( (_djstat_flags & _STAT_EXEC_MAGIC) == 0 )
+    {
+      switch (_get_magic(filename, fhandle))
+        {
+          case 0x5a4d:      /* "MZ" */
+          case 0x010b:
+          case 0x014c:
+          case 0x2123:      /* "#!" */
+              return 1;
+        }
+    }
+
+  return 0;
+}
diff --git a/msdos/sigaction.c b/msdos/sigaction.c
new file mode 100644
index 0000000000..5b3ae79081
--- /dev/null
+++ b/msdos/sigaction.c
@@ -0,0 +1,38 @@
+/* Copyright (C) 1995 DJ Delorie, see COPYING.DJ for details */
+#include <signal.h>
+#include <errno.h>
+
+int
+sigaction(int _sig, const struct sigaction *_act, struct sigaction *_oact)
+{
+  int retval = 0;
+
+  if (_oact)
+  {
+    void (*installed_sig)(int) = signal (_sig, SIG_IGN);
+
+    /* FIXME */
+    if (installed_sig == SIG_ERR)
+    {
+      retval = -1;
+      errno = EINVAL;
+    }
+    else
+      signal (_sig, installed_sig);
+    _oact->sa_handler = installed_sig;
+    retval = sigemptyset (&_oact->sa_mask);
+    _oact->sa_flags = 0;
+  }
+  if (_act)
+  {
+    if (signal (_sig, _act->sa_handler) == SIG_ERR)
+    {
+      retval = -1;
+      errno = EINVAL;
+    }
+  }
+  return 0;
+}
+
+
+
diff --git a/nt/ChangeLog b/nt/ChangeLog
new file mode 100644
index 0000000000..f15c84d48d
--- /dev/null
+++ b/nt/ChangeLog
@@ -0,0 +1,512 @@
+1999-07-12  Richard Stallman  <rms@gnu.org>
+
+	* Version 20.4 released.
+
+1999-06-16  Andrew Innes  <andrewi@gnu.org>
+
+	* emacs.rc: Use an icon with a transparent background, to be in
+	keeping with other applications.
+
+1999-06-03  Andrew Innes  <andrewi@gnu.org>
+
+	* preprep.c: Fix typo.
+
+1999-05-02  Andrew Innes  <andrewi@gnu.org>
+
+	* config.h: Remove obsolete file.
+
+	* preprep.c (copy_executable_and_move_sections): Ifdef out a
+	couple of unused switch cases that aren't defined on all
+	platforms.
+
+	* ftime.bat: Add another variation of the profile command, which
+	only profiles extended commands.
+
+1999-03-31  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* cmdproxy.c (main): Fix parens.
+
+1999-03-25  Andrew Innes  <andrewi@gnu.org>
+
+	* cmdproxy.c (main): Call GetShortPathName to normalize program
+	names for comparison.
+
+1999-03-05  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.def: Compile multiple .c files when possible.
+	Use BLD instead of assuming i386.
+	* makefile.nt: Remove common multiple file compilation commands.
+
+1999-03-04  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* cmdproxy.c (main): Add missing parens.
+
+1999-02-20  Andrew Innes  <andrewi@gnu.org>
+
+	* preprep.c: New program to allow dumped image to be profiled.
+
+	* makefile.nt (preprep): New target.
+	(ALL): Build it.
+
+	* makefile.def (ARCH_CFLAGS): Set struct packing to 8.
+
+	* ftime.bat: Invoke preprep to prepare dumped image for profiling.
+	Change prep options to profile libc functions and skip the startup
+	code.
+
+1999-02-15  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.nt: Create installation directory as first step.
+
+1999-01-31  Andrew Innes  <andrewi@gnu.org>
+
+	* addsection.c: (ROUND_UP_DST_AND_ZERO): Renamed from
+	ROUND_UP_DST.  Zeroes the alignment slop.
+	(copy_executable_and_add_section): Update the
+	SizeOfHeaders field properly.
+
+1999-01-27  Andrew Innes  <andrewi@gnu.org>
+
+	* makefile.nt: Do make version comparison as strings.
+
+1999-01-26  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* runemacs.c (WinMain): Pass explicit environment block to
+	CreateProcess, to work around a bug in Windows 95/98.
+
+1999-01-22  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* icons: New directory with Davenport's icons.
+	icons/sink.ico: Renamed from emacs.ico.
+
+	* makefile.nt (install, fast_install): Install Windows icons
+	into etc/icons.
+
+	* emacs.rc (ICON): Use icons/gnu2a32.ico as the default icon.
+
+1999-01-17  Andrew Innes  <andrewi@gnu.org>
+
+	* makefile.nt: (ALL): List top-level targets.
+	(addsection): New top-level target.
+	(install): Copy fns-*.el to bin directory.
+
+	* addsection.c: New program to add static heap section to
+	temacs.exe after linking, in support of new unexec method.
+
+1998-12-28  Andrew Innes  <andrewi@delysid.gnu.org>
+
+	* cmdproxy.c (spawn): Pass directory for child as parameter.
+	(main): Save startup directory to give to spawn, then change
+	directory to location of .exe in order not to prevent startup
+	directory from being deleted.
+
+1998-12-08  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.nt: Do string comparision of _NMAKE_VER.
+
+1998-12-02  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* config.nt (LOCALTIME_CACHE): Define.
+
+1998-11-13  Andrew Innes  <andrewi@delysid.gnu.org>
+
+	* install.bat: Convert to DOS format.
+
+1998-11-10  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* cmdproxy.c (main): Set environment size only when running
+	command.com.
+
+1998-11-03  Theodore Jump <tjump@tertius.com>
+
+	* makefile.def (SYS_LDFLAGS): Use swapfile when running from cd or net.
+	(DEL_TREE): Use rd instead of rmdir.
+	(ARCH_CFLAGS): Optimize for P6.  Align structures on 8-byte boundaries.
+	* makefile.nt: Compile multiple source files when possible.
+	
+1998-10-05  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* cmdproxy.c (main): Treat command line options as case-insensitive.
+
+1998-08-19  Richard Stallman  <rms@psilocin.ai.mit.edu>
+
+	* Version 20.3 released.
+
+1998-07-20  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* addpm.c (main): Explicitly check result of message box for OK.
+
+1998-06-05  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* inc/sys/file.h (D_OK): Define new macro.
+
+1998-06-01  Andrew Innes  <andrewi@mescaline.gnu.org>
+
+	* makefile.def (CFLAGS): Do not define HAVE_NTGUI.
+
+1998-05-30  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* emacs.rc (VS_VERSION_INFO): Define.
+
+1998-04-23  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.nt (emacs.bat, debug.bat): Create them in the
+	installation directory.
+
+1998-04-23  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* ddeclient.c: New file.  (Support program for performing limited
+ 	interprocess communication on Windows.)
+
+	* makefile.nt: Build ddeclient.
+
+	* cmdproxy.c (main): Only set environment size for real shell, and
+ 	provide extra directory argument, when running on Windows 95.
+	
+1998-04-17  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* cmdproxy.c (fail): Exit with a negative return value.
+	(spawn): Return subprocess return code as an argument.
+	Explicitly copy environment block.
+	(main): Update to use return value argument with spawn.
+	Retry if spawn failed when a subshell was not tried.
+
+	* config.nt: Include new macros from src/config.in.
+	(GNU_MALLOC, REL_ALLOC): Define.
+	(RE_TRANSLATE_TYPE): Use Lisp_Object as type.
+	(RE_TRANSLATE): Use char_table_translate.
+
+	* makefile.def (CP_DIR): Preserve attributes.
+
+	* makefile.nt (clean): Delete patch generated files, optimized
+	build directory.
+
+1997-10-01  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* addpm.c (env_vars): Fix misplaced % in SHELL entry.
+
+1997-09-19  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 20.2 released.
+
+1997-09-15  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 20.1 released.
+
+1997-09-11  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* debug.bat.in: New file.
+	* makefile.nt (debug.bat): New target.
+
+1997-09-02  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* addpm.c (env_vars): Put site-lisp before lisp in EMACSLOADPATH.
+	Quote group name.  Allow different icons to be specified.
+
+	* cmdproxy.c (get_env_size): New function.
+	(spawn): Explicitly pass in environment when creating subprocess.
+	(main): Cleaup error messages.
+	Specify dynamically sized environment block for real shell.
+	Pass on unhandled switches to real shell.
+	Quote program name.
+
+	* makefile.def (CFLAGS_COMMON): Place pdb file in object build 
+	directory.
+	(CFLAGS) [!MSVCNT11]: Define _CRTAPI1.	
+
+	* runemacs.c (WinMain): Allow Emacs process to be started with
+ 	high or low priority.
+
+	* emacs.bat.in: Remove OS dependent operations.
+	
+1997-09-02  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* addpm.c (env_vars): No longer set INFOPATH.
+
+	* cmdproxy.c (get_next_token): Null terminate token returned.
+
+	* emacs.bat.in (INFOPATH): No longer set INFOPATH.
+
+1997-08-10  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* addpm.c (env_vars): Set SHELL to cmdproxy.
+	(main): Initialize idDde to 0.
+	Determine emacs_path from module file name.
+	Prompt for install.
+
+	* makefile.def (MSVCNT11): Conditionally define it.
+	(BASE_LIBS): Do not use oldnames.lib.
+	(SYS_LDFLAGS): Use pdb files.
+	(CFLAGS_COMMON) [!spd]: Define EMACSDEBUG.
+	(ARCH_CFLAGS) [i386 && spd]: Use space optimizations.
+	(ARCH_CFLAGS) [alpha && spd]: Use optimizations.
+
+	* makefile.nt (ALL): Build cmdproxy.
+	(cmdproxy): New target.
+	(install): Install cmdproxy.
+
+	* ftime.bat, debug.bat, cmdproxy.c: New files.
+
+1997-07-10  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* inc/sys/socket.h: (shutdown): Define.
+	(sys_shutdown): Export.
+
+1997-07-08  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* config.nt (RE_TRANSLATE): Copy definition from config.in.
+
+1997-07-01  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* config.nt: Update file comments.
+	Update undefs added/removed in src/config.in.
+
+1997-06-19  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefil.def, emacs.bat: Use windows95 and windowsnt instead
+	of win95 and winnt, respectively.
+
+1997-01-04  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.nt (real_install): Create site-lisp in installation dir.
+	* addpm.c (env_vars): Add site-lisp to EMACSLOADPATH.
+	* emacs.bat.in: Add site-lisp to EMACSLOADPATH.
+
+1996-08-11  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 19.33 released.
+
+1996-08-09  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* runemacs.c (WinMain): Put a space between the binary and its args.
+
+1996-07-31  Richard Stallman  <rms@psilocin.gnu.ai.mit.edu>
+
+	* Version 19.32 released.
+
+1996-07-16  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* makefile.nt (clean): Use OBJDIR macro.
+
+1996-06-03  Kim F. Storm  <kfs@olicom.dk>
+
+        * runemacs.c (CHOOSE_NEWEST_EXE): New parameter macro.
+	Not defined by default.
+	(WinMain): Add conditional testing CHOOSE_NEWEST_EXE.
+	(WinMain): Convert backslashes to slashes in env var values.
+
+        * addpm.c (env_vars): Use slashes, not backslashes.
+
+1996-05-25  Karl Heuer  <kwzh@gnu.ai.mit.edu>
+
+	* Version 19.31 released.
+
+1996-05-13  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* install.bat: Set BUILD_TYPE and INSTALL_DIR before calling make;
+	undo settings afterwards.
+
+1996-05-08  Andrew Innes  <andrewi@harlequin.co.uk>
+
+	* addpm.c (env_vars): Set SHELL registry entry to value of COMSPEC
+ 	environment variable.
+
+1996-05-03  Andrew Innes <andrewi@harlequin.co.uk>
+
+	* install.bat: Allow for optimized build.
+	* makefile.def [BUILD_TYPE]: Build optimized version in its own dir.
+	(ARCH_CFLAGS) [BUILD_TYPE == spd]: Build optimized version.
+
+1996-05-03  Andrew Innes <andrewi@harlequin.co.uk>
+
+	* addpm.c (REG_ROOT): Don't use a trailing backslash.
+	(env_vars): Rename field emacs_path to emacs_dir.
+	(main): Add link to runemacs instead of emacs.
+
+	* install.bat: Check if INSTALL_DIR is passed as an argument.
+
+	* makefile.def (CONFIG_H) [WIN95]: Use config.nt.
+
+	* makefile.nt: Build and install runemacs.exe.
+
+	* runemacs.c: New file.
+
+	* config.w95: File removed.
+
+	* inc/netdb.h, inc/unistd.h, inc/arpa/inet.h, inc/netinet/in.h,
+	inc/sys/socket.h, inc/sys/time.h: New header files.
+
+	* inc/sys/file.h (F_OK, X_OK, W_OK, R_OK): New macros.
+	
+1996-03-27  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.def (DEL): Defined.
+	(DEL_TREE) [win95]: Defined.
+	(SYS_LDFLAGS): Set executable versions to 3.10.
+	
+	* makefile.nt: Change uses of del to $(DEL).
+
+1996-01-17  Erik Naggum  <erik@naggum.no>
+
+	* All files: Update FSF's address in comment preamble.
+
+1996-01-03  George V. Reilly  <georger@microcrafts.com>
+
+	* emacs.ico: Now the proverbial kitchen sink icon.
+
+1995-11-24  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.30 released.
+
+1995-11-22  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.def (CP_DIR): Use platform independent switches for xcopy.
+
+	* makefile.nt (install, fast_install, real_install, clean):
+	Don't use switches to del not supported by Win95.
+
+1995-11-07  Kevin Gallo  <kgallo@microsoft.com>
+
+	* makefile.nt (addpm.exe): Link with $(ADVAPI32).
+	(install, fast_install): Change same-dir test to create test file in
+	installation tree and thereby support read-only shares.
+	(clean): Remove .pdb files.
+
+	* makefile.def (NTGUI): New macro.
+	[NTGUI] (CFLAGS): Define HAVE_NTGUI.
+
+	* config.nt, config.w95: Update to latest src/config.in.
+
+	* addpm.c (env_vars): New variable.
+	(add_registry): New procedure.
+	(main): Use values of configuration environment variables from
+	the registry if defined, the process environment otherwise.
+
+1995-06-19  Richard Stallman  <rms@mole.gnu.ai.mit.edu>
+
+	* Version 19.29 released.
+
+	* makefile.nt (addpm.exe): Change WinMainCRTStartup to mainCRTStartup.
+
+1995-06-13  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.nt: Define .c to .obj suffix rule.
+	(addpm.obj): Compile directly, use CFLAGS.
+	(addpm.exe): Link from addpm.obj.
+	
+	* makefile.def (MSVCNT11): Defined.
+	(BASE_LIBS) [MSVCNT11]: Use oldnames.lib.
+	(CFLAGS_COMMON): Defined.
+	(CFLAGS) [MSVCNT11]: Define _CRTAPI1 to _cdecl.
+	
+1995-06-09  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* emacs.bat.in: Renamed from emacs.bat
+	(emacs_dir): Renamed from emacs_path
+	Definition removed.
+
+	* addpm.c: New file.
+	* makefile.nt (ALL,addpm,addpm.exe,addpm.obj): Defined.
+	(all): Depend upon $(BLD) and $(ALL).
+	(install): Depend upon emacs.bat.
+	Create program item for Emacs.
+	(clean): Delete obj.
+	(emacs.bat): Defined.
+	* makefile.def (EMACS_ICON_PATH,ADDPM): Defined.
+
+1995-05-27  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* ebuild.bat, emacs.bat, fast-install.bat, install.bat:
+	Add carriage returns; necessary for batch files on Win95.
+
+1995-05-25  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* config.w95: Created.
+	* config.h: Changed to config.nt.
+	
+	* makefile.nt (SUBDIRS): Commented out.
+	(all,install,clean): Expand for-loops.
+	(BUILD_CMD,INSTALL_CMD,CLEAN_CMD): Defined.
+
+	* makefile.def (SYS_LIB_DIR,SYS_INC_DIR): Undefined.
+	(ARCH): New definition.
+	(CPU,CONFIG_H,OS_TYPE): Defined.
+	(INCLUDE,LIB): Checked if valid.
+	(ntwin32.mak): Included.
+	(AR,CC,LINK): New definition.
+	(ADVAPI32,libc,BASE_LIBS): Defined.
+	(SYS_LDFLAGS): New definition.
+	Update comments and preprocessor conditionals.
+
+	* emacs.bat (SHELL): Conditionally defined.
+	(HOME): Conditionally defined.
+	(emacs_path,HOME): Update comments.
+	Turn off all echo.
+
+1995-05-09  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* _emacs, config.h, ebuild.bat, emacs.bat, emacs.rc,
+	fast-install.bat, install.bat, makefile.def, makefile.nt, paths.h,
+	inc/pwd.h, inc/sys/dir.h, inc/sys/file.h, inc/sys/ioctl.h,
+	inc/sys/param.h: Removed carriage-returns.
+
+1995-05-06  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.def (CVTRES): Defined.
+
+	* emacs.ico, emacs.rc: New files by Kevin Gallo.
+
+1995-04-10  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* src: Removed.
+
+	* src\config.h, src\paths.h: Moved to parent dir, src removed.
+
+1995-04-09  Geoff Voelker  <voelker@cs.washington.edu>
+
+	* makefile.def (INSTALL_DIR): Changed to generic directory.
+
+	* emacs.bat: Added arguments when emacs.exe invoked.
+
+	* ebuild.cmd, emacs.cmd, install.cmd: Changed extension to .bat.
+
+1994-12-13  voelker  <voelker@cs.washington.edu>
+
+	* makefile.def (CC): In configuration section.
+	(COMPAT_LIB): Defined.
+
+1994-11-01  voelker  <voelker@cs.washington.edu>
+
+	* src/paths.h: New file.
+
+	* src/config.h: New file.
+
+	* inc/pwd.h: New file.
+
+	* inc/sys/dir.h: New file.
+
+	* inc/sys/file.h: New file.
+
+	* inc/sys/ioctl.h: New file.
+
+	* inc/sys/param.h: New file.
+
+	* todo: New file.
+
+	* readme: New file.
+
+	* makefile.nt: New file.
+
+        * makefile.def: New file.
+ 
+        * install.cmd: New file.
+
+        * install: New file.
+
+        * fast-install.cmd: New file.
+
+	* emacs.cmd: New file.
+
+	* ebuild.cmd: New file.
+
+	* _emacs: New file.
diff --git a/nt/INSTALL b/nt/INSTALL
new file mode 100644
index 0000000000..d21fd0c12b
--- /dev/null
+++ b/nt/INSTALL
@@ -0,0 +1,165 @@
+		      Building and Installing Emacs
+		      on Windows NT and Windows 95
+
+You need a compiler package to build and install Emacs on NT or Win95.
+If you don't have one, precompiled versions are available in
+ftp://ftp.cs.washington.edu/pub/ntemacs/<version>.
+
+Configuring:
+
+(1) In previous versions, you needed to edit makefile.def
+    to reflect the compiler package that you are using.  You should no
+    longer have to do this if you have defined the INCLUDE and LIB 
+    environment variables, as is customary for use with Windows compilers.
+    (Unless you are using MSVCNT 1.1, in which case you will need
+    to set MSVCNT11 to be a non-zero value at the top of makefile.def.)
+
+(2) Choose the directory into which Emacs will be installed, and
+    edit makefile.def to define INSTALL_DIR to be this directory.  
+    (Alternatively, if you have INSTALL_DIR set as an environment
+    variable, the build process will ignore the value in makefile.def
+    and use the value of the environment variable instead.)  Note 
+    that if it is not installed in the directory in which it is built,
+    the ~16 MB of lisp files will be copied into the installation directory.
+
+    Also, makefile.def is sometimes unpacked read-only; use
+   
+    > attrib -r makefile.def
+
+    to make it writable.
+
+(3) You may need to edit nt/paths.h to specify some other device
+    instead of `C:'.
+
+Building:
+
+(4) The target to compile the sources is "all", and is recursive starting 
+    one directory up.  The makefiles for the NT port are in files named 
+    "makefile.nt".  To get things started, type in this directory:
+
+    > nmake -f makefile.nt all
+
+    or use the ebuild.bat file.
+
+    When the files are compiled, you will see some warning messages declaring
+    that some functions don't return a value, or that some data conversions
+    will be lossy, etc.  You can safely ignore these messages.  The warnings
+    may be fixed in the main FSF source at some point, but until then we
+    will just live with them.
+
+    NOTE: You should not have to edit src\paths.h to get Emacs to run
+    correctly.  All of the variables in src\paths.h are configured
+    during start up using the nt\emacs.bat file (which gets installed 
+    as bin\emacs.bat -- see below).
+
+Installing:
+
+(5) Currently, Emacs requires a number of environment variables to be set
+    for it to run correctly.  A batch file, emacs.bat, is provided that 
+    sets these variables appropriately and then runs the executable
+    (emacs.bat is generated using the definition of INSTALL_DIR in
+    nt\makefile.def and the contents of nt\emacs.bat.in).
+
+(6) The install process will install the files necessary to run Emacs in 
+    INSTALL_DIR (which may be the directory in which it was built), 
+    and create a program manager/folder icon in a folder called GNU Emacs.
+    From this directory, type:
+
+    > nmake -f makefile.nt install
+
+    or use the install.bat file.
+
+(7) Create the Emacs startup file.  This file can be named either .emacs,
+    as on Unix, or _emacs.  Note that Emacs requires the environment 
+    variable HOME to be set in order for it to locate the startup file.  
+    HOME could be set, for example, in the System panel of the Control
+    Panel on NT, or in autoexec.bat on Win95.
+
+(8) Start up Emacs.
+
+    The installation process should have run the addpm.exe program, which
+    does two things.  First, it will create a set of registry keys that
+    tell Emacs where to find its support files (lisp, info, etc.).
+    Second, it will create a folder containing an icon linked to
+    runemacs.exe (a wrapper program for invoking Emacs).  You can
+    also invoke addpm.exe by hand, giving the absolute directory name
+    of the installation directory as the first argument:
+
+        addpm.exe %INSTALL_DIR%
+
+    Now, to run Emacs, simply click on the icon in the newly created
+    folder or invoke runemacs.exe from a command prompt.
+
+    Another alternative for running Emacs is to use the emacs.bat batch
+    file in the bin directory (this was the traditional method of invoking
+    Emacs).  Edit the emacs.bat file to change the emacs_dir environment
+    variable to point to the Emacs installation directory and invoke the
+    emacs.bat file to run Emacs.
+
+    Note that, on Win95, you are likely to get "Out of environment space"
+    messages when invoking the emacs.bat batch file.  The problem is that
+    the console process in which the script is executed runs out of memory
+    in which to set the Emacs environment variables.  To get around this
+    problem, create a shortcut icon to the emacs.bat script.  Then right
+    click on the icon and select Properties.  In the dialog box that pops
+    up, select the Memory tab and then change the Environment memory
+    allocation from "Auto" to "1024".  Close the dialog box and then
+    double click on the icon to start Emacs.
+
+Debugging:
+
+(9) You should be able to debug Emacs using the MSVC debugger as you would
+    any other program.  To ensure that Emacs uses the lisp files associated
+    with the source distribution that you are debugging, it is useful
+    to set the Emacs environment variables to point Emacs to the
+    source distribution.  You can use the debug.bat batch file in this
+    directory to setup the environment and invoke msdev on the
+    emacs.exe executable.
+
+    Emacs functions implemented in C use a naming convention that
+    reflects their names in lisp.  The names of the C routines are
+    the lisp names prefixed with 'F', and with dashes converted to 
+    underscores.  For example, the function call-process is implemented
+    in C by Fcall_process.  Similarly, lisp variables are prefixed
+    with 'V', again with dashes converted to underscores.  These 
+    conventions enable you to easily set breakpoints or examine familiar
+    lisp variables by name.
+
+    Since Emacs data is often in the form of a lisp object, and the
+    Lisp_Object type is difficult to examine manually in the debugger,
+    Emacs provides a helper routine called debug_print that prints out
+    a readable representation of a Lisp_Object.  The output from 
+    debug_print is sent to stderr, and to the debugger via the
+    OutputDebugString routine.  The output sent to stderr should be
+    displayed in the console window that was opened when the emacs.exe
+    executable was started.  The output sent to the debugger should be
+    displayed in its "Debug" output window.
+
+    When you are in the process of debugging Emacs and you would like
+    to examine the contents of a Lisp_Object variable, popup the
+    QuickWatch window (QuickWatch has an eyeglass symbol on its button
+    in the toolbar).  In the text field at the top of the window, enter
+    debug_print(<variable>) and hit return.  For example, start
+    and run Emacs in the debugger until it is waiting for user input.
+    Then click on the Break button in the debugger to halt execution.
+    Emacs should halt in ZwUserGetMessage waiting for an input event.
+    Use the Call Stack window to select the procedure w32_msp_pump
+    up the call stack (see below for why you have to do this).  Open
+    the QuickWatch window and enter debug_print(Vexec_path).  Evaluating
+    this expression will then print out the contents of the lisp
+    variable exec-path.
+
+    If QuickWatch reports that the symbol is unknown, then check the
+    call stack in the Call Stack window.  If the selected frame in the
+    call stack is not an Emacs procedure, then the debugger won't
+    recognize Emacs symbols.  Instead, select a frame that is inside
+    an Emacs procedure and try using debug_print again.
+
+    If QuickWatch invokes debug_print but nothing happens, then check
+    the thread that is selected in the debugger.  If the selected
+    thread is not the last thread to run (the "current" thread), then
+    it cannot be used to execute debug_print.  Use the Debug menu
+    to select the current thread and try using debug_print again.
+    Note that the debugger halts execution (e.g., due to a breakpoint)
+    in the context of the current thread, so this should only be a problem
+    if you've explicitly switched threads.
diff --git a/nt/README b/nt/README
new file mode 100644
index 0000000000..816a8a2d49
--- /dev/null
+++ b/nt/README
@@ -0,0 +1,61 @@
+		 Emacs for Windows NT and Windows 95
+
+This directory contains support for compiling and running GNU Emacs on
+Windows NT and Windows 95.  This port supports all of the major
+functionality of the Unix version, including subprocesses, windowing
+features (fonts, colors, scroll bars, multiple frames, etc.), and
+networking support.
+
+Precompiled distributions are also available; ftp to
+
+	ftp://ftp.cs.washington.edu/pub/ntemacs/latest
+
+for the latest precompiled distributions.
+
+* Preliminaries
+
+To compile Emacs, you will need a Microsoft C compiler package.  For
+NT, this can be any of the SDK compilers from NT 3.1 and up, Microsoft
+Visual C++ for NT (versions 1.0 and up), or Microsoft Visual C++
+(versions 2.0 and up).  For Windows 95, this can be Microsoft Visual
+C++ versions 2.0 and up.
+
+* Building and installing
+
+See the INSTALL file in this directory for detailed instructions on
+building and installing Emacs on your system.
+
+* Further information
+
+If you have access to the World Wide Web, I would recommend pointing
+your favorite web browser to the document (if you haven't already):
+
+	http://www.cs.washington.edu/homes/voelker/ntemacs.html
+
+This web document serves as a FAQ and a source for further information
+about the port and related software packages.
+
+There is also a mailing list for discussing issues related to this
+port of Emacs.  For information about the list, send a message to
+ntemacs-users-request@cs.washington.edu with the word "info" in the
+*body* of the message.  To subscribe to the list, send a message to
+the same address with the word "subscribe" in the body of the message;
+similarly, to unsubscribe from the list, send a message with the word
+"unsubscribe" in the message body.
+
+You are also always welcome to send me mail directly.  If you don't
+hear from me immediately, however, don't worry; it sometimes takes me
+a few days (or longer) to get to all of my mail regarding Emacs.
+
+* Reporting bugs
+
+If you encounter bugs in this port of Emacs, first check the FAQ on
+the web page above to see if the bug is already known and if there are
+any workarounds.  If not, then I would like to hear about it; either
+send a bug report to the mailing list, or to me directly (I would
+recommend sending to the list first).
+
+Enjoy.
+
+-geoff
+(voelker@cs.washington.edu)
diff --git a/nt/TODO b/nt/TODO
new file mode 100644
index 0000000000..8cf30f81ea
--- /dev/null
+++ b/nt/TODO
@@ -0,0 +1,28 @@
+
+This is a list of known problems to date with the Windows NT/95 port of
+GNU Emacs.
+
+* Handle wildcards in ls-lisp (e.g., C-x d *.c).
+
+* Interactive subprocess output is buffered in jerky
+
+* Presently, C:\foo\bar and C:/foo/bar bring up two buffers on the same file.
+  Solve this by adding a switch that canonicalizes path separators
+  (e.g., make them all / or all \)?
+
+* call-process-region: Another tricky situation with binary and text modes.
+  An example by dsrosing@reston.ingr.com: use crypt++ to load compressed
+  data into a buffer, edit the buffer, save the data back out.  (Also
+  need to propagate the "/C" switch change sent the shell in crypt++.el
+  back to the author.)
+
+* Dired uses ls-lisp, which reports all files as being owned by the
+  current user.  Need to dig through the security descriptor to extract
+  the owner of the file (and the group?) using LookupAccountSid.
+
+* Integrate the build for NT into the GNU config process once
+  a decent shell becomes freely available
+
+* Integrate networking.
+
+* Fix Win95 subprocesses.
diff --git a/nt/icons/emacs.ico b/nt/icons/emacs.ico
new file mode 100644
index 0000000000..39a6a6a7c8
--- /dev/null
+++ b/nt/icons/emacs.ico
diff --git a/nt/icons/gnu2a32.ico b/nt/icons/gnu2a32.ico
new file mode 100644
index 0000000000..c653ba9049
--- /dev/null
+++ b/nt/icons/gnu2a32.ico
diff --git a/nt/icons/gnu2a32t.ico b/nt/icons/gnu2a32t.ico
new file mode 100644
index 0000000000..3b32e3a15d
--- /dev/null
+++ b/nt/icons/gnu2a32t.ico
diff --git a/nt/icons/gnu2b48.ico b/nt/icons/gnu2b48.ico
new file mode 100644
index 0000000000..4c2c1d9e71
--- /dev/null
+++ b/nt/icons/gnu2b48.ico
diff --git a/nt/icons/gnu2b48t.ico b/nt/icons/gnu2b48t.ico
new file mode 100644
index 0000000000..3154c47966
--- /dev/null
+++ b/nt/icons/gnu2b48t.ico
diff --git a/nt/icons/gnu3b32.ico b/nt/icons/gnu3b32.ico
new file mode 100644
index 0000000000..eb49656fa6
--- /dev/null
+++ b/nt/icons/gnu3b32.ico
diff --git a/nt/icons/gnu3b32t.ico b/nt/icons/gnu3b32t.ico
new file mode 100644
index 0000000000..24ac5593bf
--- /dev/null
+++ b/nt/icons/gnu3b32t.ico
diff --git a/nt/icons/gnu4g48.ico b/nt/icons/gnu4g48.ico
new file mode 100644
index 0000000000..88fdab3111
--- /dev/null
+++ b/nt/icons/gnu4g48.ico
diff --git a/nt/icons/gnu4g48t.ico b/nt/icons/gnu4g48t.ico
new file mode 100644
index 0000000000..883b736a68
--- /dev/null
+++ b/nt/icons/gnu4g48t.ico
diff --git a/nt/icons/gnu5w32.ico b/nt/icons/gnu5w32.ico
new file mode 100644
index 0000000000..ab9c039151
--- /dev/null
+++ b/nt/icons/gnu5w32.ico
diff --git a/nt/icons/gnu5w32t.ico b/nt/icons/gnu5w32t.ico
new file mode 100644
index 0000000000..cc25be86b8
--- /dev/null
+++ b/nt/icons/gnu5w32t.ico
diff --git a/nt/icons/gnu6w48.ico b/nt/icons/gnu6w48.ico
new file mode 100644
index 0000000000..1c83c10ed9
--- /dev/null
+++ b/nt/icons/gnu6w48.ico
diff --git a/nt/icons/gnu6w48t.ico b/nt/icons/gnu6w48t.ico
new file mode 100644
index 0000000000..a4228ee5f9
--- /dev/null
+++ b/nt/icons/gnu6w48t.ico
diff --git a/nt/icons/gnu7.ico b/nt/icons/gnu7.ico
new file mode 100644
index 0000000000..5a32b413be
--- /dev/null
+++ b/nt/icons/gnu7.ico
diff --git a/nt/icons/gnu8.ico b/nt/icons/gnu8.ico
new file mode 100644
index 0000000000..4583fc800f
--- /dev/null
+++ b/nt/icons/gnu8.ico
diff --git a/nt/icons/gnu9.ico b/nt/icons/gnu9.ico
new file mode 100644
index 0000000000..8c4830e24c
--- /dev/null
+++ b/nt/icons/gnu9.ico
diff --git a/nt/icons/sink.ico b/nt/icons/sink.ico
new file mode 100644
index 0000000000..d0804108af
--- /dev/null
+++ b/nt/icons/sink.ico
diff --git a/update-subdirs b/update-subdirs
new file mode 100755
index 0000000000..94eb1fd4e2
--- /dev/null
+++ b/update-subdirs
@@ -0,0 +1,23 @@
+#!/bin/sh
+# Write into $1/subdirs.el a list of subdirs of directory $1.
+cd $1
+for file in *; do
+    case $file in
+	*.elc | *.el | term | RCS | Old | . | .. | =* | *~ | *.orig | *.rej)
+	  ;;	
+	*)
+	    if [ -d $file ]; then
+	      subdirs="\"$file\" $subdirs"
+	    fi
+	  ;;
+    esac
+done
+
+if [ "x$subdirs" = x ]; then
+  rm -f subdirs.el
+else
+  echo ";; In load-path, after this directory should come
+;; certain of its subdirectories.  Here we specify them." > subdirs.el
+
+  echo "(normal-top-level-add-to-load-path '($subdirs))" >> subdirs.el
+fi